Messages in this thread | | | Subject | [2.5.66-mm1][SCSI-Query] aic7\x\x\x parity errors. | From | Ian Kumlien <> | Date | 30 Mar 2003 01:20:00 +0100 |
| |
Hi all,
I wanted to test 2.5 kernels, but i have to say that i have no clue about the current status of the drivers that use.
I checked dmesg to see what info it gave me and it just pushes loads of error messages as seen below.... The only thing i have on that scsi interface is two cdroms (one of which is a cd writer).
Is this known? Any information you guys want/need?
lspci: 00:0b.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
driver: CONFIG_SCSI_AIC7XXX=y
driver options: CONFIG_AIC7XXX_CMDS_PER_DEVICE=8 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 CONFIG_AIC7XXX_DEBUG_ENABLE=y (shouldn't print all this data if it wasn't important imho.) CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
dmesg is filled with: scsi0: PCI error Interrupt at seqaddr = 0x7 scsi0: Data Parity Error Detected during address or write data phase scsi0: PCI error Interrupt at seqaddr = 0x9 scsi0: Data Parity Error Detected during address or write data phase
CC since i don't think i could handle subscribing to this ml =)
-- Ian Kumlien <pomac@vapor.com> [unhandled content-type:application/pgp-signature] | |