Messages in this thread | | | Subject | 2.6.3 AGP interrupt not shown in /proc/interrupts? | From | "Michael Frank" <> | Date | Sun, 07 Mar 2004 12:23:58 +0800 |
| |
P4, running 2.6.3 with APM using sis-agp.
IRQ10 is used by AGP, why is it not listed in /proc/interrupts?
Regards Michael
CPU0 0: 248480 XT-PIC timer 1: 13 XT-PIC i8042 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 11: 1348 XT-PIC eth0 12: 58 XT-PIC i8042 14: 2246 XT-PIC ide0 NMI: 0 ERR: 0 C ide0 NMI: 0 ERR: 0
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] SiS650/651/M650/740 PCI/AGP VGA Display Adapter (prog-if 00 [VGA]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5339 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 10 BIST result: 00 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at eb000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at d000 [size=128] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] AGP version 2.0 Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2,x4 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> 00: 39 10 25 63 03 00 b0 02 00 00 00 03 00 00 00 80 10: 08 00 00 e0 00 00 00 eb 01 d0 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 39 53 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00 40: 01 50 02 06 00 00 00 00 00 00 00 00 00 00 00 00 50: 02 00 20 00 07 02 00 0f 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |