lkml.org 
[lkml]   [2003]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] 2.4.21 synclink.c
From
Date
* Add support for version 2 of synclink PCI adapter
* Fix arbitration between net open and tty open
* Use time_after() macro
* Use mod_timer() macro

Please apply.


--
Paul Fulghum, paulkf@microgate.com
Microgate Corporation, http://www.microgate.com

--- linux-2.4.21/drivers/char/synclink.c 2002-11-28 17:53:12.000000000 -0600
+++ linux-2.4.21-mg/drivers/char/synclink.c 2003-06-19 08:25:43.000000000 -0500
@@ -1,7 +1,7 @@
/*
* linux/drivers/char/synclink.c
*
- * $Id: synclink.c,v 3.12 2001/07/18 19:14:21 paulkf Exp $
+ * $Id: synclink.c,v 3.18 2003/06/18 21:02:25 paulkf Exp $
*
* Device driver for Microgate SyncLink ISA and PCI
* high speed multiprotocol serial adapters.
@@ -198,6 +198,7 @@
int flags;
int count; /* count of opens */
int line;
+ int hw_version;
unsigned short close_delay;
unsigned short closing_wait; /* time to wait before closing */

@@ -922,7 +923,7 @@
MODULE_PARM(txholdbufs,"1-" __MODULE_STRING(MAX_TOTAL_DEVICES) "i");

static char *driver_name = "SyncLink serial driver";
-static char *driver_version = "$Revision: 3.12 $";
+static char *driver_version = "$Revision: 3.18 $";

static int __init synclink_init_one (struct pci_dev *dev,
const struct pci_device_id *ent);
@@ -930,6 +931,7 @@

static struct pci_device_id synclink_pci_tbl[] __devinitdata = {
{ PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_USC, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_MICROGATE, 0x0210, PCI_ANY_ID, PCI_ANY_ID, },
{ 0, }, /* terminate list */
};
MODULE_DEVICE_TABLE(pci, synclink_pci_tbl);
@@ -3251,14 +3253,17 @@
{
struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data;

- if (!info || mgsl_paranoia_check(info, tty->device, "mgsl_close"))
+ if (mgsl_paranoia_check(info, tty->device, "mgsl_close"))
return;

if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_close(%s) entry, count=%d\n",
__FILE__,__LINE__, info->device_name, info->count);

- if (!info->count || tty_hung_up_p(filp))
+ if (!info->count)
+ return;
+
+ if (tty_hung_up_p(filp))
goto cleanup;

if ((tty->count == 1) && (info->count != 1)) {
@@ -3393,7 +3398,7 @@
schedule_timeout(char_time);
if (signal_pending(current))
break;
- if (timeout && ((orig_jiffies + timeout) < jiffies))
+ if (timeout && time_after(jiffies, orig_jiffies + timeout))
break;
}
} else {
@@ -3403,7 +3408,7 @@
schedule_timeout(char_time);
if (signal_pending(current))
break;
- if (timeout && ((orig_jiffies + timeout) < jiffies))
+ if (timeout && time_after(jiffies, orig_jiffies + timeout))
break;
}
}
@@ -3612,16 +3617,11 @@
info = mgsl_device_list;
while(info && info->line != line)
info = info->next_device;
- if ( !info ){
- printk("%s(%d):Can't find specified device on open (line=%d)\n",
- __FILE__,__LINE__,line);
+ if (mgsl_paranoia_check(info, tty->device, "mgsl_open"))
return -ENODEV;
- }

tty->driver_data = info;
info->tty = tty;
- if (mgsl_paranoia_check(info, tty->device, "mgsl_open"))
- return -ENODEV;

if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_open(%s), old ref count = %d\n",
@@ -3695,6 +3695,8 @@

cleanup:
if (retval) {
+ if (tty->count == 1)
+ info->tty = 0; /* tty layer will release tty struct */
if(MOD_IN_USE)
MOD_DEC_USE_COUNT;
if(info->count)
@@ -4291,9 +4293,7 @@
info->get_tx_holding_index=0;

/* restart transmit timer */
- del_timer(&info->tx_timer);
- info->tx_timer.expires = jiffies + jiffies_from_ms(5000);
- add_timer(&info->tx_timer);
+ mod_timer(&info->tx_timer, jiffies + jiffies_from_ms(5000));

ret = 1;
}
@@ -4511,12 +4511,12 @@
info->max_frame_size = 65535;

if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
- printk( "SyncLink device %s added:PCI bus IO=%04X IRQ=%d Mem=%08X LCR=%08X MaxFrameSize=%u\n",
- info->device_name, info->io_base, info->irq_level,
+ printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n",
+ info->hw_version + 1, info->device_name, info->io_base, info->irq_level,
info->phys_memory_base, info->phys_lcr_base,
info->max_frame_size );
} else {
- printk( "SyncLink device %s added:ISA bus IO=%04X IRQ=%d DMA=%d MaxFrameSize=%u\n",
+ printk( "SyncLink ISA %s: IO=%04X IRQ=%d DMA=%d MaxFrameSize=%u\n",
info->device_name, info->io_base, info->irq_level, info->dma_level,
info->max_frame_size );
}
@@ -5375,10 +5375,11 @@
info->mbre_bit = BIT8;
outw( BIT8, info->io_base ); /* set Master Bus Enable (DCAR) */

- /* Enable DMAEN (Port 7, Bit 14) */
- /* This connects the DMA request signal to the ISA bus */
- /* on the ISA adapter. This has no effect for the PCI adapter */
- usc_OutReg( info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) & ~BIT14) );
+ if (info->bus_type == MGSL_BUS_TYPE_ISA) {
+ /* Enable DMAEN (Port 7, Bit 14) */
+ /* This connects the DMA request signal to the ISA bus */
+ usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) & ~BIT14));
+ }

/* DMA Control Register (DCR)
*
@@ -6355,10 +6356,11 @@

usc_EnableMasterIrqBit( info );

- /* Enable INTEN (Port 6, Bit12) */
- /* This connects the IRQ request signal to the ISA bus */
- /* on the ISA adapter. This has no effect for the PCI adapter */
- usc_OutReg( info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12) );
+ if (info->bus_type == MGSL_BUS_TYPE_ISA) {
+ /* Enable INTEN (Port 6, Bit12) */
+ /* This connects the IRQ request signal to the ISA bus */
+ usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
+ }

} /* end of usc_set_async_mode() */

@@ -6449,10 +6451,11 @@
usc_loopback_frame( info );
usc_set_sdlc_mode( info );

- /* Enable INTEN (Port 6, Bit12) */
- /* This connects the IRQ request signal to the ISA bus */
- /* on the ISA adapter. This has no effect for the PCI adapter */
- usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
+ if (info->bus_type == MGSL_BUS_TYPE_ISA) {
+ /* Enable INTEN (Port 6, Bit12) */
+ /* This connects the IRQ request signal to the ISA bus */
+ usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
+ }

usc_enable_aux_clock(info, info->params.clock_speed);

@@ -7496,7 +7499,7 @@
EndTime = jiffies + jiffies_from_ms(100);

for(;;) {
- if ( jiffies > EndTime ) {
+ if (time_after(jiffies, EndTime)) {
rc = FALSE;
break;
}
@@ -7552,7 +7555,7 @@
EndTime = jiffies + jiffies_from_ms(100);

for(;;) {
- if ( jiffies > EndTime ) {
+ if (time_after(jiffies, EndTime)) {
rc = FALSE;
break;
}
@@ -7600,7 +7603,7 @@
spin_unlock_irqrestore(&info->irq_spinlock,flags);

while ( !(status & (BIT6+BIT5+BIT4+BIT2+BIT1)) ) {
- if ( jiffies > EndTime ) {
+ if (time_after(jiffies, EndTime)) {
rc = FALSE;
break;
}
@@ -7627,8 +7630,7 @@
/* Wait for 16C32 to write receive status to buffer entry. */
status=info->rx_buffer_list[0].status;
while ( status == 0 ) {
- if ( jiffies > EndTime ) {
- printk(KERN_ERR"mark 4\n");
+ if (time_after(jiffies, EndTime)) {
rc = FALSE;
break;
}
@@ -8202,17 +8204,20 @@
info->bus_type = MGSL_BUS_TYPE_PCI;
info->io_addr_size = 8;
info->irq_flags = SA_SHIRQ;
-
- /* Store the PCI9050 misc control register value because a flaw
- * in the PCI9050 prevents LCR registers from being read if
- * BIOS assigns an LCR base address with bit 7 set.
- *
- * Only the misc control register is accessed for which only
- * write access is needed, so set an initial value and change
- * bits to the device instance data as we write the value
- * to the actual misc control register.
- */
- info->misc_ctrl_value = 0x087e4546;
+
+ if (dev->device == 0x0210) {
+ /* Version 1 PCI9030 based universal PCI adapter */
+ info->misc_ctrl_value = 0x007c4080;
+ info->hw_version = 1;
+ } else {
+ /* Version 0 PCI9050 based 5V PCI adapter
+ * A PCI9050 bug prevents reading LCR registers if
+ * LCR base address bit 7 is set. Maintain shadow
+ * value so we can write to LCR misc control reg.
+ */
+ info->misc_ctrl_value = 0x087e4546;
+ info->hw_version = 0;
+ }

mgsl_add_device(info);




-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:36    [W:0.033 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site