Messages in this thread | | | Date | Sat, 31 May 2003 18:23:37 +0200 | From | Carl-Daniel Hailfinger <> | Subject | Re: Any experience with Promise PDC20376 and SATA RAID? |
| |
Reid Spencer wrote: > I think the kernel doesn't know about the device number (105a:3376 = > PDC20376) since it isn't in the kernel's drivers/pci/pci.ids file > (latest device is 7275 PDC20277)and it doesn't recognize the device when > it processes the IDE devices at boot up. All I get is: > > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > VP_IDE: IDE controller at PCI slot 00:11.1 > VP_IDE: chipset revision 6 > VP_IDE: not 100% native mode: will probe irqs later > VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1 > ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:pio > hda: WDC WD400AB-32BVA0, ATA DISK drive > blk: queue c03c58e0, I/O limit 4095Mb (mask 0xffffffff) > hdc: ATAPI 52X CDROM, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > hda: attached ide-disk driver. > hda: host protected area => 1 > hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, > UDMA(100) > ide-floppy driver 0.99.newide > Partition check: > hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 > > ide-floppy driver 0.99.newide > > Note that ide2 isn't found even though I specifically gave the ports for > it on the "append line" of the boot. I don't know enough about the > IDE/PDC support to be able to add support for this new PDC20376 chip. > > Anyone out there done this? > > Reid. >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |