lkml.org 
[lkml]   [2003]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: lm sensors sysfs file structure
* Jean Delvare <khali@linux-fr.org> [2003-03-27 14:31:40 +0100]:
> > Ah, and I don't want to do small corrections like 1 or 2 percent up or
> > or down, but things like this for lm80:
> > compute in0 (24/14.7 + 1) * @ , @ / (24/14.7 + 1)
> > compute in2 (22.1/30 + 1) * @ , @ / (22.1/30 + 1)
> > compute in3 (2.8/1.9) * @, @ * 1.9/2.8
> > compute in4 (160/30.1 + 1) * @, @ / (160/30.1 + 1)
> >
> > These differ a lot. And as stated in the sensors.conf seem to be from
> > the datasheet of the lm80 and not mainboard specific.
>
> They may be mainboard specific. The formulae rely on *suggested*
> resistor values, which the integrators may or may not follow. There
> definitely is a need for userspace conversion. Libsensors needs to be
> tunable by the user.
>
> I don't know about the kernel conversion Jan is talking about (never
> coded a sensor driver myself), so I can't talk about this half, but I'm
> pretty sure you shouldn't even think of moving all conversions into
> kernel space.
>
> Mark, Phil, maybe you could explain the reasons better than I would?

I'm not the Mark to which Jean refers, but anyway... he is correct.
The sensor chip cannot read temperatures directly, only voltage. The
conversion from degress C to V is dependent on the mainboard for the
reasons Jean mentions.

But also, the chip driver cannot read voltage directly, only bits in a
register. *That* conversion is *not* mainboard dependent; it is
sensor chip specific.

Even when the subject in question is voltage (e.g. power supply +12V),
there is mainboard dependent nonsense between the "real value" and what
is presented at the pin of the sensor chip.

So there is a legitimate need for two conversions. IMHO, the
mainboard dependent one *must* be done in userspace (as Jean says).
But the conversion of raw register values to volts should happen in
the kernel; fixed point maths are sufficient for that.

(Yes I'm simplifying; external sensors can present data to sensors
chips in other electrical formats, e.g. PWM. Same argument applies.)

Regards,

--
Mark M. Hoffman
mhoffman@lightlink.com

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:34    [W:0.035 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site