lkml.org 
[lkml]   [2003]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[2.5.68-mm1] APM suspend/resume doesn't work properly

Hi

I tried 2.5.68-mm1 last night and found that after one suspend/resume cycle the
3c574_cs PCMCIA ethernet card didn't work. The only weirdness in the logs is
Apr 21 17:57:47 flat kernel: eth0: command 0x5800 did not complete!
Apr 21 17:58:18 flat last message repeated 1376 times
which appeared after resuming. Once the card was ejected/reinserted the card
worked fine.

After that the machine would not go into suspend state. 2.5.66-mm3 worked fine.
Didn't try suspend in 2.5.67-mm4.

On the plus side, the 3c574_cs driver fixes seem to work.

Sony Vaio, Celeron 333, Pre-empt, APM, 3c574_cs, Debian sid.

Charlie
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:34    [W:0.019 / U:1.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site