Messages in this thread | | | Subject | RE: e820 and shared VGA memory problem | Date | Thu, 18 Nov 2004 13:55:25 -0800 | From | "Pallipadi, Venkatesh" <> |
| |
>-----Original Message----- >From: linux-kernel-owner@vger.kernel.org >[mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of Magnus Damm >Sent: Thursday, November 18, 2004 1:21 PM >To: linux-kernel@vger.kernel.org >Subject: e820 and shared VGA memory problem > >Heya, > >The machine is a Uniwill 223II0 equipped with 2GiB RAM and BIOS >1.03US. The graphics are 855GM, aka "Intel Extreme Graphics 2", ie a >chunk of system RAM is used as graphics memory. The BIOS does not >allow me to setup the amount of VGA RAM. > >I am running a vanilla 2.6.9-kernel configured with highmem enabled. > >The problem is that the machine is slow as hell if the kernel is >booted without limiting the amount of system ram with the command line >option "ram=xM". And by that I mean that executing user space programs >is _extremely_ slow - I've never taken the time to go through the >rc-scripts. >
What does your mtrr settings say? Can you get output of /proc/mtrr for both case: System running fine with "mem=" and system being slow when there is no "mem=".
I have seen similar problems on different hardware. And the issue was due to the fact that BIOS mtrr setting and BIOS E820 doesn't agree with each other regarding the usable memory. BIOS says some part of memory as usable in E820 and sets mtrr as uncacheable to the same memory range.
-Venki - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |