lkml.org 
[lkml]   [2003]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject760MPX freezes with ohci-module
Hello,

I'm wondering what is wrong with my system: It is an ASUS-M266D,
(760MPX-chipset, 768 Northbridge, 762 southbridge) that comes with a USB
2.0-NEC card, but it has an USB 1.1 onboard controller. I'm using a single
AthlonXP processor.

The distribution I'm using is SuSE 8.0, but I have installed the Marcelo
2.4.20 kernel and later the Marcelo 2.4.21-pre4 kernel with no success.

As soon as I load the ohci-module for the onboard controller the system
freezes. (there was in an earlier versions a hw-bug in the chipset, but
as far as I know my chipset has a newer revision, where this has been
fixed). This also happens, if I unload first the Ehci-module for the
USB2.0-card.

I also tried Knoppix 3.1 and it only boots, if I switch off the
usb-probing on the boot-prompt, otherwise it also freezes.

If I load the standard kernel that comes with the Suse-distribution 8.0
the usb-port works. What is wrong? If you need further information please
ask.

I looked at the log-files, but did not find any message related to the
crash.

I'm not on the mailing list, so if you have any hint, please CC also to
me.

Thanks a lot.

Klaus

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:33    [W:0.151 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site