lkml.org 
[lkml]   [2004]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[2.4.25] PCMCIA PCI: No IRQ for interrupt pin A and failed to allocate shared interrupt
Hello,

I am using a Gateway 600YG2 laptop (Intel P4-M, PCMCIA TI PCI1520 controller)
on 2.4.25. I have 3 different pcmcia firewire cards. When I insert module
yenta_socket with any of those cards, I get "PCI: No IRQ for interrupt pin A of
device 03:00.0 please try using pci=biosirq". After this error, when I run the
modprobe ieee1394 and ohci1394, I get "ohci1394: failed to allocate shared
interrupt 10". The same pcmcia firewire cards work on old Gateway 9300, 9500
laptop and IBM T22 laptop.
BTW, my Netgear pcmcia 10/100mb ethernet card works on the Gateway 600YG2
laptop. Also my USB pen drives are not working too. The bootparameter
pci=biosirq doesn't seem to work.
It worked fine with 2.4.20 without any problems. Could someone help me to fix
this problem on 2.4.25?

Thanks,
Jin


__________________________________
Do you Yahoo!?
Yahoo! Small Business $15K Web Design Giveaway
http://promotions.yahoo.com/design_giveaway/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:02    [W:0.153 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site