Messages in this thread | ![/](/images/icornerl.gif) | | Subject | Kernel 2.4 problem with 3C905B NIC | From | Edward Tandi <> | Date | 03 Jul 2003 19:24:36 +0100 |
| |
I am currently using kernels 2.4.21-rc1 and 2.4.22-pre2.
I think there is a problem with the 3c59x module. Between two machines lies a D-Link 100Base-TX Fast Ethernet Hub and a Netgear DS104 switch. I think the D-Link has only half-duplex capability.
NICs at both ends initialise in 100Mbit mode.
What happens is that during large transfers, there are a very large number of collisions on the network. This results in the transfer rate slowing down to somewhere between 3KB-7KB per second.
Googling shows that there have been a number of problems in the past regarding Linux and the 3C905B. History indicates that card appears to work on Windows machines but have serious performance problems under Linux in certain circumstances.
I have tried the various duplex module options and nothing helps. In fact long transfers appear to trigger a Tulip lockup at the other end.
For those suffering, I have found a temporary work-around. Build the driver (3c90x-102.tar.gz) at:
http://support.3com.com/infodeli/tools/nic/linuxdownload.htm
Despite all the compilation warnings, all works well! Transfer speeds have increased to between 7MB-9MB per second, which is what I would expect it to be.
The 3com site says that the driver is unsupported. Pity. Is there a maintainer for the 3c59x module? The last entry in 3c59x.c was by akpm July 2001. I presume this issues has been around for a while.
Ed-T.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| ![\](/images/icornerr.gif) |