Messages in this thread Patch in this message | | | Subject | [patch 5/6] delete unused file | From | domen@coderock ... | Date | Sun, 26 Dec 2004 16:33:08 +0100 |
| |
Remove nowhere referenced file. (egrep "filename\." didn't find anything)
Signed-off-by: Domen Puncer <domen@coderock.org> ---
kj/drivers/pcmcia/au1000_pb1x00.c | 412 -------------------------------------- 1 files changed, 412 deletions(-)
diff -L drivers/pcmcia/au1000_pb1x00.c -puN drivers/pcmcia/au1000_pb1x00.c~remove_file-drivers_pcmcia_au1000_pb1x00.c /dev/null --- kj/drivers/pcmcia/au1000_pb1x00.c +++ /dev/null 2004-12-24 01:21:08.000000000 +0100 @@ -1,412 +0,0 @@ -/* - * - * Alchemy Semi Pb1x00 boards specific pcmcia routines. - * - * Copyright 2002 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/ioport.h> -#include <linux/kernel.h> -#include <linux/tqueue.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/proc_fs.h> -#include <linux/types.h> - -#include <pcmcia/version.h> -#include <pcmcia/cs_types.h> -#include <pcmcia/cs.h> -#include <pcmcia/ss.h> -#include <pcmcia/bulkmem.h> -#include <pcmcia/cistpl.h> -#include <pcmcia/bus_ops.h> -#include "cs_internal.h" - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/system.h> - -#include <asm/au1000.h> -#include <asm/au1000_pcmcia.h> - -#define debug(fmt, arg...) do { } while (0) - -#ifdef CONFIG_MIPS_PB1000 -#include <asm/pb1000.h> -#define PCMCIA_IRQ AU1000_GPIO_15 -#elif defined (CONFIG_MIPS_PB1500) -#include <asm/pb1500.h> -#define PCMCIA_IRQ AU1000_GPIO_11 /* fixme */ -#elif defined (CONFIG_MIPS_PB1100) -#include <asm/pb1100.h> -#define PCMCIA_IRQ AU1000_GPIO_11 -#endif - -static int pb1x00_pcmcia_init(struct pcmcia_init *init) -{ -#ifdef CONFIG_MIPS_PB1000 - u16 pcr; - pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST; - - au_writel(0x8000, PB1000_MDR); /* clear pcmcia interrupt */ - au_sync_delay(100); - au_writel(0x4000, PB1000_MDR); /* enable pcmcia interrupt */ - au_sync(); - - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0); - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,1); - au_writel(pcr, PB1000_PCR); - au_sync_delay(20); - - return PCMCIA_NUM_SOCKS; - -#else /* fixme -- take care of the Pb1500 at some point */ - - u16 pcr; - pcr = au_readw(PB1100_MEM_PCMCIA) & ~0xf; /* turn off power */ - pcr &= ~(PB1100_PC_DEASSERT_RST | PB1100_PC_DRV_EN); - au_writew(pcr, PB1100_MEM_PCMCIA); - au_sync_delay(500); - return PCMCIA_NUM_SOCKS; -#endif -} - -static int pb1x00_pcmcia_shutdown(void) -{ -#ifdef CONFIG_MIPS_PB1000 - u16 pcr; - pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST; - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0); - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,1); - au_writel(pcr, PB1000_PCR); - au_sync_delay(20); - return 0; -#else - u16 pcr; - pcr = au_readw(PB1100_MEM_PCMCIA) & ~0xf; /* turn off power */ - pcr &= ~(PB1100_PC_DEASSERT_RST | PB1100_PC_DRV_EN); - au_writew(pcr, PB1100_MEM_PCMCIA); - au_sync_delay(2); - return 0; -#endif -} - -static int -pb1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state) -{ - u32 inserted0, inserted1; - u16 vs0, vs1; - -#ifdef CONFIG_MIPS_PB1000 - vs0 = vs1 = (u16)au_readl(PB1000_ACR1); - inserted0 = !(vs0 & (ACR1_SLOT_0_CD1 | ACR1_SLOT_0_CD2)); - inserted1 = !(vs1 & (ACR1_SLOT_1_CD1 | ACR1_SLOT_1_CD2)); - vs0 = (vs0 >> 4) & 0x3; - vs1 = (vs1 >> 12) & 0x3; -#else - vs0 = (au_readw(PB1100_BOARD_STATUS) >> 4) & 0x3; - inserted0 = !((au_readl(SYS_PINSTATERD) >> 9) & 0x1); /* gpio 9 */ -#endif - - state->ready = 0; - state->vs_Xv = 0; - state->vs_3v = 0; - state->detect = 0; - - if (sock == 0) { - if (inserted0) { - switch (vs0) { - case 0: - case 2: - state->vs_3v=1; - break; - case 3: /* 5V */ - break; - default: - /* return without setting 'detect' */ - printk(KERN_ERR "pb1x00 bad VS (%d)\n", - vs0); - return; - } - state->detect = 1; - } - } - else { - if (inserted1) { - switch (vs1) { - case 0: - case 2: - state->vs_3v=1; - break; - case 3: /* 5V */ - break; - default: - /* return without setting 'detect' */ - printk(KERN_ERR "pb1x00 bad VS (%d)\n", - vs1); - return; - } - state->detect = 1; - } - } - - if (state->detect) { - state->ready = 1; - } - - state->bvd1=1; - state->bvd2=1; - state->wrprot=0; - return 1; -} - - -static int pb1x00_pcmcia_get_irq_info(struct pcmcia_irq_info *info) -{ - - if(info->sock > PCMCIA_MAX_SOCK) return -1; - - /* - * Even in the case of the Pb1000, both sockets are connected - * to the same irq line. - */ - info->irq = PCMCIA_IRQ; - - return 0; -} - - -static int -pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure) -{ - u16 pcr; - - if(configure->sock > PCMCIA_MAX_SOCK) return -1; - -#ifdef CONFIG_MIPS_PB1000 - pcr = au_readl(PB1000_PCR); - - if (configure->sock == 0) { - pcr &= ~(PCR_SLOT_0_VCC0 | PCR_SLOT_0_VCC1 | - PCR_SLOT_0_VPP0 | PCR_SLOT_0_VPP1); - } - else { - pcr &= ~(PCR_SLOT_1_VCC0 | PCR_SLOT_1_VCC1 | - PCR_SLOT_1_VPP0 | PCR_SLOT_1_VPP1); - } - - pcr &= ~PCR_SLOT_0_RST; - debug("Vcc %dV Vpp %dV, pcr %x\n", - configure->vcc, configure->vpp, pcr); - switch(configure->vcc){ - case 0: /* Vcc 0 */ - switch(configure->vpp) { - case 0: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_GND, - configure->sock); - break; - case 12: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_12V, - configure->sock); - break; - case 50: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_5V, - configure->sock); - break; - case 33: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_3V, - configure->sock); - break; - default: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ, - configure->sock); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __FUNCTION__, - configure->vcc, - configure->vpp); - break; - } - break; - case 50: /* Vcc 5V */ - switch(configure->vpp) { - case 0: - pcr |= SET_VCC_VPP(VCC_5V,VPP_GND, - configure->sock); - break; - case 50: - pcr |= SET_VCC_VPP(VCC_5V,VPP_5V, - configure->sock); - break; - case 12: - pcr |= SET_VCC_VPP(VCC_5V,VPP_12V, - configure->sock); - break; - case 33: - pcr |= SET_VCC_VPP(VCC_5V,VPP_3V, - configure->sock); - break; - default: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ, - configure->sock); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __FUNCTION__, - configure->vcc, - configure->vpp); - break; - } - break; - case 33: /* Vcc 3.3V */ - switch(configure->vpp) { - case 0: - pcr |= SET_VCC_VPP(VCC_3V,VPP_GND, - configure->sock); - break; - case 50: - pcr |= SET_VCC_VPP(VCC_3V,VPP_5V, - configure->sock); - break; - case 12: - pcr |= SET_VCC_VPP(VCC_3V,VPP_12V, - configure->sock); - break; - case 33: - pcr |= SET_VCC_VPP(VCC_3V,VPP_3V, - configure->sock); - break; - default: - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ, - configure->sock); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __FUNCTION__, - configure->vcc, - configure->vpp); - break; - } - break; - default: /* what's this ? */ - pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,configure->sock); - printk(KERN_ERR "%s: bad Vcc %d\n", - __FUNCTION__, configure->vcc); - break; - } - - if (configure->sock == 0) { - pcr &= ~(PCR_SLOT_0_RST); - if (configure->reset) - pcr |= PCR_SLOT_0_RST; - } - else { - pcr &= ~(PCR_SLOT_1_RST); - if (configure->reset) - pcr |= PCR_SLOT_1_RST; - } - au_writel(pcr, PB1000_PCR); - au_sync_delay(300); - -#else - - pcr = au_readw(PB1100_MEM_PCMCIA) & ~0xf; - - debug("Vcc %dV Vpp %dV, pcr %x, reset %d\n", - configure->vcc, configure->vpp, pcr, configure->reset); - - - switch(configure->vcc){ - case 0: /* Vcc 0 */ - pcr |= SET_VCC_VPP(0,0); - break; - case 50: /* Vcc 5V */ - switch(configure->vpp) { - case 0: - pcr |= SET_VCC_VPP(2,0); - break; - case 50: - pcr |= SET_VCC_VPP(2,1); - break; - case 12: - pcr |= SET_VCC_VPP(2,2); - break; - case 33: - default: - pcr |= SET_VCC_VPP(0,0); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __FUNCTION__, - configure->vcc, - configure->vpp); - break; - } - break; - case 33: /* Vcc 3.3V */ - switch(configure->vpp) { - case 0: - pcr |= SET_VCC_VPP(1,0); - break; - case 12: - pcr |= SET_VCC_VPP(1,2); - break; - case 33: - pcr |= SET_VCC_VPP(1,1); - break; - case 50: - default: - pcr |= SET_VCC_VPP(0,0); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __FUNCTION__, - configure->vcc, - configure->vpp); - break; - } - break; - default: /* what's this ? */ - pcr |= SET_VCC_VPP(0,0); - printk(KERN_ERR "%s: bad Vcc %d\n", - __FUNCTION__, configure->vcc); - break; - } - - au_writew(pcr, PB1100_MEM_PCMCIA); - au_sync_delay(300); - - if (!configure->reset) { - pcr |= PB1100_PC_DRV_EN; - au_writew(pcr, PB1100_MEM_PCMCIA); - au_sync_delay(100); - pcr |= PB1100_PC_DEASSERT_RST; - au_writew(pcr, PB1100_MEM_PCMCIA); - au_sync_delay(100); - } - else { - pcr &= ~(PB1100_PC_DEASSERT_RST | PB1100_PC_DRV_EN); - au_writew(pcr, PB1100_MEM_PCMCIA); - au_sync_delay(100); - } -#endif - return 0; -} - -struct pcmcia_low_level pb1x00_pcmcia_ops = { - pb1x00_pcmcia_init, - pb1x00_pcmcia_shutdown, - pb1x00_pcmcia_socket_state, - pb1x00_pcmcia_get_irq_info, - pb1x00_pcmcia_configure_socket -}; _ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |