lkml.org 
[lkml]   [2003]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectide-ops.c line 1262 and ide-scsi
Watch out for ide-ops.c:1262 when using ide-scsi.  ide-scsi does
NOT seem to work when I haven't previously loaded ide-floppy and/or
ide-cd to let me use my drives. However, once I have done so, it
works for about 4 seconds. Then it dies. I can pull the stack trace
and register dump out of my syslog, but I can tell you the EIP is 0010,
the kernel is in interrupt, and it's not tainted. Experienced with both a
standard 2.4.21 kernel and a 2.4.21-smt (supermount-ng.sf.net patch)
kernel.

Versions Affected:
2.4.21
2.4.21 + supermount.sf.net 2.4.21-rc1 patch
Source affected:
ide-ops.c:1262
Recreation method:
modprobe ide-cd
modprobe ide-floppy
modprobe ide-scsi
Try to access the media, or just fool around a while
Hardware:
CPU: AMD K7-Athlon XP 1.8 Ghz
RAM: 256 MB DDR
Drives:
40 GB IDE Samsung hard drive
40 GB IDE Maxtor hard drive
IDE Creative CD-RW
IDE Iomega Zip drive
Standard 3.5 inch double density high capacity floppy drive

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:36    [W:0.027 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site