lkml.org 
[lkml]   [2004]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 8139too not working in 2.6
Mirko Caserta wrote:
>
> Yes, I know, it's a damn cheap eth card and I should get it replaced :)
>
> Besides that, this card works just fine with 2.4.25 while it refuses to
> work on a recent 2.6 kernel. I tried 2.6.5 and even
> 2.6.5-rc2-mm2-broken-out with no luck.
>

Mine works fine in 2.6.5:

eth0: RealTek RTL8139 at 0xca844000, xx:xx:xx:xx:xx:xx, IRQ 5
eth0: Identified 8139 chip type 'RTL-8139C'
eth1: RealTek RTL8139 at 0xca895000, xx:xx:xx:xx:xx:xx, IRQ 3
eth1: Identified 8139 chip type 'RTL-8139C'
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1

lspci:

00:03.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
00:04.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)

Derek


--
+---------------------------------------------------------------+
| Derek Chen-Becker |
| derek@chen-becker.org |
| http://chen-becker.org |
| |
| PGP key available on request or from public key servers |
| ID: 21A7FB53 |
| Fngrprnt: 209A 77CA A4F9 E716 E20C 6348 B657 77EC 21A7 FB53 |
+---------------------------------------------------------------+
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:02    [W:0.097 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site