Messages in this thread | | | Subject | 2.4.22pre10-ac1: ICH5 SATA missing in action | From | Jurgen Kramer <> | Date | 03 Aug 2003 20:18:25 +0200 |
| |
With 2.4.22pre10-ac1 the SATA part of the ICH5 is no longer found or recognized. With a plain 2.4.22pre3 (last 2.4.22pre I tested) it was working properly.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio hda: WDC WD1200JB-00EVA0, ATA DISK drive blk: queue c033ab60, I/O limit 4095Mb (mask 0xffffffff) hdc: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63, UDMA(100)
I am not sure if this was reported already.
Greetings,
Jurgen
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |