Messages in this thread | | | Date | Mon, 22 Nov 2004 22:21:14 +0300 | From | Stas Sergeev <> | Subject | ACPI bug causes cd-rom lock-ups (2.6.10-rc2) |
| |
Hello.
Starting with 2.6.10-rc1-mm4 (or 3), and now the plain -rc2 has the bug that causes any process, that is trying to access my cd-rom, to lock up. Jens Axboe suggested it is an ACPI bug, and indeed, specifying "pci=noacpi" makes the problem to go away. Attached are the dmesg outputs from the functional -rc1 kernel, broken -rc1-mm4 (note the "lost interrupt" message at the end), the -rc1-mm4 with "pci=noacpi" log, lspci -v, and the Alt-PrtSc-t trace of the locked-up process. Let me know if something else is needed to track this down.
Linux version 2.6.10-rc1 (root@stas) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 SMP Thu Nov 4 09:39:47 MSK 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 IntelR ) @ 0x000f75d0 ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Built 1 zonelists Kernel command line: ro root=/dev/hda12 lapic nmi_watchdog=1 debug apic=debug Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! mapped APIC to ffffd000 (fee00000) Initializing CPU#0 CPU 0 irqstacks, hard=c040d000 soft=c040b000 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1133.740 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 515152k/524224k available (2061k kernel code, 8472k reserved, 830k data, 200k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2244.60 BogoMIPS (lpj=1122304) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Level Trigger. CPU0: Intel(R) Pentium(R) III CPU 1133MHz stepping 01 per-CPU timeslice cutoff: 731.79 usecs. task migration cache decay timeout: 1 msecs. SMP motherboard not detected. Getting VERSION: 40011 Getting VERSION: 40011 Getting ID: 0 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 testing NMI watchdog ... OK. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1133.0175 MHz. ..... host bus clock speed is 133.0314 MHz. Brought up 1 CPUs CPU0: domain 0: span 1 groups: 1 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfafc0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fb9a0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb9d0, dseg 0xf0000 PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver SCSI subsystem initialized PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:00.1[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 5 (level, low) -> IRQ 5 Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1100624518.455:0): initialized Total HugeTLB memory allocated, 0 Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states) ACPI: Thermal Zone [THRM] (34 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found lp: driver loaded but no devices found Real Time Clock Driver v1.12 Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds). serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11 ttyS4: detected caps 00000700 should be 00000100 ttyS4 at I/O 0xa000 (irq = 11) is a 16C950/954 ttyS5: detected caps 00000700 should be 00000100 ttyS5 at I/O 0xa400 (irq = 11) is a 16C950/954 ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] lp0: using parport0 (interrupt-driven). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered elevator: using anticipatory as default io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) nbd: registered device at major 43 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 17 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: MAXTOR 6L040J2, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 > hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.02 loaded. mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 16384 bind 21845) ip_conntrack version 2.1 (4095 buckets, 32760 max) - 308 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) ACPI wakeup devices: SLPB PCI0 HUB0 USB0 USB1 UAR1 UAR2 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 200k freed kjournald starting. Commit interval 5 seconds usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1f.2: Intel Corp. 82801BA/BAM USB (Hub #1) PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: irq 11, io base 0xd000 uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1f.4: Intel Corp. 82801BA/BAM USB (Hub #2) PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: irq 11, io base 0xd400 uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-1: new full speed USB device using address 2 Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning EXT3 FS on hda12, internal journal Adding 530104k swap on /dev/hda5. Priority:-1 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda14, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda11, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda13, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! NTFS driver 2.1.21 [Flags: R/W MODULE]. NTFS volume version 3.1. NTFS-fs error (device hda2): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows. Vendor: JetFlash Model: TS256MJF2A Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 usb-storage: device scan complete ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:02:04.0: 3Com PCI 3c905C Tornado at 0xc000. Vers LK1.1.19 SCSI device sda: 512000 512-byte hdwr sectors (262 MB) sda: Write Protect is off sda: Mode Sense: 0b 00 00 08 sda: assuming drive cache: write through sda: sda1 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 NET: Registered protocol family 10 Disabled Privacy Extensions on device c039c000(lo) IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present Linux version 2.6.10-rc1-mm4 (root@stas) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #2 SMP Thu Nov 11 09:47:59 MSK 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 IntelR ) @ 0x000f75d0 ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Built 1 zonelists Initializing CPU#0 Kernel command line: ro root=/dev/hda12 lapic nmi_watchdog=2 CPU 0 irqstacks, hard=c0433000 soft=c0431000 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1133.748 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 515124k/524224k available (2176k kernel code, 8616k reserved, 858k data, 208k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2244.60 BogoMIPS (lpj=1122304) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Level Trigger. CPU0: Intel(R) Pentium(R) III CPU 1133MHz stepping 01 per-CPU timeslice cutoff: 731.79 usecs. task migration cache decay timeout: 1 msecs. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs CPU0: domain 0: span 1 groups: 1 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfafc0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20041105 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PnPBIOS: Disabled by ACPI PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. fscache: general fs caching registered CacheFS: general fs caching v0.1 registered Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1101144905.981:0): initialized Total HugeTLB memory allocated, 0 Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1 C2) ACPI: Processor [CPU0] (supports 2 throttling states) ACPI: Thermal Zone [THRM] (30 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found lp: driver loaded but no devices found Real Time Clock Driver v1.12 [drm] Initialized drm 1.0.0 20040925 Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds). ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1 ACPI: PS/2 Mouse Controller [PS2M] at irq 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11 ttyS4: detected caps 00000700 should be 00000100 ttyS4 at I/O 0xa000 (irq = 11) is a 16C950/954 ttyS5: detected caps 00000700 should be 00000100 ttyS5 at I/O 0xa400 (irq = 11) is a 16C950/954 ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] lp0: using parport0 (interrupt-driven). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered ACPI: Floppy Controller [FDC0] at I/O 0x3f0-0x3f5, 0x3f7 irq 6 dma channel 2 elevator: using anticipatory as default io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) nbd: registered device at major 43 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 17 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: MAXTOR 6L040J2, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 > hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 Please email the following PERFCTR INIT lines to mikpe@csd.uu.se To remove this message, rebuild the driver with CONFIG_PERFCTR_INIT_TESTS=n PERFCTR INIT: vendor 0, family 6, model 11, stepping 1, clock 1133748 kHz PERFCTR INIT: NITER == 64 PERFCTR INIT: loop overhead is 222 cycles PERFCTR INIT: rdtsc cost is 36.3 cycles (2546 total) PERFCTR INIT: rdpmc cost is 35.3 cycles (2482 total) PERFCTR INIT: rdmsr (counter) cost is 90.4 cycles (6008 total) PERFCTR INIT: rdmsr (evntsel) cost is 71.9 cycles (4825 total) PERFCTR INIT: wrmsr (counter) cost is 100.7 cycles (6669 total) PERFCTR INIT: wrmsr (evntsel) cost is 96.0 cycles (6366 total) PERFCTR INIT: read cr4 cost is 1.9 cycles (346 total) PERFCTR INIT: write cr4 cost is 42.2 cycles (2928 total) PERFCTR INIT: sync_core cost is 133.2 cycles (8749 total) perfctr: driver 2.7.6, cpu type Intel P6 at 1133748 kHz NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 16384 bind 16384) ip_conntrack version 2.1 (4095 buckets, 32760 max) - 312 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) ACPI wakeup devices: SLPB PCI0 HUB0 USB0 USB1 UAR1 UAR2 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found CacheFS: Wrong magic number on cache EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 208k freed kjournald starting. Commit interval 5 seconds ibm_acpi: ec object not found thinkpad_acpi: ACPI IBM Thinkpad Fn+Fx key driver version 1.1 usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1f.2: Intel Corp. 82801BA/BAM USB (Hub #1) PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: irq 11, io base 0xd000 uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 15 PCI: setting IRQ 15 as level-triggered ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 15 (level, low) -> IRQ 15 uhci_hcd 0000:00:1f.4: Intel Corp. 82801BA/BAM USB (Hub #2) PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: irq 15, io base 0xd400 uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 usb 1-1: new full speed USB device using uhci_hcd and address 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected SCSI subsystem initialized Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning EXT3 FS on hda12, internal journal Adding 530104k swap on /dev/hda5. Priority:-1 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda14, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda11, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda13, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! NTFS driver 2.1.22-WIP [Flags: R/W MODULE]. NTFS volume version 3.1. Vendor: JetFlash Model: TS256MJF2A Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 usb-storage: device scan complete SCSI device sda: 512000 512-byte hdwr sectors (262 MB) sda: Write Protect is off sda: Mode Sense: 0b 00 00 08 sda: assuming drive cache: write through sda: sda1 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:02:04.0: 3Com PCI 3c905C Tornado at 0xc000. Vers LK1.1.19 ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 10 Disabled Privacy Extensions on device c03bbfc0(lo) IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present hdc: lost interrupt Linux version 2.6.10-rc1-mm4 (root@stas) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #2 SMP Thu Nov 11 09:47:59 MSK 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 IntelR ) @ 0x000f75d0 ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 Built 1 zonelists Initializing CPU#0 Kernel command line: ro root=/dev/hda12 lapic nmi_watchdog=2 pci=noacpi CPU 0 irqstacks, hard=c0433000 soft=c0431000 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1133.748 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 515124k/524224k available (2176k kernel code, 8616k reserved, 858k data, 208k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2244.60 BogoMIPS (lpj=1122304) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Level Trigger. CPU0: Intel(R) Pentium(R) III CPU 1133MHz stepping 01 per-CPU timeslice cutoff: 731.79 usecs. task migration cache decay timeout: 1 msecs. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs CPU0: domain 0: span 1 groups: 1 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfafc0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20041105 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PnPBIOS: Disabled by ACPI PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0 PCI: IRQ 0 for device 0000:00:1f.3 doesn't match PIRQ mask - try pci=usepirqmask fscache: general fs caching registered CacheFS: general fs caching v0.1 registered Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1101145133.749:0): initialized Total HugeTLB memory allocated, 0 Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1 C2) ACPI: Processor [CPU0] (supports 2 throttling states) ACPI: Thermal Zone [THRM] (30 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found lp: driver loaded but no devices found Real Time Clock Driver v1.12 [drm] Initialized drm 1.0.0 20040925 Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds). ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1 ACPI: PS/2 Mouse Controller [PS2M] at irq 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A PCI: Found IRQ 11 for device 0000:02:00.0 PCI: Sharing IRQ 11 with 0000:02:00.1 PCI: Sharing IRQ 11 with 0000:02:04.0 ttyS4: detected caps 00000700 should be 00000100 ttyS4 at I/O 0xa000 (irq = 11) is a 16C950/954 ttyS5: detected caps 00000700 should be 00000100 ttyS5 at I/O 0xa400 (irq = 11) is a 16C950/954 ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] lp0: using parport0 (interrupt-driven). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered ACPI: Floppy Controller [FDC0] at I/O 0x3f0-0x3f5, 0x3f7 irq 6 dma channel 2 elevator: using anticipatory as default io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) nbd: registered device at major 43 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 17 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: MAXTOR 6L040J2, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 > hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 Please email the following PERFCTR INIT lines to mikpe@csd.uu.se To remove this message, rebuild the driver with CONFIG_PERFCTR_INIT_TESTS=n PERFCTR INIT: vendor 0, family 6, model 11, stepping 1, clock 1133748 kHz PERFCTR INIT: NITER == 64 PERFCTR INIT: loop overhead is 222 cycles PERFCTR INIT: rdtsc cost is 34.9 cycles (2461 total) PERFCTR INIT: rdpmc cost is 35.5 cycles (2499 total) PERFCTR INIT: rdmsr (counter) cost is 90.4 cycles (6008 total) PERFCTR INIT: rdmsr (evntsel) cost is 71.9 cycles (4825 total) PERFCTR INIT: wrmsr (counter) cost is 100.7 cycles (6669 total) PERFCTR INIT: wrmsr (evntsel) cost is 96.0 cycles (6366 total) PERFCTR INIT: read cr4 cost is 1.9 cycles (346 total) PERFCTR INIT: write cr4 cost is 42.2 cycles (2928 total) PERFCTR INIT: sync_core cost is 132.3 cycles (8692 total) perfctr: driver 2.7.6, cpu type Intel P6 at 1133748 kHz NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 16384 bind 16384) ip_conntrack version 2.1 (4095 buckets, 32760 max) - 312 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) ACPI wakeup devices: SLPB PCI0 HUB0 USB0 USB1 UAR1 UAR2 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found CacheFS: Wrong magic number on cache EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 208k freed kjournald starting. Commit interval 5 seconds ibm_acpi: ec object not found thinkpad_acpi: ACPI IBM Thinkpad Fn+Fx key driver version 1.1 usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 PCI: Found IRQ 11 for device 0000:00:1f.2 uhci_hcd 0000:00:1f.2: Intel Corp. 82801BA/BAM USB (Hub #1) PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: irq 11, io base 0xd000 uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Found IRQ 9 for device 0000:00:1f.4 uhci_hcd 0000:00:1f.4: Intel Corp. 82801BA/BAM USB (Hub #2) PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: irq 9, io base 0xd400 uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-1: new full speed USB device using uhci_hcd and address 2 SCSI subsystem initialized Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning EXT3 FS on hda12, internal journal Adding 530104k swap on /dev/hda5. Priority:-1 extents:1 Vendor: JetFlash Model: TS256MJF2A Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 usb-storage: device scan complete SCSI device sda: 512000 512-byte hdwr sectors (262 MB) sda: Write Protect is off sda: Mode Sense: 0b 00 00 08 sda: assuming drive cache: write through sda: sda1 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda14, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda11, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda13, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! NTFS driver 2.1.22-WIP [Flags: R/W MODULE]. NTFS volume version 3.1. PCI: Found IRQ 11 for device 0000:02:04.0 PCI: Sharing IRQ 11 with 0000:02:00.0 PCI: Sharing IRQ 11 with 0000:02:00.1 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:02:04.0: 3Com PCI 3c905C Tornado at 0xc000. Vers LK1.1.19 PCI: Found IRQ 11 for device 0000:02:04.0 PCI: Sharing IRQ 11 with 0000:02:00.0 PCI: Sharing IRQ 11 with 0000:02:00.1 NET: Registered protocol family 10 Disabled Privacy Extensions on device c03bbfc0(lo) IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present 00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04) Subsystem: Intel Corp.: Unknown device 0000 Flags: bus master, fast devsel, latency 0 Memory at d0000000 (32-bit, prefetchable) Capabilities: [88] #09 [e104] Capabilities: [a0] AGP version 2.0
00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, fast devsel, latency 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 Memory behind bridge: d6000000-d8ffffff Prefetchable memory behind bridge: d4000000-d5ffffff
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev 11) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000a000-0000cfff Memory behind bridge: b0000000-cfffffff
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 11) Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 11) (prog-if 80 [Master]) Subsystem: Intel Corp.: Unknown device 2442 Flags: bus master, medium devsel, latency 0 I/O ports at f000 [size=16]
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 11) (prog-if 00 [UHCI]) Subsystem: Intel Corp. 82801BA/BAM USB (Hub #1) Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at d000 [size=32]
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 11) Subsystem: Intel Corp.: Unknown device 2442 Flags: medium devsel, IRQ 10 I/O ports at 5000 [size=16]
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 11) (prog-if 00 [UHCI]) Subsystem: Intel Corp.: Unknown device 2442 Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at d400 [size=32]
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (rev 01) (prog-if 00 [VGA]) Subsystem: Matrox Graphics, Inc. Millennium G550 Dual Head DDR 32Mb Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at d4000000 (32-bit, prefetchable) Memory at d6000000 (32-bit, non-prefetchable) [size=16K] Memory at d7000000 (32-bit, non-prefetchable) [size=8M] Capabilities: [dc] Power Management version 2 Capabilities: [f0] AGP version 2.0
02:00.0 Serial controller: Oxford Semiconductor Ltd OX16PCI952 (Dual 16950 UART) (prog-if 06 [16950]) Subsystem: Oxford Semiconductor Ltd: Unknown device 0001 Flags: medium devsel, IRQ 11 I/O ports at a000 I/O ports at a400 [size=8] I/O ports at a800 [size=32] Memory at c0012000 (32-bit, non-prefetchable) [size=4K] Memory at c0013000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 1
02:00.1 Parallel controller: Oxford Semiconductor Ltd: Unknown device 9523 (prog-if 01 [BiDir]) Subsystem: Oxford Semiconductor Ltd: Unknown device 0001 Flags: medium devsel, IRQ 11 I/O ports at ac00 I/O ports at b000 [size=4] I/O ports at b400 [size=32] Memory at c0010000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 1
02:02.0 Bridge: PLX Technology, Inc. PCI <-> IOBus Bridge (rev 01) Subsystem: Unknown device 3631:4c37 Flags: medium devsel, IRQ 10 Memory at c0011000 (32-bit, non-prefetchable) I/O ports at b800 [size=128] I/O ports at bc00 [size=16] Memory at c0000000 (32-bit, non-prefetchable) [size=64K]
02:04.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 30) Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC Flags: bus master, medium devsel, latency 32, IRQ 11 I/O ports at c000 Memory at c0014000 (32-bit, non-prefetchable) [size=128] Capabilities: [dc] Power Management version 2
02:09.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at c400 Capabilities: [c0] Power Management version 2
Nov 15 14:21:38 stas kernel: eject D C046C148 2500 3426 3363 (NOTLB) Nov 15 14:21:38 stas kernel: db4c8cc4 00000086 c046c0b8 c046c148 db4c8dd0 db4c8ca4 c0290e9c c0290c90 Nov 15 14:21:38 stas kernel: 00001388 dfce797c c046c0b8 df778028 c046c148 00000000 db4c8cb4 c1405f60 Nov 15 14:21:38 stas kernel: 00068a1b 5a045780 000f420a df9a3c10 db4c8d48 db4c8d44 db4c8000 db4c8d18 Nov 15 14:21:38 stas kernel: Call Trace: Nov 15 14:21:38 stas kernel: [<c031cee4>] wait_for_completion+0x94/0x100 Nov 15 14:21:38 stas kernel: [<c0285698>] ide_do_drive_cmd+0x118/0x150 Nov 15 14:21:38 stas kernel: [<c0291b44>] cdrom_queue_packet_command+0x44/0xb0 Nov 15 14:21:38 stas kernel: [<c02926a4>] cdrom_check_status+0x74/0x90 Nov 15 14:21:39 stas kernel: [<c029359d>] ide_cdrom_check_media_change_real+0x1d/0x40 Nov 15 14:21:39 stas kernel: [<c029616a>] media_changed+0x5a/0x90 Nov 15 14:21:39 stas kernel: [<c016a902>] check_disk_change+0x32/0x80 Nov 15 14:21:39 stas kernel: [<c02956db>] cdrom_open+0x6b/0x100 Nov 15 14:21:39 stas kernel: [<c02944fd>] idecd_open+0x5d/0x80 Nov 15 14:21:39 stas kernel: [<c016aad8>] do_open+0xe8/0x370 Nov 15 14:21:39 stas kernel: [<c016ae18>] blkdev_open+0x28/0x60 Nov 15 14:21:39 stas kernel: [<c0161a66>] dentry_open+0x156/0x280 Nov 15 14:21:39 stas kernel: [<c016190d>] filp_open+0x4d/0x50 Nov 15 14:21:39 stas kernel: [<c0161d4c>] sys_open+0x3c/0xa0 Nov 15 14:21:39 stas kernel: [<c0105175>] sysenter_past_esp+0x52/0x71
| |