lkml.org 
[lkml]   [2003]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: 2.6.0-test1 + matroxfb = unuusable VC
On 21 Jul 03 at 17:45, nick black wrote:

> i'm seeing the exact same issues. i use to see similar problems in late
> 2.4's with agp turned on, where turning off agp sorted out the issue.
> using 2.6 (test1-ac2), it happens whether agp is turned on or not.

I do not think that it has anything to do with AGP, as matroxfb does not
initiate any AGP transfers.

> some info: (cmdline, dmesg, config, lspci -v -v for bridge/card):
>
> video=matroxfb:vesa:0x1bb

I think that you are using fbset somewhere in your initscripts. Either
do not do that, or apply
ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/matroxfb-2.5.72.gz.

> PCI: No IRQ known for interrupt pin A of device 01:00.0. Please try
> using pci=biosirq.

And reconfigure your system to assign IRQ to the AGP devices too.
matroxfb uses it for delivering some notifications to the userspace
programs...

> Interrupt: pin A routed to IRQ 0

... if it hooked IRQ0 as MGA interrupt, anything can happen.
Best regards,
Petr Vandrovec
vandrove@vc.cvut.cz

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:47    [W:0.025 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site