Messages in this thread | | | Date | Mon, 12 Apr 2004 06:54:30 -0700 (PDT) | From | Jin Suh <> | Subject | [2.4.25] PCMCIA PCI: No IRQ for interrupt pin A and failed to allocate shared interrupt |
| |
Hello,
I am using a Gateway 600YG2 laptop (Intel P4-M, PCMCIA TI PCI1520 controller) on 2.4.25. I have 3 different pcmcia firewire cards. When I insert module yenta_socket with any of those cards, I get "Yenta ISA IRQ mask 0x0a98, PCI irq 0" and "PCI: No IRQ for interrupt pin A of device 03:00.0 please try using pci=biosirq". After this error, when I run the modprobe ieee1394 and ohci1394, I get "ohci1394: failed to allocate shared interrupt 10". The same pcmcia firewire cards work on old Gateway 9300, 9500 laptop and IBM T22 laptop. BTW, my Netgear pcmcia 10/100mb ethernet card works on the Gateway 600YG2 laptop. Also my USB pen drives are not working too. The bootparameter pci=biosirq doesn't seem to work. It worked fine with 2.4.20 without any problems. Could someone help me to fix this problem on 2.4.25? I have buillt both of 2.4.20 and 2.4.25 without ACPI.
Thanks, Jin
DMESG output ------------------------------------------------------------------------- ACPI: RSDP (v000 PTLTD ) @ 0x000f6620 ACPI: RSDT (v001 GATEWA 602 0x20021104 LTP 0x00000000) @ 0x1fef8313 ACPI: FADT (v001 GATEWA 602 0x20021104 PTL 0x0000001e) @ 0x1fefef64 ACPI: BOOT (v001 GATEWA 602 0x20021104 LTP 0x00000001) @ 0x1fefefd8 ACPI: DSDT (v001 GATEWA 602 0x20021104 MSFT 0x0100000e) @ 0x00000000 Kernel command line: initrd=ramdisk.img root=/dev/ram0 bickrootfs=tmpfs vga=791 BOOT_IMAGE=linux No local APIC present or hardware disabled ......... Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 10 for device 02:02.0 PCI: Sharing IRQ 10 with 00:1f.1 PCI: Sharing IRQ 10 with 02:02.1 PCI: Found IRQ 10 for device 02:02.1 PCI: Sharing IRQ 10 with 00:1f.1 PCI: Sharing IRQ 10 with 02:02.0 Yenta ISA IRQ mask 0x0a98, PCI irq 0 Socket status: 30000011 Yenta ISA IRQ mask 0x0a98, PCI irq 0 Socket status: 30000020 cs: cb_alloc(bus 7): vendor 0x104c, device 0x8024 PCI: Enabling device 07:00.0 (0000 -> 0002) PCI: No IRQ known for interrupt pin A of device 07:00.0. Please try using pci=biosirq. ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org> PCI: Found IRQ 10 for device 02:05.0 PCI: Sharing IRQ 10 with 00:1f.3 PCI: Sharing IRQ 10 with 00:1f.6 ohci1394: Failed to allocate shared interrupt 10 PCI: No IRQ known for interrupt pin A of device 07:00.0. Please try using pci=biosirq. ohci1394: Failed to allocate shared interrupt 0 sbp2: $Rev: 1074 $ Ben Collins <bcollins@debian.org>
__________________________________ Do you Yahoo!? Yahoo! Tax Center - File online by April 15th http://taxes.yahoo.com/filing.html - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |