Messages in this thread | | | Date | Sun, 16 May 2004 00:18:21 +0200 | From | Sven Wilhelm <> | Subject | Problems with radeonfb |
| |
Hi list,
I have problems with the radeonfb on 2.6.6 and also the older 2.6er releases.
the source is a vanilla kernel only patched with the hostap driver for wlan.
distribution: debian sid
the dmesg output:
------------------ Linux version 2.6.6-icecrash-blade (sven@blade) (gcc-Version 3.3.3 20040125 (prerelease) (Debian)) #1 Sat May 15 22:52:05 CEST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fef0000 (usable) BIOS-e820: 000000003fef0000 - 000000003fefb000 (ACPI data) BIOS-e820: 000000003fefb000 - 000000003ff00000 (ACPI NVS) BIOS-e820: 000000003ff00000 - 000000003ff80000 (usable) BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. On node 0 totalpages: 229376 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f6390 ACPI: RSDT (v001 PTLTD Sheeks 0x06040000 LTP 0x00000000) @ 0x3fef6b56 ACPI: FADT (v001 Clevo 845MP 0x06040000 PTL 0x00000050) @ 0x3fefaf2d ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x3fefafa1 ACPI: DSDT (v001 INTEL 845M 0x06040000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Built 1 zonelists Kernel command line: root=/dev/hda5 ro root=/dev/hda5 acpi=force pmdisk=/dev/hda2 No local APIC present or hardware disabled Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1800.243 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Memory: 905768k/917504k available (2333k kernel code, 10992k reserved, 834k data, 244k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3563.52 BogoMIPS Security Scaffold v1.0.0 initialized Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfd9c0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *11) ACPI: PCI Interrupt Link [LNKB] (IRQs *11) ACPI: PCI Interrupt Link [LNKC] (IRQs *5) ACPI: PCI Interrupt Link [LNKD] (IRQs *9) ACPI: Embedded Controller [EC] (gpe 28) SCSI subsystem initialized ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: Using ACPI for IRQ routing radeonfb: Invalid ROM signature 0 should be 0xaa55 radeonfb: Retreived PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=166.00 MHz Non-DDC laptop panel detected radeonfb: Monitor 1 type LCD found radeonfb: Monitor 2 type no found radeonfb: panel ID string: CPT CLAA150PA01 radeonfb: detected LVDS panel size from BIOS: 1400x1050 radeondb: BIOS provided dividers will be used radeonfb: Power Management enabled for Mobility chipsets radeonfb: ATI Radeon LW DDR SGRAM 64 MB kobject_register failed for radeonfb (-17) Call Trace: [<c0229982>] kobject_register+0x57/0x59 [<c0279e08>] bus_add_driver+0x4a/0x9d [<c027a225>] driver_register+0x2f/0x33 [<c02332a2>] pci_create_newid_file+0x27/0x29 [<c02336a8>] pci_register_driver+0x5c/0x84 [<c0430737>] radeonfb_old_init+0xf/0x1d [<c04305bb>] fbmem_init+0x9d/0xe8 [<c042cb28>] chr_dev_init+0x80/0x9e [<c041a78e>] do_initcalls+0x28/0xb4 [<c012904a>] init_workqueues+0x17/0x31 [<c01002b4>] init+0x0/0x150 [<c01002ec>] init+0x38/0x150 [<c0104258>] kernel_thread_helper+0x0/0xb [<c010425d>] kernel_thread_helper+0x5/0xb
Simple Boot Flag at 0x38 set to 0x1 Machine check exception polling timer started. audit: initializing netlink socket (disabled) audit(1084657800.854:0): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SGI XFS with ACLs, security attributes, realtime, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API Console: switching to colour frame buffer device 175x65 Real Time Clock Driver v1.12 [drm] Initialized radeon 1.9.0 20020828 on minor 0 ------------------
i have appended the lspci-output of the graphic card. for more question feel free to ask.
thanks and greetings
sven
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] (prog-if 00 [VGA]) Subsystem: CLEVO/KAPOK Computer: Unknown device 5600 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+ Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 11 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 3000 [size=256] Region 2: Memory at e8100000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- [unhandled content-type:application/pgp-signature] | |