lkml.org 
[lkml]   [2003]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH[[2.5][9-11] correct the i2c address of the saa7111
Hello,

this patch corrects the i2c address from "34>>1" to 0x24 and 0x25.
Believe me -- or look at the data sheet, for example from
http://www.gdv.uni-hannover.de/~hunold1/linux/saa7146/specs/saa7111a.pdf

Page 41 says: "Slave address read = 49H or 4BH; note 2 write = 48H or 4AH"

They use 8-bit addresses here, but i2c addresses are 7-bit, ie. 0x48>>1
== 0x24 and 0x4a>>1 = 0x25

Please apply.

Thanks
Michael Hunold.










diff -uNrwB -x '*.o' --new-file linux-2.5.69/drivers/media/video/saa7111.c linux-2.5.69.patch/drivers/media/video/saa7111.c
--- linux-2.5.69/drivers/media/video/saa7111.c 2003-05-06 13:16:21.000000000 +0200
+++ linux-2.5.69.patch/drivers/media/video/saa7111.c 2003-05-06 17:18:27.000000000 +0200
@@ -57,7 +57,7 @@
int sat;
};

-static unsigned short normal_i2c[] = { 34>>1, I2C_CLIENT_END };
+static unsigned short normal_i2c[] = { 0x24, 0x25, I2C_CLIENT_END };
static unsigned short normal_i2c_range[] = { I2C_CLIENT_END };

I2C_CLIENT_INSMOD;
\
 
 \ /
  Last update: 2005-03-22 13:35    [W:0.031 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site