Messages in this thread | | | From | "Wong Onn Chee" <> | Subject | PROBLEM: dpt_i2o module not found while compiling kernel 2.4.22 | Date | Sun, 14 Sep 2003 12:13:22 +0800 |
| |
[1.] One line summary of the problem: dpt_i2o module not found at make install while compiling kernel 2.4.22 with CONFIG_SCSI_DPT_I2O=y or CONFIG_SCSI_DPT_I2O=m
[2.] Full description of the problem/report:
When CONFIG_SCSI_DPT_I2O=y or CONFIG_SCSI_DPT_I2O=m is selected, an error as shown below is encountered
"Root device is (8, 8) Boot sector 512 bytes. Setup is 2527 bytes. System is 1693 kB warning: kernel is too big for standalone boot from floppy sh -x ./install.sh 2.4.22 bzImage /tmp/linux-2.4.22/System.map "" + '[' -x /root/bin/installkernel ']' + '[' -x /sbin/installkernel ']' + exec /sbin/installkernel 2.4.22 bzImage /tmp/linux-2.4.22/System.map '' No module dpt_i2o found for kernel 2.4.22 mkinitrd failed make[1]: *** [install] Error 1 make[1]: Leaving directory `/tmp/linux-2.4.22/arch/i386/boot' make: *** [install] Error 2"
This error occurs even when dpt_i2o is selected as "y" not as "m".
[3.] Keywords (i.e., modules, networking, kernel):
Adaptec I2O RAID support
[4.] Kernel version (from /proc/version):
2.4.22
[5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt)
Nil as it cannot be installed
[6.] A small shell script or example program which triggers the problem (if possible)
make install
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
Linux www.resolvo.com 2.4.22-rc2 #1 SMP Sat Aug 9 19:04:16 SGT 2003 i686 i686 i386 GNU/Linux
Gnu C 3.2.2 Gnu make 3.79.1 util-linux 2.11y mount 2.11y modutils 2.4.22 e2fsprogs 1.32 jfsutils 1.0.17 reiserfsprogs 3.6.4 quota-tools 3.06. Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 2.0.11 Net-tools 1.60 Kbd 1.08 Sh-utils 4.5.3 Modules Loaded
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.40GHz stepping : 7 cpu MHz : 2399.368 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 s s ht tm bogomips : 4784.12
processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.40GHz stepping : 7 cpu MHz : 2399.368 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 s s ht tm bogomips : 4797.23
processor : 2 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.40GHz stepping : 7 cpu MHz : 2399.368 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 s s ht tm bogomips : 4797.23
processor : 3 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.40GHz stepping : 7 cpu MHz : 2399.368 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 s s ht tm bogomips : 4797.23
[7.3.] Module information (from /proc/modules):
Nil
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 02f8-02ff : serial(auto) 0376-0376 : ide1 03c0-03df : vga+ 03f8-03ff : serial(auto) 0cf8-0cff : PCI conf1 1100-111f : Intel Corp. 82801CA/CAM SMBus Controller 2000-201f : Intel Corp. 82801CA/CAM USB (Hub #1) 2020-203f : Intel Corp. 82801CA/CAM USB (Hub #2) 2040-205f : Intel Corp. 82801CA/CAM USB (Hub #3) 2060-206f : Intel Corp. 82801CA Ultra ATA Storage Controller 3000-3fff : PCI Bus #01 3000-3fff : PCI Bus #02 3000-303f : Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) 3000-303f : e1000 3040-307f : Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) (#2) 3040-307f : e1000 4000-40ff : ATI Technologies Inc Rage XL
00000000-0009e3ff : System RAM 0009e400-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000c8000-000c8fff : Extension ROM 000e0000-000effff : Extension ROM 000f0000-000fffff : System ROM 00100000-3feeffff : System RAM 00100000-003bd9e6 : Kernel code 003bd9e7-0047e843 : Kernel data 3fef0000-3fefbfff : ACPI Tables 3fefc000-3fefffff : ACPI Non-volatile Storage 3ff00000-3ff7ffff : System RAM 3ff80000-3fffffff : reserved 40000000-400003ff : Intel Corp. 82801CA Ultra ATA Storage Controller f8100000-f83fffff : PCI Bus #01 f8100000-f8100fff : Intel Corp. 82870P2 P64H2 I/OxAPIC f8101000-f8101fff : Intel Corp. 82870P2 P64H2 I/OxAPIC (#2) f8200000-f82fffff : PCI Bus #02 f8200000-f821ffff : Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) f8200000-f821ffff : e1000 f8220000-f823ffff : Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) (#2) f8220000-f823ffff : e1000 f8300000-f83fffff : PCI Bus #03 f8300000-f83fffff : Distributed Processing Technology SmartRAID V Controller f8400000-f8400fff : ATI Technologies Inc Rage XL f9000000-f9ffffff : ATI Technologies Inc Rage XL fb000000-fdffffff : PCI Bus #01 fb000000-fdffffff : PCI Bus #03 fb000000-fbffffff : Distributed Processing Technology SmartRAID V Controller fc000000-fdffffff : Distributed Processing Technology SmartRAID V Controller fec00000-fec0ffff : reserved fee00000-fee00fff : reserved ff800000-ffbfffff : reserved fff00000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corp.: Unknown device 254c (rev 01) Subsystem: Super Micro Computer Inc: Unknown device 3580 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [40] #09 [1105]
00:00.1 Class ff00: Intel Corp. e7500 [Plumas] DRAM Controller Error Reporting (rev 01) Subsystem: Super Micro Computer Inc: Unknown device 3580 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:02.0 PCI bridge: Intel Corp. e7500 [Plumas] HI_B Virtual PCI Bridge (F0) (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=03, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f8100000-f83fffff Prefetchable memory behind bridge: fb000000-fdffffff BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02) (prog-if 00 [UHCI]) Subsystem: Super Micro Computer Inc: Unknown device 3580 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 2000 [size=32]
00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02) (prog-if 00 [UHCI]) Subsystem: Super Micro Computer Inc: Unknown device 3580 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 2020 [size=32]
00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02) (prog-if 00 [UHCI]) Subsystem: Super Micro Computer Inc: Unknown device 3580 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 2040 [size=32]
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 42) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=64 I/O behind bridge: 00004000-00004fff Memory behind bridge: f8400000-f9ffffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801CA ISA Bridge (LPC) (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801CA IDE U100 (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Super Micro Computer Inc: Unknown device 3580 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at <ignored> Region 1: I/O ports at <ignored> Region 2: I/O ports at <ignored> Region 3: I/O ports at <ignored> Region 4: I/O ports at 2060 [size=16] Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus (rev 02) Subsystem: Super Micro Computer Inc: Unknown device 3580 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 1100 [size=32]
01:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 [IO(X)-APIC]) Subsystem: Super Micro Computer Inc: Unknown device 3580 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at f8100000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] PCI-X non-bridge device. Command: DPERE- ERO- RBC=0 OST=0 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- 01:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 10 Bus: primary=01, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 00003000-00003fff Memory behind bridge: f8200000-f82fffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort+ >Reset- FastB2B- Capabilities: [50] PCI-X non-bridge device. Command: DPERE+ ERO+ RBC=0 OST=4 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- 01:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 [IO(X)-APIC]) Subsystem: Super Micro Computer Inc: Unknown device 3580 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at f8101000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] PCI-X non-bridge device. Command: DPERE- ERO- RBC=0 OST=0 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- 01:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 10 Bus: primary=01, secondary=03, subordinate=03, sec-latency=48 I/O behind bridge: 0000f000-00000fff Memory behind bridge: f8300000-f83fffff Prefetchable memory behind bridge: 00000000fb000000-00000000fdf00000 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort+ >Reset- FastB2B- Capabilities: [50] PCI-X non-bridge device. Command: DPERE+ ERO+ RBC=0 OST=0 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- 02:03.0 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) (rev 01) Subsystem: Intel Corp. PRO/1000 MT Dual Port Server Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (63750ns min), cache line size 08 Interrupt: pin A routed to IRQ 54 Region 0: Memory at f8200000 (64-bit, non-prefetchable) [size=128K] Region 4: I/O ports at 3000 [size=64] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [e4] PCI-X non-bridge device. Command: DPERE- ERO+ RBC=0 OST=0 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000
02:03.1 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) (rev 01) Subsystem: Intel Corp. PRO/1000 MT Dual Port Server Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (63750ns min), cache line size 08 Interrupt: pin B routed to IRQ 55 Region 0: Memory at f8220000 (64-bit, non-prefetchable) [size=128K] Region 4: I/O ports at 3040 [size=64] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [e4] PCI-X non-bridge device. Command: DPERE- ERO+ RBC=0 OST=0 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000
03:03.0 RAID bus controller: Distributed Processing Technology SmartRAID V Controller (rev 01) Subsystem: Distributed Processing Technology: Unknown device c034 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (250ns min, 250ns max), cache line size 08 Interrupt: pin A routed to IRQ 30 BIST result: 00 Region 0: Memory at f8300000 (32-bit, non-prefetchable) [size=1M] Region 1: Memory at fb000000 (32-bit, prefetchable) [size=16M] Region 2: Memory at fc000000 (32-bit, prefetchable) [size=32M] Expansion ROM at 00095000 [disabled] [size=32K] Capabilities: [44] Power Management version 2 Flags: PMEClk+ DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:01.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc Rage XL Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), cache line size 08 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at 4000 [size=256] Region 2: Memory at f8400000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] SCSI information (from /proc/scsi/scsi)
Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ADAPTEC Model: RAID-1 Rev: 3B05 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 02 Lun: 00 Vendor: SEAGATE Model: ST336607LC Rev: 0006 Type: Direct-Access ANSI SCSI revision: 03 Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: SUPER Model: GEM318 Rev: 0 Type: Processor ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant): [X.] Other notes, patches, fixes, workarounds:
Applied patch-o-matic-20030107
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |