Messages in this thread | | | Date | Fri, 26 Nov 2004 17:06:08 +0300 | From | "Igor A. Valcov" <> | Subject | 2.6.9-ac11 kernel crash with nvidia 6629 |
| |
Hi all!
I have kernel crash with nvidia kernel module. Xorg-6.8.1.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 12 (level, low) -> IRQ 12 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6629 Wed Nov 3 13:12:51 PST 2004 [<c0133036>] bad_page+0x73/0x9f [<c0133368>] prep_new_page+0x26/0x3f [<c013387f>] buffered_rmqueue+0xea/0x1a0 [<c0133c2e>] __alloc_pages+0x2f9/0x31a [<c013d768>] do_anonymous_page+0x74/0x1ae [<c013d903>] do_no_page+0x61/0x378 [<c013ddeb>] handle_mm_fault+0xbe/0x15c [<c01136d5>] do_page_fault+0x322/0x51e [<c021cb3d>] i8042_timer_func+0x0/0xb [<c011fa8d>] run_timer_softirq+0xcb/0x18a [<c011fc23>] do_timer+0xcd/0xd2 [<c011c263>] __do_softirq+0x77/0x80 [<c0106032>] do_IRQ+0x101/0x136 [<c01133b3>] do_page_fault+0x0/0x51e [<c0104101>] error_code+0x2d/0x38 ------------[ cut here ]------------ PREEMPT Modules linked in: nvidia vmnet vmmon CPU: 0 EIP: 0060:[<c014204d>] Tainted: P VLI EFLAGS: 00013286 (2.6.9-ac11) EIP is at page_remove_rmap+0x29/0x3d eax: ffffffff ebx: 000da000 ecx: c16a8c20 edx: c16a8c20 esi: ffff5910 edi: 00100000 ebp: c16a8c20 esp: f76bfea8 ds: 007b es: 007b ss: 0068 Process X (pid: 7056, threadinfo=f76be000 task=f768c560) Stack: c013c0e6 f76bfeb8 0000f0f0 03919700 00000000 35461067 00000000 0896a000 c0421f40 08d6a000 f76b508c 08a6a000 c0421f40 c013c229 00100000 00000000 f765b300 f7ed1d78 0896a000 f76b508c 08a6a000 c0421f40 c013c282 00100000 Call Trace: [<c013c0e6>] zap_pte_range+0x14d/0x251 [<c013c229>] zap_pmd_range+0x3f/0x5b [<c013c282>] unmap_page_range+0x3d/0x63 [<c013c39e>] unmap_vmas+0xf6/0x1b4 [<c013ff1c>] unmap_region+0x72/0xd6 [<c01401a2>] do_munmap+0x101/0x147 [<c013e9b2>] sys_brk+0xe4/0xe8 [<c0103e85>] sysenter_past_esp+0x52/0x71 Code: eb c5 89 c2 8b 00 f6 c4 08 75 2a 83 42 08 ff 0f 98 c0 84 c0 74 14 8b 42 08 83 c0 01 78 0d 9c 58 fa 83 2d d0 9d 42 c0 01 50 9d c3 <0f> 0b da 01 30 74 32 c0 eb e9 0f 0b d7 01 30 74 32 c0 eb cc 55 <6>note: X[7056] exited with preempt_count 2 [<c03127f5>] schedule+0x4c1/0x4c6 [<c0217000>] vt_console_print+0x0/0x2da [<c011827e>] __call_console_drivers+0x44/0x46 [<c0118360>] call_console_drivers+0x76/0xfb [<c0312d80>] rwsem_down_read_failed+0x8f/0x176 [<c011b56b>] .text.lock.exit+0x6b/0xc8 [<c01048a5>] do_divide_error+0x0/0x10e [<c0104bcf>] do_invalid_op+0x0/0xed [<c0127499>] search_exception_tables+0x21/0x23 [<c0104bcf>] do_invalid_op+0x0/0xed [<c0104cba>] do_invalid_op+0xeb/0xed [<f8d7229c>] rm_enable_interrupts+0x44/0x58 [nvidia] [<c014204d>] page_remove_rmap+0x29/0x3d [<f8f566a9>] os_release_sema+0x13/0x78 [nvidia] [<f8d6c4ee>] _nv001726rm+0x12/0x18 [nvidia] [<c0104101>] error_code+0x2d/0x38 [<c014204d>] page_remove_rmap+0x29/0x3d [<c013c0e6>] zap_pte_range+0x14d/0x251 [<c013c229>] zap_pmd_range+0x3f/0x5b [<c013c282>] unmap_page_range+0x3d/0x63 [<c013c39e>] unmap_vmas+0xf6/0x1b4 [<c013ff1c>] unmap_region+0x72/0xd6 [<c01401a2>] do_munmap+0x101/0x147 [<c013e9b2>] sys_brk+0xe4/0xe8 [<c0103e85>] sysenter_past_esp+0x52/0x71 [<c0133036>] bad_page+0x73/0x9f [<c0133368>] prep_new_page+0x26/0x3f [<c013387f>] buffered_rmqueue+0xea/0x1a0 [<c0133c2e>] __alloc_pages+0x2f9/0x31a [<c022722c>] get_device+0xe/0x14 [<c013d768>] do_anonymous_page+0x74/0x1ae [<c013d903>] do_no_page+0x61/0x378 [<c013ddeb>] handle_mm_fault+0xbe/0x15c [<c01136d5>] do_page_fault+0x322/0x51e [<c028f175>] uhci_irq+0x1a5/0x1ca [<c0105ae8>] handle_IRQ_event+0x25/0x51 [<c0105fe7>] do_IRQ+0xb6/0x136 [<c01133b3>] do_page_fault+0x0/0x51e [<c0104101>] error_code+0x2d/0x38
=================================================================
My dmesg:
Linux version 2.6.9-ac11 (root@alpha-viaprog) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #1 Wed Nov 24 22:43:43 MSK 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f4880 On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 32752 pages, LIFO batch:7 DMI 2.3 present. ACPI: RSDP (v000 GBT ) @ 0x000f6360 ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff6740 ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Built 1 zonelists Kernel command line: root=/dev/hda2 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2391.881 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1035452k/1048512k available (2128k kernel code, 12476k reserved, 904k data, 140k init, 131008k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 4734.97 BogoMIPS (lpj=2367488) Security Scaffold v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Level Trigger. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb1e0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 12 (level, low) -> IRQ 12 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 12 (level, low) -> IRQ 12 ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9 ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 11 ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 11 (level, low) -> IRQ 11 Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com> highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU0] (supports C1, 2 throttling states) lp: driver loaded but no devices found Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 9 (level, low) -> IRQ 9 ttyS4 at I/O 0x9400 (irq = 9) is a 16550A parport0: PC-style at 0x378 [PCSPP(,...)] lp0: using parport0 (polling). Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) nbd: registered device at major 43 PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 10 (level, low) -> IRQ 10 eth0: RealTek RTL8139 at 0xf8802000, 00:05:1c:18:5f:50, IRQ 10 eth0: Identified 8139 chip type 'RTL-8100B/8139D' Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 10 (level, low) -> IRQ 10 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: ST3120026A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive hdd: ST3120026A, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 PDC20269: IDE controller at PCI slot 0000:02:02.0 ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 11 (level, low) -> IRQ 11 PDC20269: chipset revision 2 PDC20269: 100% native mode on irq 11 ide2: BM-DMA at 0xa800-0xa807, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xa808-0xa80f, BIOS settings: hdg:pio, hdh:pio Probing IDE interface ide2... hde: ST3200822A, ATA DISK drive ide2 at 0x9800-0x9807,0x9c02 on irq 11 Probing IDE interface ide3... hdg: ST340810A, ATA DISK drive ide3 at 0xa000-0xa007,0xa402 on irq 11 Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 1024KiB hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 hdd: max request size: 1024KiB hdd: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hdd: cache flushes supported /dev/ide/host0/bus1/target1/lun0: p1 p2 p3 p4 hde: max request size: 1024KiB hde: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100) hde: cache flushes supported /dev/ide/host2/bus0/target0/lun0: p1 p2 hdg: max request size: 128KiB hdg: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hdg: cache flushes not supported /dev/ide/host2/bus1/target0/lun0: p1 hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.02 loaded. ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 11, pci mem f880e000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 12 (level, low) -> IRQ 12 uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 12, io base 0000b800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 10, io base 0000b000 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 10, io base 0000b400 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 usb 4-2: new low speed USB device using address 2 input: PC Speaker Intel 810 + AC97 Audio, version 1.01, 22:41:11 Nov 24 2004 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.5 to 64 i810: Intel ICH4 found at IO 0xd800 and 0xd400, MEM 0xec002000 and 0xec003000, IRQ 5 i810: Intel ICH4 mmio at 0xf8810000 and 0xf8812000 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2 i810_audio: Primary codec has ID 0 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 0 ac97_codec: AC97 Audio codec, id: ALG32 (ALC650) i810_audio: AC'97 codec 0 supports AMAP, total channels = 6 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) ip_conntrack version 2.1 (8191 buckets, 65528 max) - 300 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 ACPI: (supports S0 S3 S4 S5) ACPI wakeup devices: SLPB PCI0 HUB0 USB0 USB1 USB2 USB3 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. EXT3-fs: recovery complete. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 140k freed Adding 1028152k swap on /dev/hda1. Priority:43 extents:1 Adding 1004020k swap on /dev/hde1. Priority:43 extents:1 EXT3 FS on hda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdg1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hde2, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: link down vmmon: module license 'unspecified' taints kernel. /dev/vmmon: Module vmmon: registered with major=10 minor=165 /dev/vmmon: Module vmmon: initialized /dev/vmnet: open called by PID 6400 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: enabling the bridge bridge-eth0: up bridge-eth0: already up bridge-eth0: attached process `named' is using obsolete setsockopt SO_BSDCOMPAT ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 12 (level, low) -> IRQ 12 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6629 Wed Nov 3 13:12:51 PST 2004
-- Igor A. Valcov
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |