lkml.org 
[lkml]   [2004]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: flooded by "CPU#0: Running in modulated clock mode"
On Wed, 21 Apr 2004, Alexey Mahotkin wrote:

> Is that ok that the status is flapping?
>
> >> CPU#0: Running in modulated clock mode
> >> CPU#0: Temperature/speed normal
> >> CPU#0: Temperature above threshold
>
> Or is it so that CPU switches to MCM, instantly cools down, switches
> to normal speed, instantly heats up and so on?

Yes it doesn't modulate indefinitely, it means that your cooling is
inadequate.

> > The threshold is set so that its below the
> > catastrophic shutdown threshold. so ~60C sounds right considering your
> > processor will probably shutdown at 80C.
>
> Who did set that threshold and how could I change it? I'd like it to
> be ~72C, because the machine is 1U and the higher temperature is kind
> of "normal" there.

If i recall correctly it's hardware set, i'm not sure if BIOSes can modify
that these days. One thing you may want to note is that in the modulated
state the processor doesn't process interrupts and runs at a 50% clock
duty cycle. So there is a large performance loss when its running in this
mode. You really should consider looking into your cooling...
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:02    [W:0.222 / U:1.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site