lkml.org 
[lkml]   [2003]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] 2.5.63 many are called but none are choosen.
From
Date
The past tense of choose is chose, not choosed.
The past participle of choose is chosen, not choosen.

This patch replaces the following:

choosed -> chose
choosen -> chosen

This was diffed against the 2.5 tree as it was this morning.

Steven

arch/mips/Makefile | 2 +-
arch/sparc64/kernel/head.S | 2 +-
arch/sparc64/kernel/trampoline.S | 2 +-
drivers/char/epca.c | 2 +-
drivers/char/rio/riotty.c | 2 +-
drivers/media/video/zr36067.c | 2 +-
drivers/net/bonding.c | 2 +-
drivers/scsi/ncr53c8xx.c | 2 +-
drivers/usb/media/pwc-ctrl.c | 2 +-
include/asm-mips/rrm.h | 2 +-
include/asm-mips/siginfo.h | 2 +-
include/asm-mips64/rrm.h | 2 +-
include/asm-mips64/siginfo.h | 2 +-
net/ipv4/fib_semantics.c | 2 +-
net/sched/sch_red.c | 2 +-
net/unix/af_unix.c | 2 +-
sound/core/pcm_lib.c | 2 +-
sound/pci/cmipci.c | 2 +-
18 files changed, 18 insertions(+), 18 deletions(-)

diff -ur 2.5-current/arch/mips/Makefile linux/arch/mips/Makefile
--- 2.5-current/arch/mips/Makefile Wed Feb 26 08:45:06 2003
+++ linux/arch/mips/Makefile Wed Feb 26 08:51:53 2003
@@ -251,7 +251,7 @@
#
# Choosing incompatible machines durings configuration will result in
# error messages during linking. Select a default linkscript if
-# none has been choosen above.
+# none has been chosen above.
#

AFLAGS_vmlinux.lds.o := -DLOADADDR=$(LOADADDR)
diff -ur 2.5-current/arch/sparc64/kernel/head.S linux/arch/sparc64/kernel/head.S
--- 2.5-current/arch/sparc64/kernel/head.S Wed Feb 26 08:45:23 2003
+++ linux/arch/sparc64/kernel/head.S Wed Feb 26 08:51:53 2003
@@ -84,7 +84,7 @@
nop

cheetah_plus_boot:
- /* Preserve OBP choosen DCU and DCR register settings. */
+ /* Preserve OBP chosen DCU and DCR register settings. */
ba,pt %xcc, cheetah_generic_boot
nop

diff -ur 2.5-current/arch/sparc64/kernel/trampoline.S linux/arch/sparc64/kernel/trampoline.S
--- 2.5-current/arch/sparc64/kernel/trampoline.S Wed Feb 26 08:45:23 2003
+++ linux/arch/sparc64/kernel/trampoline.S Wed Feb 26 08:51:53 2003
@@ -40,7 +40,7 @@
nop

cheetah_plus_startup:
- /* Preserve OBP choosen DCU and DCR register settings. */
+ /* Preserve OBP chosen DCU and DCR register settings. */
ba,pt %xcc, cheetah_generic_startup
nop

diff -ur 2.5-current/drivers/char/epca.c linux/drivers/char/epca.c
--- 2.5-current/drivers/char/epca.c Wed Feb 26 08:45:33 2003
+++ linux/drivers/char/epca.c Wed Feb 26 08:51:53 2003
@@ -1660,7 +1660,7 @@

/* -----------------------------------------------------------------
Note : If lilo was used to configure the driver and the
- ignore epcaconfig option was choosen (digiepca=2) then
+ ignore epcaconfig option was chosen (digiepca=2) then
nbdevs and num_cards will equal 0 at this point. This is
okay; PCI cards will still be picked up if detected.
--------------------------------------------------------------------- */
diff -ur 2.5-current/drivers/char/rio/riotty.c linux/drivers/char/rio/riotty.c
--- 2.5-current/drivers/char/rio/riotty.c Wed Feb 26 08:45:23 2003
+++ linux/drivers/char/rio/riotty.c Wed Feb 26 08:51:53 2003
@@ -233,7 +233,7 @@
}

/*
- ** If the RTA has not booted yet and the user has choosen to block
+ ** If the RTA has not booted yet and the user has chosen to block
** until the RTA is present then we must spin here waiting for
** the RTA to boot.
*/
diff -ur 2.5-current/drivers/media/video/zr36067.c linux/drivers/media/video/zr36067.c
--- 2.5-current/drivers/media/video/zr36067.c Wed Feb 26 08:45:59 2003
+++ linux/drivers/media/video/zr36067.c Wed Feb 26 08:51:53 2003
@@ -4079,7 +4079,7 @@

/* Enforce reasonable lower and upper limits */
if (br.count < 4)
- br.count = 4; /* Could be choosen smaller */
+ br.count = 4; /* Could be chosen smaller */
if (br.count > BUZ_MAX_FRAME)
br.count = BUZ_MAX_FRAME;
br.size = PAGE_ALIGN(br.size);
diff -ur 2.5-current/drivers/net/bonding.c linux/drivers/net/bonding.c
--- 2.5-current/drivers/net/bonding.c Wed Feb 26 08:45:55 2003
+++ linux/drivers/net/bonding.c Wed Feb 26 08:51:53 2003
@@ -1248,7 +1248,7 @@

/* Choose a new valid interface from the pool, set it active
* and make it the current slave. If no valid interface is
- * found, the oldest slave in BACK state is choosen and
+ * found, the oldest slave in BACK state is chosen and
* activated. If none is found, it's considered as no
* interfaces left so the current slave is set to NULL.
* The result is a pointer to the current slave.
diff -ur 2.5-current/drivers/scsi/ncr53c8xx.c linux/drivers/scsi/ncr53c8xx.c
--- 2.5-current/drivers/scsi/ncr53c8xx.c Wed Feb 26 08:45:20 2003
+++ linux/drivers/scsi/ncr53c8xx.c Wed Feb 26 08:51:53 2003
@@ -854,7 +854,7 @@
** The first four bytes (scr_st[4]) are used inside the script by
** "COPY" commands.
** Because source and destination must have the same alignment
-** in a DWORD, the fields HAVE to be at the choosen offsets.
+** in a DWORD, the fields HAVE to be at the chosen offsets.
** xerr_st 0 (0x34) scratcha
** sync_st 1 (0x05) sxfer
** wide_st 3 (0x03) scntl3
diff -ur 2.5-current/drivers/usb/media/pwc-ctrl.c linux/drivers/usb/media/pwc-ctrl.c
--- 2.5-current/drivers/usb/media/pwc-ctrl.c Wed Feb 26 08:45:57 2003
+++ linux/drivers/usb/media/pwc-ctrl.c Wed Feb 26 08:51:53 2003
@@ -129,7 +129,7 @@
4 compression modi: none, low, medium, high

When an uncompressed mode is not available, the next available compressed mode
- will be choosen (unless the decompressor is absent). Sometimes there are only
+ will be chosen (unless the decompressor is absent). Sometimes there are only
1 or 2 compressed modes available; in that case entries are duplicated.
*/
struct Timon_table_entry
diff -ur 2.5-current/include/asm-mips/rrm.h linux/include/asm-mips/rrm.h
--- 2.5-current/include/asm-mips/rrm.h Wed Feb 26 08:45:10 2003
+++ linux/include/asm-mips/rrm.h Wed Feb 26 08:53:40 2003
@@ -3,7 +3,7 @@
*
* written by Miguel de Icaza (miguel@nuclecu.unam.mx)
*
- * Ok, even if SGI choosed to do mmap trough ioctls, their
+ * Ok, even if SGI chose to do mmap trough ioctls, their
* kernel support for virtualizing the graphics card is nice.
*
* We should be able to make graphic applications on Linux
diff -ur 2.5-current/include/asm-mips/siginfo.h linux/include/asm-mips/siginfo.h
--- 2.5-current/include/asm-mips/siginfo.h Wed Feb 26 08:45:31 2003
+++ linux/include/asm-mips/siginfo.h Wed Feb 26 08:51:53 2003
@@ -82,7 +82,7 @@

/*
* si_code values
- * Again these have been choosen to be IRIX compatible.
+ * Again these have been chosen to be IRIX compatible.
*/
#undef SI_ASYNCIO
#undef SI_TIMER
diff -ur 2.5-current/include/asm-mips64/rrm.h linux/include/asm-mips64/rrm.h
--- 2.5-current/include/asm-mips64/rrm.h Wed Feb 26 08:45:52 2003
+++ linux/include/asm-mips64/rrm.h Wed Feb 26 08:53:40 2003
@@ -3,7 +3,7 @@
*
* written by Miguel de Icaza (miguel@nuclecu.unam.mx)
*
- * Ok, even if SGI choosed to do mmap trough ioctls, their
+ * Ok, even if SGI chose to do mmap trough ioctls, their
* kernel support for virtualizing the graphics card is nice.
*
* We should be able to make graphic applications on Linux
diff -ur 2.5-current/include/asm-mips64/siginfo.h linux/include/asm-mips64/siginfo.h
--- 2.5-current/include/asm-mips64/siginfo.h Wed Feb 26 08:45:49 2003
+++ linux/include/asm-mips64/siginfo.h Wed Feb 26 08:51:53 2003
@@ -83,7 +83,7 @@

/*
* si_code values
- * Again these have been choosen to be IRIX compatible.
+ * Again these have been chosen to be IRIX compatible.
*/
#undef SI_ASYNCIO
#undef SI_TIMER
diff -ur 2.5-current/net/ipv4/fib_semantics.c linux/net/ipv4/fib_semantics.c
--- 2.5-current/net/ipv4/fib_semantics.c Wed Feb 26 08:45:10 2003
+++ linux/net/ipv4/fib_semantics.c Wed Feb 26 08:53:40 2003
@@ -317,7 +317,7 @@
Attempt to reconcile all of these (alas, self-contradictory) conditions
results in pretty ugly and hairy code with obscure logic.

- I choosed to generalized it instead, so that the size
+ I chose to generalized it instead, so that the size
of code does not increase practically, but it becomes
much more general.
Every prefix is assigned a "scope" value: "host" is local address,
diff -ur 2.5-current/net/sched/sch_red.c linux/net/sched/sch_red.c
--- 2.5-current/net/sched/sch_red.c Wed Feb 26 08:45:59 2003
+++ linux/net/sched/sch_red.c Wed Feb 26 08:51:53 2003
@@ -61,7 +61,7 @@

avg = (1-W)*avg + W*current_queue_len,

- W is the filter time constant (choosen as 2^(-Wlog)), it controls
+ W is the filter time constant (chosen as 2^(-Wlog)), it controls
the inertia of the algorithm. To allow larger bursts, W should be
decreased.

diff -ur 2.5-current/net/unix/af_unix.c linux/net/unix/af_unix.c
--- 2.5-current/net/unix/af_unix.c Wed Feb 26 08:45:34 2003
+++ linux/net/unix/af_unix.c Wed Feb 26 08:53:40 2003
@@ -1485,7 +1485,7 @@
- do not return fds - good, but too simple 8)
- return fds, and do not return them on read (old strategy,
apparently wrong)
- - clone fds (I choosed it for now, it is the most universal
+ - clone fds (I chose it for now, it is the most universal
solution)

POSIX 1003.1g does not actually define this clearly
diff -ur 2.5-current/sound/core/pcm_lib.c linux/sound/core/pcm_lib.c
--- 2.5-current/sound/core/pcm_lib.c Wed Feb 26 08:45:24 2003
+++ linux/sound/core/pcm_lib.c Wed Feb 26 08:51:53 2003
@@ -1711,7 +1711,7 @@
* snd_pcm_hw_param_choose
*
* Choose one configuration from configuration space defined by PARAMS
- * The configuration choosen is that obtained fixing in this order:
+ * The configuration chosen is that obtained fixing in this order:
* first access, first format, first subformat, min channels,
* min rate, min period time, max buffer size, min tick time
*/
diff -ur 2.5-current/sound/pci/cmipci.c linux/sound/pci/cmipci.c
--- 2.5-current/sound/pci/cmipci.c Wed Feb 26 08:45:08 2003
+++ linux/sound/pci/cmipci.c Wed Feb 26 08:51:53 2003
@@ -617,7 +617,7 @@

/*
* Program pll register bits, I assume that the 8 registers 0xf8 upto 0xff
- * are mapped onto the 8 ADC/DAC sampling frequency which can be choosen
+ * are mapped onto the 8 ADC/DAC sampling frequency which can be chosen
* at the register CM_REG_FUNCTRL1 (0x04).
* Problem: other ways are also possible (any information about that?)
*/


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:33    [W:0.050 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site