Messages in this thread | | | From | Gene Heskett <> | Subject | adding new device to pci bus | Date | Thu, 4 Nov 2004 00:10:59 -0500 |
| |
Greetings;
Some smallish non-progress on my CNC project. I added the vendor/product description (00ff:0800) to drivers/pci/pci.ids and recompiled.
The data does make it into the self generated devlist.h file during the compile, but that appears to be as far as it gets. On the reboot there is still no recognition of the cards presence in the logs, and the data I can extract from the /proc filesystem about the card is as limited as before. It shows up on the pci bus as 00:10.0 and thats it.
This was using 2.6.10-rc1-bk10 as the test kernel, and on that old slow box, a 233mhz PII with 384 megs of ram, a kernel compile is a bit over 65 minutes!
I didn't ever expect that one change to be the magic twanger, but shouldn't I at least have seen something?
Whats the next step here since it appears I'm taking 1/64" steps?
-- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) 99.28% setiathome rank, not too shabby for a WV hillbilly Yahoo.com attorneys please note, additions to this message by Gene Heskett are: Copyright 2004 by Maurice Eugene Heskett, all rights reserved. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |