Messages in this thread | | | Date | Fri, 04 Apr 2003 10:50:59 -0800 | From | Antonio Hernandez <> | Subject | Changing the device between usb printers |
| |
Changing the device between usb printers.
I have several usb printers, each have a device to work /dev/usb/lp0.../dev/usb/lp1/...etc. an example for the problem. If I turn off 2 printers, printer #1 (/dev/usb/lp0)and printer #2 (/dev/usb/lp1) if i turn on first printer#2 and later printer #1 I got for printer#2 to /dev/usb/lp0 and printer #1 (/dev/usb/lp1), if the printers are the same is not a problem but if the printers aren't the same then exist a problem when I send to print. I put a dmesg in console and I got messages from "hub.c" that it put the number of bus3/3/1 for a printer and bus3/3/2 to another but "printer.c" put always usblp0 for the first printer detected and usblp1 to another. I think that "printer.c" must to follow the same idea that hub.c to use like /dev/usb/bus/3/3/2/lp or something like that
I have a Mandrake 9.0 distribution, I try with the kernel 2.4.20 and 2.4.21-pre6 too, all have the same problem
Thank you
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |