Messages in this thread | | | Date | Mon, 18 Apr 2005 13:20:07 +0100 | From | James Pearson <> | Subject | Kernel BUG in khubd with 2.4.30 x86_64 |
| |
I'm using a Dell PowerEdge 2850 with dual 3.6Ghz Xeon EM64T CPUs.
Using a vanilla 2.4.30 SMP x86_64 kernel, when I try to modprobe usb-uhci I get:
kernel BUG in header file at line 160 Kernel BUG at panic:149 invalid operand: 0000
dmesg and ksymoops output below.
Thanks
James Pearson
dmesg:
usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 17:44:32 Apr 17 2005 usb-uhci.c: High bandwidth mode enabled PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0x9ce0, IRQ 16 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0x9cc0, IRQ 19 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0x9ca0, IRQ 18 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver hub.c: new USB device 00:1d.0-1, assigned address 2 kernel BUG in header file at line 160 Kernel BUG at panic:149 invalid operand: 0000 CPU 1 Pid: 1380, comm: khubd Not tainted RIP: 0010:[<ffffffff80121ae4>] RSP: 0018:000001023c3ddcd8 EFLAGS: 00010016 RAX: 0000000000000026 RBX: 000001023e8f6880 RCX: 0000000000000000 RDX: 000001023e163f08 RSI: ffffffff803e4000 RDI: 0000000000000000 RBP: 000001023eac6400 R08: ffffffffffffffff R09: 000000000000000d R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000002 R14: 000001023c4dcf80 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff803daa00(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000004031a0 CR3: 000000000d674000 CR4: 00000000000006a0 Process khubd (pid: 1380, stackpage=1023c3dd000) Stack: 000001023c3ddcd8 0000000000000018 ffffffff80121ae4 000001023eac6400 ffffffffa013b8c4 000001023c3ddd28 0000000000000202 000001023d641200 00000000000001f4 000001023e8f6880 000001023c3ddd48 000001023c3ddd68 Call Trace: [<ffffffff80121ae4>] [<ffffffffa013b8c4>] [<ffffffffa012443a>] [<ffffffffa012455c>] [<ffffffffa01246e3>] [<ffffffffa012479d>] [<ffffffffa0125486>] [<ffffffffa012602f>] [<ffffffffa0127c1a>] [<ffffffffa0127dbf>] [<ffffffffa0127f95>] [<ffffffff80110888>] [<ffffffffa0127f40>] [<ffffffff80110880>]
Code: 0f 0b 02 79 29 80 ff ff ff ff 95 00 eb fe 90 90 90 90 90 90 RIP [<ffffffff80121ae4>] RSP <000001023c3ddcd8>
ksymoops:
ksymoops 2.4.11 on x86_64 2.4.30. Options used -V (default) -k /proc/ksyms (default) -l /proc/modules (default) -o /lib/modules/2.4.30/ (default) -m /boot/System.map-2.4.30 (specified)
Error (expand_objects): cannot stat(/lib/xfs.o) for xfs Error (expand_objects): cannot stat(/lib/raid1.o) for raid1 Error (expand_objects): cannot stat(/lib/mptscsih.o) for mptscsih Error (expand_objects): cannot stat(/lib/mptbase.o) for mptbase Error (expand_objects): cannot stat(/lib/sd_mod.o) for sd_mod Error (expand_objects): cannot stat(/lib/scsi_mod.o) for scsi_mod SGI XFS with no debug enabled e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex kernel BUG in header file at line 160 Kernel BUG at panic:149 invalid operand: 0000 CPU 1 Pid: 1380, comm: khubd Not tainted RIP: 0010:[<ffffffff80121ae4>] Using defaults from ksymoops -t elf64-x86-64 -a i386:x86-64 RSP: 0018:000001023c3ddcd8 EFLAGS: 00010016 RAX: 0000000000000026 RBX: 000001023e8f6880 RCX: 0000000000000000 RDX: 000001023e163f08 RSI: ffffffff803e4000 RDI: 0000000000000000 RBP: 000001023eac6400 R08: ffffffffffffffff R09: 000000000000000d R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000002 R14: 000001023c4dcf80 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff803daa00(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000004031a0 CR3: 000000000d674000 CR4: 00000000000006a0 Process khubd (pid: 1380, stackpage=1023c3dd000) Stack: 000001023c3ddcd8 0000000000000018 ffffffff80121ae4 000001023eac6400 ffffffffa013b8c4 000001023c3ddd28 0000000000000202 000001023d641200 00000000000001f4 000001023e8f6880 000001023c3ddd48 000001023c3ddd68 Call Trace: [<ffffffff80121ae4>] [<ffffffffa013b8c4>] [<ffffffffa012443a>] [<ffffffffa012455c>] [<ffffffffa01246e3>] [<ffffffffa012479d>] [<ffffffffa0125486>] [<ffffffffa012602f>] [<ffffffffa0127c1a>] [<ffffffffa0127dbf>] [<ffffffffa0127f95>] [<ffffffff80110888>] [<ffffffffa0127f40>] [<ffffffff80110880>] Code: 0f 0b 02 79 29 80 ff ff ff ff 95 00 eb fe 90 90 90 90 90 90
>>RIP; ffffffff80121ae4 <__out_of_line_bug+14/30> <=====
>>RSI; ffffffff803e4000 <init_task_union+0/2000>
Trace; ffffffff80121ae4 <__out_of_line_bug+14/30> Trace; ffffffffa013b8c4 <[usb-uhci]uhci_submit_urb+284/410> Trace; ffffffffa012443a <[usbcore]usb_submit_urb+2a/40> Trace; ffffffffa012455c <[usbcore]usb_start_wait_urb+ac/1b0> Trace; ffffffffa01246e3 <[usbcore]usb_internal_control_msg+83/c0> Trace; ffffffffa012479d <[usbcore]usb_control_msg+7d/a0> Trace; ffffffffa0125486 <[usbcore]usb_set_address+46/50> Trace; ffffffffa012602f <[usbcore]usb_new_device+1f/1a0> Trace; ffffffffa0127c1a <[usbcore]usb_hub_port_connect_change+1ea/240> Trace; ffffffffa0127dbf <[usbcore]usb_hub_events+14f/2d0> Trace; ffffffffa0127f95 <[usbcore]usb_hub_thread+55/140> Trace; ffffffff80110888 <child_rip+8/10> Trace; ffffffffa0127f40 <[usbcore]usb_hub_thread+0/140> Trace; ffffffff80110880 <child_rip+0/10>
Code; ffffffff80121ae4 <__out_of_line_bug+14/30> 0000000000000000 <_RIP>: Code; ffffffff80121ae4 <__out_of_line_bug+14/30> <===== 0: 0f 0b ud2a <===== Code; ffffffff80121ae6 <__out_of_line_bug+16/30> 2: 02 79 29 add 0x29(%rcx),%bh Code; ffffffff80121ae9 <__out_of_line_bug+19/30> 5: 80 ff ff cmp $0xff,%bh Code; ffffffff80121aec <__out_of_line_bug+1c/30> 8: ff (bad) Code; ffffffff80121aed <__out_of_line_bug+1d/30> 9: ff 95 00 eb fe 90 callq *0xffffffff90feeb00(%rbp) Code; ffffffff80121af3 <__out_of_line_bug+23/30> f: 90 nop Code; ffffffff80121af4 <__out_of_line_bug+24/30> 10: 90 nop Code; ffffffff80121af5 <__out_of_line_bug+25/30> 11: 90 nop Code; ffffffff80121af6 <__out_of_line_bug+26/30> 12: 90 nop Code; ffffffff80121af7 <__out_of_line_bug+27/30> 13: 90 nop
6 errors issued. Results may not be reliable. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |