Messages in this thread | ![/](/images/icornerl.gif) | | Subject | RE: Promise TX4 100: neither IDE port enabled | Date | Fri, 4 Apr 2003 12:56:02 +0200 | From | "Jonathan Vardy" <> |
| |
I've rebooted using the orignal Red Hat kernel (2.4.20) and it recongnizes the Promise card. Here are the details:
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:04.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio PDC20270: IDE controller at PCI slot 02:01.0 PDC20270: chipset revision 2 PDC20270: not 100% native mode: will probe irqs later ide2: BM-DMA at 0x9040-0x9047, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x9048-0x904f, BIOS settings: hdg:pio, hdh:pio ide4: BM-DMA at 0x90c0-0x90c7, BIOS settings: hdi:pio, hdj:pio ide5: BM-DMA at 0x90c8-0x90cf, BIOS settings: hdk:pio, hdl:pio hda: Maxtor 2B020H1, ATA DISK drive blk: queue c0453420, I/O limit 4095Mb (mask 0xffffffff) hdc: WDC WD1200BB-00CAA1, ATA DISK drive blk: queue c04538a0, I/O limit 4095Mb (mask 0xffffffff) hde: WDC WD1200BB-60CJA1, ATA DISK drive blk: queue c0453d20, I/O limit 4095Mb (mask 0xffffffff) hdg: WDC WD1200BB-60CJA1, ATA DISK drive blk: queue c04541a0, I/O limit 4095Mb (mask 0xffffffff) hdi: WDC WD1200BB-60CJA1, ATA DISK drive blk: queue c0454620, I/O limit 4095Mb (mask 0xffffffff) hdk: WDC WD1200BB-60CJA1, ATA DISK drive blk: queue c0454aa0, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0x9000-0x9007,0x9012 on irq 19 ide3 at 0x9020-0x9027,0x9032 on irq 19 ide4 at 0x9080-0x9087,0x9092 on irq 19 ide5 at 0x90a0-0x90a7,0x90b2 on irq 19 hda: host protected area => 1 hda: 39062500 sectors (20000 MB) w/2048KiB Cache, CHS=2431/255/63, UDMA(33) hdc: host protected area => 1 hdc: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=232581/16/63, UDMA(33) hde: host protected area => 1 hde: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=232581/16/63, UDMA(100) hdg: host protected area => 1 hdg: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=232581/16/63, UDMA(100) hdi: host protected area => 1 hdi: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=232581/16/63, UDMA(100) hdk: host protected area => 1 hdk: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=232581/16/63, UDMA(100)
Better results but doen anybody know why 2.4.21pre6 can't detect it right?
> > ide: Assuming 33MHz system bus speed for PIO modes; override > with idebus=xx > PIIX4: IDE controller at PCI slot 00:04.1 > PIIX4: chipset revision 1 > PIIX4: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio > PDC20270: IDE controller at PCI slot 02:01.0 > PDC20270: chipset revision 2 > PDC20270: not 100% native mode: will probe irqs later > PDC20270: neither IDE port enabled (BIOS) > PDC20270: neither IDE port enabled (BIOS) > hda: Maxtor 2B020H1, ATA DISK drive > blk: queue c0395860, I/O limit 4095Mb (mask 0xffffffff) > hdc: WDC WD1200BB-00CAA1, ATA DISK drive > blk: queue c0395cd0, I/O limit 4095Mb (mask 0xffffffff) > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > hda: host protected area => 1 > hda: 39062500 sectors (20000 MB) w/2048KiB Cache, > CHS=2431/255/63, UDMA(33) > hdc: host protected area => 1 > hdc: 234441648 sectors (120034 MB) w/2048KiB Cache, > CHS=232581/16/63, UDMA(33)
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| ![\](/images/icornerr.gif) |