Messages in this thread | | | Date | Sun, 9 May 2004 20:44:15 -0400 (EDT) | From | Patrick Reynolds <> | Subject | ACPI and broken PCI IRQ sharing on Asus M5N laptop |
| |
I posted yesterday about how the built-in psmouse in my Asus M5N (M5200N) laptop is broken under recent 2.6 kernels. I believe I have tracked the problem down to broken IRQ sharing. It's broken under 2.6.2 through 2.6.6-rc3-bk11, but it works fine under 2.6.1.
Booting with default parameters puts the i8042 psmouse channel, the Intel 8x0 sound card, and the Cardbus controller all on IRQ 12. The mouse is almost unusable, sampling 3-4 times per second. The sound works fine. In /proc/interrupts I get 12: 310 XT-PIC i8042, Intel 82801DB-ICH4, yenta The interrupt count goes up when I play MP3s, but not when I move the mouse.
Booting with acpi=noirq (or acpi=off or pci=noacpi under 2.6.5) makes the mouse work, but breaks several other devices, including sound. From dmesg: PCI: Probing PCI hardware PCI: Using IRQ router default [8086/24cc] at 0000:00:1f.0 PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask PCI: IRQ 0 for device 0000:00:1f.5 doesn't match PIRQ mask - try pci=usepirqmask PCI: IRQ 0 for device 0000:00:1f.6 doesn't match PIRQ mask - try pci=usepirqmask PCI: IRQ 0 for device 0000:01:03.0 doesn't match PIRQ mask - try pci=usepirqmask PCI: IRQ 0 for device 0000:01:03.1 doesn't match PIRQ mask - try pci=usepirqmask [snip] PCI: Enabling device 0000:00:1f.5 (0005 -> 0007) PCI: IRQ 0 for device 0000:00:1f.5 doesn't match PIRQ mask - try pci=usepirqmask PCI: No IRQ known for interrupt pin B of device 0000:00:1f.5. Please try using pci=biosirq. unable to grab IRQ 0 Intel ICH: probe of 0000:00:1f.5 failed with error -16 In this case, /proc/interrupts shows only the i8042 on IRQ 12, and the interrupt count increments as expected (about 75/sec) when I move the mouse.
Enabling pci=biosirq didn't help. Sound still didn't work: PCI: Enabling device 0000:00:1f.5 (0005 -> 0007) PCI: IRQ 0 for device 0000:00:1f.5 doesn't match PIRQ mask - try pci=usepirqmask PCI: No IRQ known for interrupt pin B of device 0000:00:1f.5. unable to grab IRQ 0 Intel ICH: probe of 0000:00:1f.5 failed with error -16
Finally, enabling pci=biosirq and pci=usepirqmask together didn't help either. It got rid of a few warnings (basically anything telling me to try biosirq or usepirqmask!), but the sound still couldn't get an IRQ: PCI: Enabling device 0000:00:1f.5 (0005 -> 0007) PCI: No IRQ known for interrupt pin B of device 0000:00:1f.5. unable to grab IRQ 0 Intel ICH: probe of 0000:00:1f.5 failed with error -16
So I'm stuck with either sound or mouse, but not both at once unless I roll back to 2.6.1. Any ideas?
I've put my dmesg from my last 5 reboots here: http://www.cs.duke.edu/~reynolds/dmesg2.txt
Here's the output of lspci -v: http://www.cs.duke.edu/~reynolds/pci.txt
In case it's an ACPI issue, here's my DSDT: http://www.cs.duke.edu/~reynolds/dsdt.bin
--Patrick - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |