lkml.org 
[lkml]   [2004]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRE: NForce3 SATA badness with remove/add devices
Date
From
> its my 3 attemp (LKML Post 0410.2/0129l) to get a answer to 
> following thing. First of all I'm using a NForce 3 250GB (MSI
> K8N Neo2 Platinum) With 3 SATA disks Maxtor 6B200M/NCQ
> 2xSamsung SP1213C
>
> My Problem is when the kernel starts with libsata and sata_nv
> compiled in when I boot the System with libsata and sata_nv
> it removes the first disk (Maxtor 6B200B) then a abnormal
> timeout occur while adding the device: this message appears
> error is "ATA: abnormal status 0x0D on port 0x9E7" and "ata
> is to slow to answer" now the corious thing on that is if I
> wait 40 or 50 sec maybe it work or maybe not.. when I'm using
> the old "CONFIG_BLK_DEV_IDE_SATA:" everything works great
> here. I dont know whats wrong but i tested it on 5 Motherboard
> there the Maxtor working without hicks (VIA
> KT880Pro,i875P,i925,SIS755,Promise 378 SATA TX2, but when I
> plug it on a NForce 3 250GB (MSI K8N Neo2 or Gigabyte K8NSNXP
> or even new MSI K8N Neo2)
> the same timeout occur..the Maxtor 6B200M is SATA2 but full
> SATA compatible.
> I thought it is because of hotplug support but disabling all
> this stuff did not work. I hope someone know why this happen
> and how to fix this.

Can you try the workaround suggested in
http://bugme.osdl.org/show_bug.cgi?id=3352?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:07    [W:0.030 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site