lkml.org 
[lkml]   [2003]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectIDE-RAID Drive Performance
Date
Hi!

I think i'm getting really bad values from my disks. It's two Western
Digital WD800JB-00DUA3 (Special Edition 8 MB cache) disks connected to a
Promise TX2000 (PDC20271) card (RAID1 using ataraid under Linux 2.4.23).

The disks are setup with hdparm at boot time:

/sbin/hdparm -X69 -d1 -u1 -m16 -c3 /dev/hda
/sbin/hdparm -X69 -d1 -u1 -m16 -c3 /dev/hdc

When running hdparm -tT I get the following:

/dev/hda:
Timing buffer-cache reads: 128 MB in 1.13 seconds =113.27 MB/sec
Timing buffered disk reads: 64 MB in 2.46 seconds = 26.02 MB/sec

/dev/hdc:
Timing buffer-cache reads: 128 MB in 1.13 seconds =113.27 MB/sec
Timing buffered disk reads: 64 MB in 2.47 seconds = 25.91 MB/sec

Are these normal values? I don't think so. Please advise.

/Nicke


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:59    [W:0.037 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site