lkml.org 
[lkml]   [2004]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 2.4] Fix bus reset in i2c-philips-par
Hi Marcelo,

This patch fixes the bus reset in i2c-philips-par when it is loaded with
type!=0. For now, the reset is always made as if type==0. This patch was
built and tested on 2.4.25-pre7.

I've committed a similar fix to our i2c CVS repository, and have sent
a patch to Greg KH for 2.6 too, which he already accepted.

This is a bug fix, however:
* I think that the i2c-philips-par driver isn't much used.
* I think that the i2c-philips-par driver with type!=0 is even less
used.
* The bus reset is more or less optional. Skipping it doesn't hurt much.
* The wrong reset doesn't hurt either.
So this is in no way critical (and explains why the bug wasn't
discovered earlier).

On the other hand the fix is easy and clear. Anyway I leave it to you to
decide if it should be applied to 2.4 or not.

Thanks.

--- linux-2.4.25-pre7/drivers/i2c/i2c-philips-par.c.orig Sun Jan 25 09:57:06 2004
+++ linux-2.4.25-pre7/drivers/i2c/i2c-philips-par.c Sun Jan 25 09:59:36 2004
@@ -212,8 +212,8 @@

/* reset hardware to sane state */
parport_claim_or_block(adapter->pdev);
- bit_lp_setsda(port, 1);
- bit_lp_setscl(port, 1);
+ adapter->bit_lp_data.setsda(port, 1);
+ adapter->bit_lp_data.setscl(port, 1);
parport_release(adapter->pdev);

if (i2c_bit_add_bus(&adapter->adapter) < 0)
--
Jean Delvare
http://www.ensicaen.ismra.fr/~delvare/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:00    [W:0.022 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site