Messages in this thread Patch in this message | | | Date | Sun, 30 May 2004 21:38:00 +0200 | From | Sam Ravnborg <> | Subject | [RFC] kbuild: Specify default target during configuration |
| |
Following patchs allows one to specify default target when doing make *config. This has the advantage that kbuild knows the final target, a knowledge that is required when building rpm's or deb's.
The following patch introduce selecting default target for i386, and is mainly a RFC. If there is no big complains I will update it to cover a few more architectures before submitting.
Comments to the suggested help texts is also appreciated.
Sam
===== arch/i386/Kconfig 1.121 vs edited ===== --- 1.121/arch/i386/Kconfig 2004-05-10 13:25:50 +02:00 +++ edited/arch/i386/Kconfig 2004-05-30 21:25:41 +02:00 @@ -29,6 +29,42 @@ bool default y +choice + prompt "Default kernel image" + default KERNEL_IMAGE_BZIMAGE + help + Specify which kernel image to be build when executing 'make' with + no arguments. + +config KERNEL_IMAGE_BZIMAGE + bool "bzImage - Compressed kernel image" + help + bzImage - located at arch/i386/boot/bzImage. + bzImage can accept larger kernels than zImage + +config KERNEL_IMAGE_ZIMAGE + bool "zImage - Compressed kernel image" + help + zImage - located at arch/i386/boot/zImage. + zImage is seldom used. zImage supports smaller kernels than bzImage, + and is only used in special situations. + +config KERNEL_IMAGE_VMLINUX + bool "vmlinux - the bare kernel" + help + vmlinux - located at the root of the kernel tree + vmlinux contains the kernel image with no additional bootloader. + vmlinux is seldom used as target for i386. + +endchoice + +config KERNEL_IMAGE + string + default arch/i386/boot/bzImage if KERNEL_IMAGE_BZIMAGE + default arch/i386/boot/zImage if KERNEL_IMAGE_ZIMAGE + default vmlinux if KERNEL_IMAGE_VMLINUX + + source "init/Kconfig" ===== Makefile 1.492 vs edited ===== --- 1.492/Makefile 2004-05-30 08:24:06 +02:00 +++ edited/Makefile 2004-05-30 21:35:32 +02:00 @@ -409,13 +409,6 @@ scripts_basic: include/linux/autoconf.h - -# That's our default target when none is given on the command line -# Note that 'modules' will be added as a prerequisite as well, -# in the CONFIG_MODULES part below - -all: vmlinux - # Objects we will link into vmlinux / subdirs we need to visit init-y := init/ drivers-y := drivers/ sound/ @@ -448,6 +441,11 @@ endif include $(srctree)/arch/$(ARCH)/Makefile + +# Let all: depend on target selected in .config +# Hereby user only have to issue 'make' to build the kernel, including +# selected kernel +all: $(subst ",,$(CONFIG_KERNEL_IMAGE)) ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE CFLAGS += -Os ===== arch/i386/Makefile 1.67 vs edited ===== --- 1.67/arch/i386/Makefile 2004-05-15 08:11:50 +02:00 +++ edited/arch/i386/Makefile 2004-05-30 21:27:17 +02:00 @@ -115,18 +115,20 @@ boot := arch/i386/boot -.PHONY: zImage bzImage compressed zlilo bzlilo \ - zdisk bzdisk fdimage fdimage144 fdimage288 install +# Lot's of documentation refer to these, so keep the short versions for now +.PHONY: bzImage zImage compressed +bzImage: $(boot)/bzImage +zImage: $(boot)/zImage +compressed: $(boot)/zImage -all: bzImage +# Target's that install the kernel +.PHONY: zlilo bzlilo zdisk bzdisk fdimage fdimage144 fdimage288 install BOOTIMAGE=arch/i386/boot/bzImage -zImage zlilo zdisk: BOOTIMAGE=arch/i386/boot/zImage +zlilo zdisk: BOOTIMAGE=arch/i386/boot/zImage -zImage bzImage: vmlinux - $(Q)$(MAKE) $(build)=$(boot) $(BOOTIMAGE) - -compressed: zImage +$(boot)/zImage $(boot)/bzImage: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $@ zlilo bzlilo: vmlinux $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) zlilo - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |