Messages in this thread | | | Date | Sun, 14 Mar 2004 17:57:56 -0800 (PST) | From | Shi Jin <> | Subject | AIC7899 SCSI driver problem:DV failed to configure device. |
| |
Hi there,
I am having this problem for all the kernels I tried: 2.4.18,2.4.25 and 2.6.3.The message is: ******************begin********************* SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec aic7899 Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec aic7899 Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
blk: queue f797b818, I/O limit 4095Mb (mask 0xffffffff) scsi0:A:0:0: DV failed to configure device. Please file a bug report against this driver. (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 31, 16bit) Vendor: Model: Rev: 0001 Type: Direct-Access ANSI SCSI revision: 03 blk: queue f797b618, I/O limit 4095Mb (mask 0xffffffff) scsi0:A:0:0: Tagged Queuing enabled. Depth 32 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 2578022400 512-byte hdwr sectors (1319947 MB) sda: sda1 sda2 sda3 ******************end ************************* The output of lspci -v is *****************begin******************** 00:0a.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) Subsystem: Tyan Computer: Unknown device 2468 Flags: bus master, 66Mhz, medium devsel, latency 72, IRQ 20 BIST result: 00 I/O ports at 1000 [disabled] [size=256] Memory at f4000000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: <available only to root>
00:0a.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) Subsystem: Tyan Computer: Unknown device 2468 Flags: bus master, 66Mhz, medium devsel, latency 72, IRQ 21 BIST result: 00 I/O ports at 1400 [disabled] [size=256] Memory at f4001000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: <available only to root> ******************end************************
An external IDE RAID(level 5) is connected to this SCSI port. It is working fine for now being, but I don't know why the DV failed to configure error happens. So I report it here.
Please tell me what else information you need. Thank you very much.
Shi Jin
__________________________________ Do you Yahoo!? Yahoo! Mail - More reliable, more storage, less spam http://mail.yahoo.com - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |