Messages in this thread | | | Date | Fri, 6 Jun 2003 15:39:39 -0600 | From | jmerkey@s1 ... | Subject | 2.4.20 Modprobe setting of eth0,eth1 does not seem to work |
| |
In 2.4.20 if I attempt to use the Intel multiport e1000 drivers with modules.conf trying to hard set the eth0,eth1, etc. assignments modprobe does not appear to be assigning the adapter aliases correctly. I am assuming this may be due to an interface issue between the Keyboard and monitor. :-)
Modules.conf file attached. Anyone got any ideas here?
Jeff
alias parport_lowlevel parport_pc alias usb-controller usb-uhci alias eth0 e1000 alias eth1 e1000 alias eth2 e1000 alias eth3 e1000 alias eth4 e1000 alias eth5 e1000 alias eth6 e1000 alias eth7 e1000 alias eth8 e1000 alias eth9 e1000 options eth0 -o e1000-0 io=0x4000 irq=96 options eth1 -o e1000-1 io=0x4040 irq=97 options eth2 -o e1000-2 io=0x3000 options eth3 -o e1000-3 io=0x3040 options eth4 -o e1000-4 io=0x3080 options eth5 -o e1000-5 io=0x30c0 options eth6 -o e1000-6 io=0x4080 options eth7 -o e1000-7 io=0x40c0 options eth8 -o e1000-8 io=0x5000 options eth9 -o e1000-9 io=0x5040
| |