Messages in this thread | | | Date | Sun, 21 Sep 2003 22:28:39 +0200 | From | JSTHEMASTER <> | Subject | [BUG] 2.4.22 ACPI hangs up NFORCE2 system when using kudzu |
| |
[1.] When using Kernel 2.4.22 (<= 2.4.21 works perfectly) ACPI on a system with NFORCE2 chipset the system hangs when starting kudzu without any output or log-entry!
[2.] If you enable kernel 2.4.22 ACPI on a system running NFORCE2 chipset (I got a MSI K7N2 Delta-L mainboard) the system hangs when using kudzu (Redhat Hardware detection tool, any version) without any output or log entry. I'm sorry, I was unable to monitor any crash dump information because the whole system hung up and didn't write any data. Kernels 2.4.21 or lower work fine.
[3.] acpi, kudzu, nforce2, k72n delta-l, hwacpi, kernel 2.4.22
[4.] Linux version 2.4.22 (root@mrsuicide) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Fre Aug 8 02:24:50 CEST 2003
[5.] No message or log entry.
[6.] Get a NFORCE2 board and try kernel 2.4.22 with acpi.
[7.] [7.1.] Gnu C 3.2.2 Gnu make 3.79.1 util-linux 2.11y mount 2.11y modutils 2.4.22 e2fsprogs 1.32 jfsutils 1.0.17 reiserfsprogs 3.6.4 pcmcia-cs 3.1.31 quota-tools 3.06. PPP 2.4.1 isdn4k-utils 3.1pre4 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 2.0.11 Net-tools 1.60 Kbd 1.08 Sh-utils 4.5.3 Modules Loaded nvaudio nvidia i2c-nforce2 w83781d i2c-isa i2c-dev i2c-proc i2c-core ipt_state ipt_MASQUERADE iptable_nat ip_conntrack parport_pc lp parport iptable_filter ip_tables ppp_synctty ppp_async ppp_generic slhc nvnet nls_iso8859-1 nls_cp437 keybdev mousedev hid input rtc
[7.2.] processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 8 model name : AMD Athlon(tm) XP 2600+ stepping : 1 cpu MHz : 2079.544 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow bogomips : 4141.87
[7.3.] nvaudio 39668 0 (autoclean) nvidia 1764672 11 (autoclean) i2c-nforce2 4040 0 (unused) w83781d 24592 0 (unused) i2c-isa 1292 0 (unused) i2c-dev 4960 0 (unused) i2c-proc 8052 0 [w83781d] i2c-core 19556 0 [i2c-nforce2 w83781d i2c-isa i2c-dev i2c-proc] ipt_state 1048 12 (autoclean) ipt_MASQUERADE 2200 1 (autoclean) iptable_nat 20824 1 (autoclean) [ipt_MASQUERADE] ip_conntrack 26824 2 (autoclean) [ipt_state ipt_MASQUERADE iptable_nat] parport_pc 18756 1 (autoclean) lp 8772 0 (autoclean) parport 35968 1 (autoclean) [parport_pc lp] iptable_filter 2412 1 (autoclean) ip_tables 14648 6 [ipt_state ipt_MASQUERADE iptable_nat iptable_filter] ppp_synctty 7840 0 (unused) ppp_async 9376 1 ppp_generic 24316 3 [ppp_synctty ppp_async] slhc 6932 0 [ppp_generic] nvnet 30720 1 nls_iso8859-1 3548 1 (autoclean) nls_cp437 5148 1 (autoclean) keybdev 2880 0 (unused) mousedev 5428 1 hid 22020 0 (unused) input 5664 0 [keybdev mousedev hid] rtc 8444 0 (autoclean)
[7.4.] 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0290-0297 : w83627hf 02f8-02ff : serial(auto) 0376-0376 : ide1 0378-037a : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 0cf8-0cff : PCI conf1 5000-5007 : nForce2 SMBus 5040-5047 : nForce2 SMBus c000-cfff : PCI Bus #01 c000-c0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ c000-c0ff : 8139too d000-d007 : PCI device 10de:0066 (nVidia Corporation) d400-d4ff : PCI device 10de:006a (nVidia Corporation) d400-d4ff : NVIDIA nForce2 Audio d800-d87f : PCI device 10de:006a (nVidia Corporation) d800-d83f : NVIDIA nForce2 Audio e400-e41f : PCI device 10de:0064 (nVidia Corporation) f000-f00f : PCI device 10de:0065 (nVidia Corporation) f000-f007 : ide0 f008-f00f : ide1
00000000-0009ffff : System RAM 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000cc000-000cd7ff : Extension ROM 000f0000-000fffff : System ROM 00100000-1ffeffff : System RAM 00100000-00305268 : Kernel code 00305269-0038a943 : Kernel data 1fff0000-1fff2fff : ACPI Non-volatile Storage 1fff3000-1fffffff : ACPI Tables d0000000-d7ffffff : PCI device 10de:01e0 (nVidia Corporation) d8000000-dfffffff : PCI Bus #02 d8000000-dfffffff : nVidia Corporation NV10 [GeForce 256 SDR] d8000000-d9ffffff : rivafb e0000000-e1ffffff : PCI Bus #02 e0000000-e0ffffff : nVidia Corporation NV10 [GeForce 256 SDR] e2000000-e2ffffff : PCI Bus #01 e2000000-e20000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ e2000000-e20000ff : 8139too e3000000-e3000fff : PCI device 10de:0066 (nVidia Corporation) e3000000-e3000fff : nvnet e3001000-e3001fff : PCI device 10de:006a (nVidia Corporation) e3003000-e3003fff : PCI device 10de:0067 (nVidia Corporation) e3003000-e3003fff : usb-ohci e3004000-e3004fff : PCI device 10de:0067 (nVidia Corporation) e3004000-e3004fff : usb-ohci e3005000-e30050ff : PCI device 10de:0068 (nVidia Corporation) e3005000-e30050ff : ehci-hcd
[7.5.] 00:00.0 Host bridge: nVidia Corporation: Unknown device 01e0 (rev c1) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Capabilities: [40] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4 Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x4 Capabilities: [60] #08 [2001]
00:00.1 RAM memory: nVidia Corporation: Unknown device 01eb (rev c1) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.2 RAM memory: nVidia Corporation: Unknown device 01ee (rev c1) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.3 RAM memory: nVidia Corporation: Unknown device 01ed (rev c1) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.4 RAM memory: nVidia Corporation: Unknown device 01ec (rev c1) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.5 RAM memory: nVidia Corporation: Unknown device 01ef (rev c1) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a3) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [48] #08 [01e1]
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 12 Region 0: I/O ports at e400 [size=32] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 10 Region 0: Memory at e3003000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 11 Region 0: Memory at e3004000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin C routed to IRQ 4 Region 0: Memory at e3005000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] #0a [2080] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1) Subsystem: Micro-Star International Co., Ltd.: Unknown device 570c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e3000000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at d000 [size=8] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at d400 [size=256] Region 1: I/O ports at d800 [size=128] Region 2: Memory at e3001000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 PCI bridge: nVidia Corporation: Unknown device 006c (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: e2000000-e2ffffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Region 4: I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: e0000000-e1ffffff Prefetchable memory behind bridge: d8000000-dfffffff BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
01:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Allied Telesyn International AT-2500TX/ACPI Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at c000 [size=256] Region 1: Memory at e2000000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.0 VGA compatible controller: nVidia Corporation NV10 [GeForce 256 SDR] (rev 10) (prog-if 00 [VGA]) Subsystem: Elsa AG: Unknown device 0c41 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 12 Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4 Command: RQ=31 SBA- AGP+ 64bit- FW- Rate=x4
[7.6.] Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: CD-RW GCE-8320B Rev: 1.04 Type: CD-ROM ANSI SCSI revision: 02
[7.7.] -
[X.] If nothing works, a simple downgrade of ACPI modules would fix the problem...
Greeings, Jan Schiefer!
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |