Messages in this thread | | | Subject | Sun GigE Fiber Card and 2.4-22 Kernel (please help!!!) | Date | Thu, 4 Dec 2003 13:23:28 -0500 | From | "Badinter, George" <> |
| |
I am running 2.4-22 on x86 with Sun GigE Card. The card seemed to recognized fined and I see it come up. However, it doesn't want to play nice with Cisco 3500XL switch. I have tried several port setting on the switch's port i.e. autoneg off/on duplex full/half and etc. I see link lights, ethtool says that the link is up, but there is no traffic coming through. This brings me to the interesting point, apparently sungem driver was fixed from 2.4-19 to 2.4-22, however ethtool still has no effect on it. No matter, how much I tried to play with it, it will not change any settings on sungem interface. It comes at 100 Full Duplex, autoneg on.
Has anyone able to make this card work under 2.4-22??? Please help!!
Here some outputs:
lspci -vv
00:08.0 Ethernet controller: Sun Microsystems Computer Corp. GEM (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (16000ns min, 16000ns max), cache line size 10 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=2M] Expansion ROM at 40000000 [size=1M] [root@luke root]# lsmod Module Size Used by Not tainted autofs 13748 0 (autoclean) (unused) sungem 27468 1 3c59x 30576 1 iptable_filter 2412 0 (autoclean) (unused) ip_tables 16032 1 [iptable_filter] mousedev 5624 0 (unused) keybdev 2912 0 (unused) input 6080 0 [mousedev keybdev] hid 12380 0 (unused) usb-ohci 21896 0 (unused) usbcore 80960 1 [hid usb-ohci] ext3 73124 3 jbd 56080 3 [ext3] raid0 3848 1
[root@luke root]# ifconfig eth1 eth1 Link encap:Ethernet HWaddr 00:03:BA:16:26:55 inet addr:192.168.0.81 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:4294967251 TX packets:0 errors:0 dropped:0 overruns:0 carrier:4294967281 collisions:4294967266 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:16 Base address:0x5400 [root@luke root]# ethtool eth1 Settings for eth1: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised auto-negotiation: No Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 0 Transceiver: externel Auto-negotiation: on Current message level: 0x00000007 (7) Link detected: yes
Thanks again.
George - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |