Messages in this thread | ![/](/images/icornerl.gif) | | Subject | IDE-SCSI bug | From | Ryan Fitch-Davis <> | Date | 08 Aug 2003 11:46:32 -0700 |
| |
[1.] One line summary of the problem: Timeouts and oops when ripping audio.
[2.] Full description of the problem/report: When attempting to rip audio data from a CD using CDparanoia, the process runs for several seconds, then locks up. System logs show timeouts in SCSI and lost IRQ from IDE. The kernel eventually oopsed and restarted the ATAPI device and a subsequent attempt to read from the CD failed mysteriously.
[3.] Keywords (i.e., modules, networking, kernel): IDE-SCSI timing kernel CD-ROM
[4.] Kernel version (from /proc/version): Linux version 2.6.0-test2 (root@morrigan) (gcc version 3.3.1 20030728 (Debian prerelease)) #9 Fri Aug 8 00:20:13 PDT 2003
[5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt) Aug 8 01:19:38 morrigan kernel: hdc: lost interrupt Aug 8 01:19:38 morrigan kernel: Call Trace: Aug 8 01:19:38 morrigan kernel: [schedule+942/947] schedule+0x3ae/0x3b3 Aug 8 01:19:38 morrigan kernel: [schedule_timeout+90/171] schedule_timeout+0x5a/0xab Aug 8 01:19:38 morrigan kernel: [printk+299/380] printk+0x12b/0x17c Aug 8 01:19:38 morrigan kernel: [process_timeout+0/12] process_timeout+0x0/0xcAug 8 01:19:38 morrigan kernel: [idescsi_abort+143/232] idescsi_abort+0x8f/0xe8 Aug 8 01:19:38 morrigan kernel: [scsi_try_to_abort_cmd+94/127] scsi_try_to_abort_cmd+0x5e/0x7f Aug 8 01:19:38 morrigan kernel: [scsi_eh_abort_cmds+87/222] scsi_eh_abort_cmds+0x57/0xde Aug 8 01:19:38 morrigan kernel: [scsi_unjam_host+336/511] scsi_unjam_host+0x150/0x1ff Aug 8 01:19:38 morrigan kernel: [scsi_error_handler+260/443] scsi_error_handler+0x104/0x1bb Aug 8 01:19:38 morrigan kernel: [scsi_error_handler+0/443] scsi_error_handler+0x0/0x1bb Aug 8 01:19:38 morrigan kernel: [kernel_thread_helper+5/11] kernel_thread_helper+0x5/0xb Aug 8 01:19:38 morrigan kernel: [[The above trace repeated 16 more times]] Aug 8 01:19:46 morrigan kernel: --[ cut here ]-- Aug 8 01:19:46 morrigan kernel: kernel BUG at kernel/timer.c:166! Aug 8 01:19:46 morrigan kernel: invalid operand: 0000 [#1] Aug 8 01:19:46 morrigan kernel: CPU: 0 Aug 8 01:19:46 morrigan kernel: EIP: 0060:[add_timer+153/163] Not taintedAug 8 01:19:46 morrigan kernel: EFLAGS: 00010002 Aug 8 01:19:46 morrigan kernel: EIP is at add_timer+0x99/0xa3 Aug 8 01:19:46 morrigan kernel: eax: 00000001 ebx: dfce6000 ecx: c046cfa0 edx: c0478fbc Aug 8 01:19:46 morrigan kernel: esi: 00000000 edi: dfd06ca4 ebp: dfce7ea0 esp: dfce7e8c Aug 8 01:19:46 morrigan kernel: ds: 007b es: 007b ss: 0068 Aug 8 01:19:46 morrigan kernel: Process scsi_eh_0 (pid: 10, threadinfo=dfce6000 task=dfd30100) Aug 8 01:19:46 morrigan kernel: Stack: 00000046 00000032 dfce6000 00000000 c0478fbc dfce7ed0 c0266c65 dfd06ca4 Aug 8 01:19:46 morrigan kernel: c026664f 00000032 00000000 dfd06c80 c0478f10 00000092 00000000 c0478fbc Aug 8 01:19:46 morrigan kernel: c0478fcc dfce7ee0 c0266ca2 c0478fbc 00000000 dfce7f00 c02822d1 c0478fbc Aug 8 01:19:46 morrigan kernel: Call Trace: Aug 8 01:19:46 morrigan kernel: [do_reset1+570/606] do_reset1+0x23a/0x25e Aug 8 01:19:46 morrigan kernel: [atapi_reset_pollfunc+0/292] atapi_reset_pollfunc+0x0/0x124 Aug 8 01:19:46 morrigan kernel: [ide_do_reset+25/29] ide_do_reset+0x19/0x1d Aug 8 01:19:46 morrigan kernel: [idescsi_reset+224/285] idescsi_reset+0xe0/0x11d Aug 8 01:19:46 morrigan kernel: [scsi_try_bus_device_reset+87/146] scsi_try_bus_device_reset+0x57/0x92 Aug 8 01:19:46 morrigan kernel: [scsi_eh_bus_device_reset+127/360] scsi_eh_bus_device_reset+0x7f/0x168 Aug 8 01:19:46 morrigan kernel: [scsi_eh_ready_devs+40/116] scsi_eh_ready_devs+0x28/0x74 Aug 8 01:19:46 morrigan kernel: [scsi_unjam_host+362/511] scsi_unjam_host+0x16a/0x1ff Aug 8 01:19:46 morrigan kernel: [scsi_error_handler+260/443] scsi_error_handler+0x104/0x1bb Aug 8 01:19:46 morrigan kernel: [scsi_error_handler+0/443] scsi_error_handler+0x0/0x1bb Aug 8 01:19:46 morrigan kernel: [kernel_thread_helper+5/11] kernel_thread_helper+0x5/0xb Aug 8 01:19:46 morrigan kernel: Aug 8 01:19:46 morrigan kernel: Code: 0f 0b a6 00 33 bb 35 c0 eb 8d 55 31 c0 89 e5 83 ec 14 89 7d Aug 8 01:19:46 morrigan kernel: <6>note: scsi_eh_0[10] exited with preempt_count 3 Aug 8 01:19:48 morrigan kernel: hdc: ATAPI reset complete
[6.] A small shell script or example program which triggers the problem (if possible)
#!/bin/sh abcde 2
[7.] Environment [7.1.] Software (add the output of the ver_linux script here) If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux morrigan 2.6.0-test2 #9 Fri Aug 8 00:20:13 PDT 2003 i686 GNU/Linux Gnu C 3.3.1 Gnu make 3.80 util-linux 2.11z mount 2.11z e2fsprogs 1.35-WIP pcmcia-cs 3.2.2 PPP 2.4.1 nfs-utils 1.0.5 Linux C Library 2.3.1 Dynamic linker (ldd) 2.3.1 Procps 3.1.11 Net-tools 1.60 Kbd command Sh-utils 5.0 Modules Loaded slip slhc binfmt_misc snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd nls_iso8859_1 ntfs smbfs usb_storage
[7.2.] Processor information (from /proc/cpuinfo): processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz stepping : 7 cpu MHz : 1989.519 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid bogomips : 3923.96
[7.3.] Module information (from /proc/modules): slip 11232 1 - Live 0xe284c000 slhc 6144 1 slip, Live 0xe2991000 binfmt_misc 8200 1 - Live 0xe294f000 snd_seq_oss 33280 0 - Live 0xe29b2000 snd_seq_midi_event 5888 1 snd_seq_oss, Live 0xe294c000 snd_seq 55696 4 snd_seq_oss,snd_seq_midi_event, Live 0xe29a3000 snd_pcm_oss 56484 1 - Live 0xe2959000 snd_mixer_oss 18688 2 snd_pcm_oss, Live 0xe2953000 snd_intel8x0 29956 2 - Live 0xe292b000 snd_ac97_codec 50436 1 snd_intel8x0, Live 0xe2983000 snd_pcm 95908 2 snd_pcm_oss,snd_intel8x0, Live 0xe296a000 snd_timer 23940 2 snd_seq,snd_pcm, Live 0xe2934000 snd_page_alloc 8452 2 snd_intel8x0,snd_pcm, Live 0xe2853000 snd_mpu401_uart 7040 1 snd_intel8x0, Live 0xe2850000 snd_rawmidi 22048 1 snd_mpu401_uart, Live 0xe28eb000 snd_seq_device 7176 3 snd_seq_oss,snd_seq,snd_rawmidi, Live 0xe2847000 snd 53636 12 snd_seq_oss,snd_seq_midi_event,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device, Live 0xe293d000 nls_iso8859_1 3968 1 - Live 0xe284a000 ntfs 84940 1 - Live 0xe28f4000 smbfs 61176 0 - Live 0xe28ca000 usb_storage 60736 0 - Live 0xe2859000
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-005f : timer 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 0378-037a : parport0 037b-037f : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial 0cf8-0cff : PCI conf1 1080-109f : Sony Programable I/O Device 1400-14ff : PCI CardBus #03 1800-181f : Intel Corp. 82801CA/CAM USB (Hub 1800-181f : uhci-hcd 1820-183f : Intel Corp. 82801CA/CAM USB (Hub 1820-183f : uhci-hcd 1840-185f : Intel Corp. 82801CA/CAM USB (Hub 1840-185f : uhci-hcd 1860-186f : Intel Corp. 82801CAM IDE U100 1860-1867 : ide0 1868-186f : ide1 1880-189f : Intel Corp. 82801CA/CAM SMBus 18c0-18ff : Intel Corp. 82801CA/CAM AC'97 Au 18c0-18ff : Intel 82801CA-ICH3 - Controller 1c00-1cff : Intel Corp. 82801CA/CAM AC'97 Au 1c00-1cff : Intel 82801CA-ICH3 - AC'97 2000-207f : Intel Corp. 82801CA/CAM AC'97 Mo 2400-24ff : Intel Corp. 82801CA/CAM AC'97 Mo 2800-28ff : PCI CardBus #03 2c00-2cff : PCI CardBus #07 3000-3fff : PCI Bus #01 3000-30ff : ATI Technologies Inc Radeon Mobility M7 L 4000-403f : Intel Corp. 82801CAM (ICH3) PRO/ 4000-403f : eepro100 4400-44ff : PCI CardBus #07
/proc/iomem 00000000-0009e7ff : System RAM 0009e800-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000d8000-000dffff : reserved 000f0000-000fffff : System ROM 00100000-1feeffff : System RAM 00100000-00346b14 : Kernel code 00346b15-00439e7f : Kernel data 1fef0000-1fefefff : ACPI Tables 1feff000-1fefffff : ACPI Non-volatile Storage 1ff00000-1ff7ffff : System RAM 1ff80000-1fffffff : reserved 20000000-20000fff : Ricoh Co Ltd RL5c476 II 20001000-20001fff : Ricoh Co Ltd RL5c476 II (#2) 20400000-207fffff : PCI CardBus #03 20800000-20bfffff : PCI CardBus #03 20c00000-20ffffff : PCI CardBus #07 21000000-213fffff : PCI CardBus #07 e8000000-e80003ff : Intel Corp. 82801CAM IDE U100 e8100000-e81fffff : PCI Bus #01 e8100000-e810ffff : ATI Technologies Inc Radeon Mobility M7 L e8100000-e810ffff : radeonfb e8200000-e8200fff : Intel Corp. 82801CAM (ICH3) PRO/ e8200000-e8200fff : eepro100 e8201000-e82017ff : Ricoh Co Ltd R5C552 IEEE 1394 Con e8201000-e82017ff : ohci1394 ec000000-efffffff : Intel Corp. 82845 845 (Brookdale f0000000-f7ffffff : PCI Bus #01 f0000000-f7ffffff : ATI Technologies Inc Radeon Mobility M7 L f0000000-f7ffffff : radeonfb ff800000-ffbfffff : reserved fff80000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root) 00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04) Subsystem: Sony Corporation: Unknown device 80fa Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at ec000000 (32-bit, prefetchable) [size=64M] Capabilities: [e4] #09 [d104] Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4 00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 96 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00003000-00003fff Memory behind bridge: e8100000-e81fffff Prefetchable memory behind bridge: f0000000-f7ffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- 00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 80fa Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 9 Region 4: I/O ports at 1800 [size=32] 00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 80fa Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 9 Region 4: I/O ports at 1820 [size=32] 00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 80fa Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 9 Region 4: I/O ports at 1840 [size=32] 00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 42) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 00004000-00004fff Memory behind bridge: e8200000-e82fffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Sony Corporation: Unknown device 80fa Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 255 Region 0: I/O ports at <ignored> Region 1: I/O ports at <ignored> Region 2: I/O ports at <ignored> Region 3: I/O ports at <ignored> Region 4: I/O ports at 1860 [size=16] Region 5: Memory at e8000000 (32-bit, non-prefetchable) [size=1K] 00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus (rev 02) Subsystem: Sony Corporation: Unknown device 80fa Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 9 Region 4: I/O ports at 1880 [size=32] 00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio (rev 02) Subsystem: Sony Corporation: Unknown device 80fa Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 9 Region 0: I/O ports at 1c00 [size=256] Region 1: I/O ports at 18c0 [size=64] 00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem (rev 02) (prog-if 00 [Generic]) Subsystem: Sony Corporation: Unknown device 80fa Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 9 Region 0: I/O ports at 2400 [size=256] Region 1: I/O ports at 2000 [size=128] 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] (prog-if 00 [VGA]) Subsystem: Sony Corporation: Unknown device 80fa Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B+ Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min), cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 3000 [size=256] Region 2: Memory at e8100000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4 Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:05.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8) Subsystem: Sony Corporation: Unknown device 80fa Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 Interrupt: pin A routed to IRQ 9 Region 0: Memory at 20000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: 20400000-207ff000 (prefetchable) Memory window 1: 20800000-20bff000 I/O window 0: 00001400-000014ff I/O window 1: 00002800-000028ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 02:05.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8) Subsystem: Sony Corporation: Unknown device 80fa Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 Interrupt: pin B routed to IRQ 9 Region 0: Memory at 20001000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 20c00000-20fff000 (prefetchable) Memory window 1: 21000000-213ff000 I/O window 0: 00002c00-00002cff I/O window 1: 00004400-000044ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 02:05.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (prog-if 10 [OHCI]) Subsystem: Sony Corporation: Unknown device 80fa Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 1000ns max) Interrupt: pin C routed to IRQ 9 Region 0: Memory at e8201000 (32-bit, non-prefetchable) [size=2K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME+ 02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42) Subsystem: Sony Corporation: Unknown device 80fa Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min, 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: Memory at e8200000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 4000 [size=64] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME-
[7.6.] SCSI information (from /proc/scsi/scsi) Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TOSHIBA Model: DVD-ROM SD-R6012 Rev: 1S31 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: Sony Model: MSC-U03 Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant): [X.] Other notes, patches, fixes, workarounds: Rebuilding with kernel pre-empt turned off produces same error.
-- Run down by the drunken taxicabs of Absolute Reality.
sithriel@earthlink.net
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| ![\](/images/icornerr.gif) |