Messages in this thread | | | Date | Wed, 27 Aug 2003 18:27:55 -0400 | From | Jeff Garzik <> | Subject | [bk patches] 2.6.x net driver queue |
| |
Here's the pile waiting for Linus, so far.
BK users:
bk pull bk://kernel.bkbits.net/jgarzik/net-drivers-2.6 or bk pull http://gkernel.bkbits.net/net-drivers-2.6
Patch users:
ftp://ftp.kernel.org/pub/linux/kernel/people/jgarzik/patchkits/2.6/2.6.0-test4-bk2-netdrvr2.patch.bz2
This will update the following files:
drivers/net/3c501.c | 91 ---- drivers/net/3c501.h | 2 drivers/net/3c503.c | 71 --- drivers/net/3c505.c | 96 +--- drivers/net/3c507.c | 97 +---- drivers/net/3c515.c | 94 ---- drivers/net/3c523.c | 73 --- drivers/net/3c527.c | 94 ---- drivers/net/3c59x.c | 47 -- drivers/net/8139cp.c | 444 +++++++++-------------- drivers/net/8139too.c | 391 +++++++------------- drivers/net/Kconfig | 4 drivers/net/pcmcia/3c574_cs.c | 28 - drivers/net/pcmcia/3c589_cs.c | 81 +--- drivers/net/pcmcia/axnet_cs.c | 28 - drivers/net/pcmcia/fmvj18x_cs.c | 75 +-- drivers/net/pcmcia/ibmtr_cs.c | 35 - drivers/net/pcmcia/nmclan_cs.c | 77 +-- drivers/net/pcmcia/pcnet_cs.c | 41 -- drivers/net/pcmcia/xirc2ps_cs.c | 28 - drivers/net/sis190.c | 221 ++++++----- drivers/net/sis900.c | 62 +-- drivers/net/tulip/dmfe.c | 62 --- drivers/net/tulip/xircom_cb.c | 38 - drivers/net/wireless/airo.c | 772 +++++++++++++++++++++++++++++++++------- drivers/net/wireless/ray_cs.c | 32 - net/core/ethtool.c | 12 27 files changed, 1398 insertions(+), 1698 deletions(-)
through these ChangeSets:
<romieu@fr.zoreil.com> (03/08/27 1.1316) [netdrvr sis190] use PCI DMA API for RX buffers Missing pieces for DMA-API on the Rx side: - SiS190_init_ring: the global area for the received data is mapped. This area is persistent during the whole driver's life. It only needs to be unmapped in SiS190_close() as no other exit/error path exists. - SiS190_rx_interrupt: no map/unmap for received data buffer. A single sync operation is done. Btw, there is no need to store the same value in RxDescArray[cur_rx].buf_addr over and over again. - Remove driver dependancy on CONFIG_BROKEN.
<willy@debian.org> (03/08/27 1.1315) [netdrvr 8139too] ethtool_ops support
<willy@debian.org> (03/08/27 1.1314) [ethtool] fix ethtool_get_strings counting bug
<jgarzik@redhat.com> (03/08/26 1.1313) [netdrvr sis190] small bug fixes * call pci_set_dma_mask * remove erroneous call to unregister_netdev in _init_board()
<javier@tudela.mad.ttd.net> (03/08/26 1.1312) [wireless airo] add support for MIC and latest firmwares
<greg@kroah.com> (03/08/26 1.1311) [netdrvr sis900] don't call pci_find_device from irq context I realized that I've had this patch in my tree for a while, and forgot to send it to you and lkml. The patch below fixes bug number 923: http://bugme.osdl.org/show_bug.cgi?id=923 (basically keeps us from calling pci_find_device from interrupt context.) It's been tested by a few people with this device, and they say it works just fine for them. Please forward it on up the food chain.
<hirofumi@mail.parknet.co.jp> (03/08/26 1.1310) [netdrvr 8139too] add more h/w revision ids
<hirofumi@mail.parknet.co.jp> (03/08/26 1.1309) [netdrvr 8139too] remove unused RxConfigMask
<hirofumi@mail.parknet.co.jp> (03/08/26 1.1308) [netdrvr 8139too] lwake unlock fix
<srompf@isg.de> (03/08/26 1.1307) [netdrvr 8139too] use mii_check_media lib function, instead of homebrew MII bitbanging.
<romieu@fr.zoreil.com> (03/08/26 1.1306) [netdrvr sis190] remove unneeded alignment code, other small fixes Driver does not need to enforce 256 byte alignment for data returned from pci_alloc_consistent(). - {rx/tx}_dma_aligned and {rx/td}_dma_raw are both replaced by {rx/tx}_dma; - {rx/tx}_desc_raw is replaced by direct use of {Rx/Tx}DescArray; - SiS190_open() + fixup for a lack of kmalloc() failure handling; + (return status) there is no need for both retval/rc: merge them; + anonymous printk() fixup: the name of the guilty device is printed; - define {RX/TX}_DESC_TOTAL_SIZE because I am too lazy to read twice the same lengthy arithmetic expression.
<jgarzik@redhat.com> (03/08/26 1.1305) [wireless ray_cs] ethtool_ops support
<jgarzik@redhat.com> (03/08/26 1.1304) [netdrvr xircom_cb] ethtool_ops support Also, export PCI bus id via ETHTOOL_GDRVINFO.
<jgarzik@redhat.com> (03/08/26 1.1303) [netdrvr pcmcia] convert several drivers to ethtool_ops Drivers updated: fmvj18x_cs, ibmtr_cs, nmclan_cs, pcnet_cs, xirc2ps_cs.
<jgarzik@redhat.com> (03/08/26 1.1302) [netdrvr pcmcia] ethtool_ops for 3c574, 3c589, axnet
<jgarzik@redhat.com> (03/08/26 1.1301) [netdrvr] ethtool_ops support for 3c515, 3c523, 3c527, and dmfe
<jgarzik@redhat.com> (03/08/26 1.1300) [netdrvr] ethtool_ops support in 3c503, 3c505, 3c507
<jgarzik@redhat.com> (03/08/26 1.1299) [netdrvr 3c501] ethtool_ops support
<jgarzik@redhat.com> (03/08/26 1.1298) [netdrvr sis190] make driver depend on CONFIG_BROKEN Until RX path is cleaned up to use PCI DMA API and not virt_to_bus.
<jgarzik@redhat.com> (03/08/26 1.1297) [netdrvr sis190] convert TX path to use PCI DMA API Also, minor changes: * mark ->hard_start_xmit ETH_ZLEN test as unlikely() * use cpu_to_le32() and le32_to_cpu() in TX path * fix two leak in error path, in ->hard_start_xmit * don't test netif_queue_stopped() in TX completion path, netif_wake_queue() already does that.
<jgarzik@redhat.com> (03/08/26 1.1296) [netdrvr 8139cp] ethtool_ops support
<jgarzik@redhat.com> (03/08/26 1.1295) [netdrvr sis900] ethtool_ops support
<willy@debian.org> (03/08/26 1.1294) [netdrvr 3c59x] ethtool_ops support
<romieu@fr.zoreil.com> (03/08/26 1.1293) [netdrvr sis190] pass irq argument to synchronize_irq() Looks like this driver wasn't tested on SMP :)
<bunk@fs.tum.de> (03/08/26 1.1292) [netdrvr sis190] fix build with older gcc older gcc's do not support C99/C++ style of variable declarations.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |