Messages in this thread | ![/](/images/icornerl.gif) | | Date | Sat, 22 Mar 2003 15:03:37 +0100 | From | Dominik Brodowski <> | Subject | 2.5.65-ac2 -- hda/ide trouble on ICH4 |
| |
Hi Alan,
unfortunately 2.5.65-ac2 does not boot:
ICH4: IDE controller at PCI slot 00:1f.1 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ... hda: ICH35L080AVVA07-0, ATA DISK driver ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ... hda: host protected area => 1 hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=159560/16/63, UDMA(100) hda: [PTBL] [10011/255/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
and *deadlock*...
in plain 2.5.65 I was seeing strange error messages like:
Mar 19 20:29:55 mondschein kernel: hda: dma_timer_expiry: dma status == 0x24 Mar 19 20:29:55 mondschein kernel: hda: lost interrupt Mar 19 20:29:55 mondschein kernel: hda: dma_intr: bad DMA status (dma_stat=30) Mar 19 20:29:55 mondschein kernel: hda: dma_intr: status=0x52 { DriveReady SeekComplete Index } Mar 19 20:29:55 mondschein kernel:
which are not repeatable when I switch back to 2.5.62.
lspci: 00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 11) 00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 11) 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01) 00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01) 00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01) 00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 81) 00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 01) 00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01) 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE] 02:03.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) 02:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
parts of dmesg in 2.5.62: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 00:1f.1 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hda: IC35L080AVVA07-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM drive hdd: HL-DT-ST GCE-8480B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=159560/16/63, UDMA(100) hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
Dominik - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| ![\](/images/icornerr.gif) |