lkml.org 
[lkml]   [2003]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectProblems w/ 2.6.0-test5 and orinocco device
In short, I can bring up dev eth2 which is a wireless net card 
(orinocco), but if I bring it down, it breaks. I can't do anything with
it anymore; I have to reboot before I can use it again. This didn't
happen in -test4. Once in a while in -test4 and below it did break but
broke differently. Mail me if you want details on it.

orinoco.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others)
orinoco_cs.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others)
orinoco_plx.c 0.13e (Daniel Barlow <dan@telent.net>, David Gibson
<hermes@gibson.dropbear.id.au>)

eth2: Station identity 001f:0001:0008:000a
eth2: Looks like a Lucent/Agere firmware version 8.10
eth2: Ad-hoc demo mode supported
eth2: IEEE standard IBSS ad-hoc mode supported
eth2: WEP supported, 104-bit key
eth2: MAC address 00:02:2D:5C:18:9F
eth2: Station name "HERMES I"
eth2: ready
eth2: index 0x01: Vcc 3.3, irq 9, io 0x0100-0x013f
eth2: New link status: Connected (0001)
spurious 8259A interrupt: IRQ7.
eth2: New link status: AP Out of Range (0004)
eth2: New link status: AP In Range (0005)


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:48    [W:0.096 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site