Messages in this thread | ![/](/images/icornerl.gif) | | Date | Sat, 06 Dec 2003 14:19:28 +0000 | From | Dan Creswell <> | Subject | i8042 problem on -test11 |
| |
Hi,
I have a problem during boot with -test11 concerning keyboard/mouse. This problem doesn't occur on -test9.
In -test11, whilst it boots okay, the keyboard and mouse are not active at the console. The problem appears to be related to:
mice: PS/2 mouse device common for all mice i8042.c: Can't read CTR while initializing i8042.
One more thing, if anyone has the time, I'd be interested to hear what you think about the APIC configuration being detected. Linux appears to think there are 3 APICs whilst lspci shows only 2:
00:00.0 Host bridge: Intel Corp. E7505 Memory Controller Hub (rev 03) 00:00.1 Class ff00: Intel Corp. E7000 Series RAS Controller (rev 03) 00:01.0 PCI bridge: Intel Corp. E7000 Series Processor to AGP Controller (rev 03) 00:02.0 PCI bridge: Intel Corp. E7000 Series Hub Interface B PCI-to-PCI Bridge (rev 03) 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 02) 00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02) 00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 02) 00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 82) 00:1f.0 ISA bridge: Intel Corp. 82801DB LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corp. 82801DB Ultra ATA Storage Controller (rev 02)00:1f.3 SMBus: Intel Corp. 82801DB/DBM SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) 02:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) 02:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) 02:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) 02:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) 03:03.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07) 03:03.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07) 05:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 05:03.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02)
Is this a problem?
Cheers,
Dan.
Boot output for -test9:
Linux version 2.6.0-test9 (root@rogue.dcrdev.demon.co.uk) (gcc version 3.3.2 20031022 (Red Hat Linux 3.3.2-1)) #22 SMP Tue Nov 18 12:19:11 GMT 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff70000 (usable) BIOS-e820: 000000007ff70000 - 000000007ff7c000 (ACPI data) BIOS-e820: 000000007ff7c000 - 000000007ff80000 (ACPI NVS) BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f6940 hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. hm, page 0009f000 reserved twice. hm, page 000a0000 reserved twice. On node 0 totalpages: 524144 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 294768 pages, LIFO batch:16 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f6880 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x7ff78d20 ACPI: FADT (v001 INTEL PLACER 0x06040000 PTL 0x00000008) @ 0x7ff7bee4 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x7ff7bf58ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7ff7bfd8 ACPI: DSDT (v001 TYAN S2665 0x06040000 MSFT 0x0100000d) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) Processor #6 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x1] trigger[0x1] lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: Product ID: PLACER CRB APIC at: 0xFEE00000 I/O APIC #2 Version 32 at 0xFEC00000. I/O APIC #3 Version 32 at 0xFEC80000. I/O APIC #4 Version 32 at 0xFEC80100. Enabling APIC mode: Flat. Using 3 I/O APICs Processors: 2 Building zonelist for node : 0 Kernel command line: ro root=/dev/sda2 elevator=deadline console=tty0 console=ttyS0,9600n8 nmi_watchdog=1 Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 2666.022 MHz processor. Console: colour VGA+ 80x25 Memory: 2071212k/2096576k available (1818k kernel code, 24224k reserved, 654k data, 436k init, 1179072k highmem) Calibrating delay loop... 5259.26 BogoMIPS Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel(R) Xeon(TM) CPU 2.66GHz stepping 05 per-CPU timeslice cutoff: 1462.56 usecs. task migration cache decay timeout: 2 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/6 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 5324.80 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU#1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Intel(R) Xeon(TM) CPU 2.66GHz stepping 05 Total of 2 processors activated (10584.06 BogoMIPS). WARNING: No sibling found for CPU 0. WARNING: No sibling found for CPU 1. ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. Setting 3 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 3 ... ok. Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. ..TIMER: vector=0x31 pin1=2 pin2=0 activating NMI Watchdog ... done. testing NMI watchdog ... OK. testing the IO APIC....................... .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2665.0581 MHz. ..... host bus clock speed is 133.0279 MHz. checking TSC synchronization across 2 CPUs: passed. Starting migration thread for cpu 0 Bringing up 1 CPU 1 IS NOW UP! Starting migration thread for cpu 1 CPUS done 8 NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfd8d5, last bus=5 PCI: Using configuration type 1 mtrr: v2.0 (20020519) SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX [8086/24c0] at 0000:00:1f.0 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B0,I29,P3) -> 23 PCI->APIC IRQ transform: (B0,I31,P0) -> 17 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B1,I0,P0) -> 17 PCI->APIC IRQ transform: (B3,I3,P0) -> 24 PCI->APIC IRQ transform: (B3,I3,P1) -> 25 PCI->APIC IRQ transform: (B5,I2,P0) -> 17 PCI->APIC IRQ transform: (B5,I3,P0) -> 16 SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x80 Starting balanced_irq ikconfig 0.7 with /proc/config* highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Initializing Cryptographic API pty: 2048 Unix98 ptys configured Real Time Clock Driver v1.12 hw_random hardware driver 1.0.0 loaded Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel E7505 Chipset. agpgart: Maximum main memory to use for agp memory: 1919M agpgart: AGP aperture is 128M @ 0xe0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Using deadline io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 ICH4: chipset revision 2 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x18a0-0x18a7, BIOS settings: hda:DMA, hdb:pio hda: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-floppy driver 0.99.newide GDT: Storage RAID Controller Driver. Version: 2.08 GDT: Found 0 PCI Storage RAID Controllers st: Version 20030811, fixed bufsize 32768, s/g segs 256 Fusion MPT base driver 2.05.00.03 Copyright (c) 1999-2002 LSI Logic Corporation mptbase: Initiating ioc0 bringup ioc0: 53C1030: Capabilities={Initiator} mptbase: Initiating ioc1 bringup ioc1: 53C1030: Capabilities={Initiator} mptbase: 2 MPT adapters found, 2 installed. Fusion MPT SCSI Host driver 2.05.00.03 scsi0 : ioc0: LSI53C1030, FwRev=01000000h, Ports=1, MaxQ=255, IRQ=24 Vendor: SEAGATE Model: ST336607LW Rev: 0006 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sda: 71132960 512-byte hdwr sectors (36420 MB) SCSI device sda: drive cache: write through sda: sda1 sda2 sda3 sda4 < sda5 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 scsi1 : ioc1: LSI53C1030, FwRev=01000000h, Ports=1, MaxQ=255, IRQ=25 Vendor: SEAGATE Model: ST336607LW Rev: 0006 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sdb: 71132960 512-byte hdwr sectors (36420 MB) SCSI device sdb: drive cache: write through sdb: sdb1 sdb2 Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0 Attached scsi generic sg1 at scsi1, channel 0, id 1, lun 0, type 0 mice: PS/2 mouse device common for all mice input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 EISA: Probing bus 0 at eisa0 NET: Registered protocol family 2 IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 524288 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 436k freed INIT: version 2.85 booting
Boot output for -test11:
Linux version 2.6.0-test11 (root@rogue.dcrdev.demon.co.uk) (gcc version 3.3.2 20031022 (Red Hat Linux 3.3.2-1)) #1 SMP Sat Dec 6 13:08:11 GMT 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff70000 (usable) BIOS-e820: 000000007ff70000 - 000000007ff7c000 (ACPI data) BIOS-e820: 000000007ff7c000 - 000000007ff80000 (ACPI NVS) BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f6940 hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. hm, page 0009f000 reserved twice. hm, page 000a0000 reserved twice. On node 0 totalpages: 524144 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 294768 pages, LIFO batch:16 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f6880 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x7ff78d20 ACPI: FADT (v001 INTEL PLACER 0x06040000 PTL 0x00000008) @ 0x7ff7bee4 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x7ff7bf58ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7ff7bfd8 ACPI: DSDT (v001 TYAN S2665 0x06040000 MSFT 0x0100000d) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) Processor #6 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x1] trigger[0x1] lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: Product ID: PLACER CRB APIC at: 0xFEE00000 I/O APIC #2 Version 32 at 0xFEC00000. I/O APIC #3 Version 32 at 0xFEC80000. I/O APIC #4 Version 32 at 0xFEC80100. Enabling APIC mode: Flat. Using 3 I/O APICs Processors: 2 Building zonelist for node : 0 Kernel command line: ro root=/dev/sda2 elevator=deadline console=tty0 console=ttyS0,9600n8 nmi_watchdog=1 Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 2667.204 MHz processor. Console: colour VGA+ 80x25 Memory: 2069172k/2096576k available (1821k kernel code, 26264k reserved, 651k data, 436k init, 1179072k highmem) Calibrating delay loop... 5259.26 BogoMIPS Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel(R) Xeon(TM) CPU 2.66GHz stepping 05 per-CPU timeslice cutoff: 1462.58 usecs. task migration cache decay timeout: 2 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/6 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 5324.80 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 6 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU#1: Intel P4/Xeon Extended MCE MSRs (12) available CPU#1: Thermal monitoring enabled CPU1: Intel(R) Xeon(TM) CPU 2.66GHz stepping 05 Total of 2 processors activated (10584.06 BogoMIPS). WARNING: No sibling found for CPU 0. WARNING: No sibling found for CPU 1. ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. Setting 3 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 3 ... ok. Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. ..TIMER: vector=0x31 pin1=2 pin2=0 activating NMI Watchdog ... done. testing NMI watchdog ... OK. testing the IO APIC....................... .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2665.0318 MHz. ..... host bus clock speed is 133.0265 MHz. checking TSC synchronization across 2 CPUs: passed. Starting migration thread for cpu 0 Bringing up 1 CPU 1 IS NOW UP! Starting migration thread for cpu 1 CPUS done 8 NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfd8d5, last bus=5 PCI: Using configuration type 1 mtrr: v2.0 (20020519) SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/24c0] at 0000:00:1f.0 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B0,I29,P3) -> 23 PCI->APIC IRQ transform: (B0,I31,P0) -> 17 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B1,I0,P0) -> 17 PCI->APIC IRQ transform: (B3,I3,P0) -> 24 PCI->APIC IRQ transform: (B3,I3,P1) -> 25 PCI->APIC IRQ transform: (B5,I2,P0) -> 17 PCI->APIC IRQ transform: (B5,I3,P0) -> 16 SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x80 Starting balanced_irq ikconfig 0.7 with /proc/config* highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Initializing Cryptographic API pty: 2048 Unix98 ptys configured Real Time Clock Driver v1.12 hw_random hardware driver 1.0.0 loaded Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel E7505 Chipset. agpgart: Maximum main memory to use for agp memory: 1919M agpgart: AGP aperture is 128M @ 0xe0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Using deadline io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 ICH4: chipset revision 2 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x18a0-0x18a7, BIOS settings: hda:DMA, hdb:pio hda: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-floppy driver 0.99.newide GDT: Storage RAID Controller Driver. Version: 2.08 GDT: Found 0 PCI Storage RAID Controllers st: Version 20030811, fixed bufsize 32768, s/g segs 256 Fusion MPT base driver 2.05.00.03 Copyright (c) 1999-2002 LSI Logic Corporation mptbase: Initiating ioc0 bringup ioc0: 53C1030: Capabilities={Initiator} mptbase: Initiating ioc1 bringup ioc1: 53C1030: Capabilities={Initiator} mptbase: 2 MPT adapters found, 2 installed. Fusion MPT SCSI Host driver 2.05.00.03 scsi0 : ioc0: LSI53C1030, FwRev=01000000h, Ports=1, MaxQ=255, IRQ=24 Vendor: SEAGATE Model: ST336607LW Rev: 0006 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sda: 71132960 512-byte hdwr sectors (36420 MB) SCSI device sda: drive cache: write through sda: sda1 sda2 sda3 sda4 < sda5 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 scsi1 : ioc1: LSI53C1030, FwRev=01000000h, Ports=1, MaxQ=255, IRQ=25 Vendor: SEAGATE Model: ST336607LW Rev: 0006 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sdb: 71132960 512-byte hdwr sectors (36420 MB) SCSI device sdb: drive cache: write through sdb: sdb1 sdb2 Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0 Attached scsi generic sg1 at scsi1, channel 0, id 1, lun 0, type 0 mice: PS/2 mouse device common for all mice i8042.c: Can't read CTR while initializing i8042. md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 EISA: Probing bus 0 at eisa0 NET: Registered protocol family 2 IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 524288 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 436k freed INIT: version 2.85 booting
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| ![\](/images/icornerr.gif) |