Messages in this thread | ![/](/images/icornerl.gif) | | Subject | PROBLEM: 2.6.0-test11 Oops after resuming from sleep/hibernation | From | Naheed Vora <> | Date | Fri, 28 Nov 2003 02:20:28 -0800 |
| |
[1.] One line summary of the problem: Oops after resuming from sleep/hibernation
[2.] Full description of the problem/report:
2.6.0-test11 throws Oops when my laptop resumes after sleep mode or hibernation. I am using APM (compiled in the kernel). I think this has something to do with the wireless card/pcmcia as it happens only when I have my wireless card(Orinoco) connected and on before put to sleep. In absense of wireless card, there is no panic. Just before panic, I see lots of messages scroll up followed by message, Bad Scheduling in Interrupts! and then Panic.
Surprisingly I don't have anything in my syslog/messages. oops written by hand from the terminal.
[3.] Keywords (i.e., modules, networking, kernel): APM, pcmcia, orinoco_cs
[4.] Kernel version (from /proc/version): Linux version 2.6.0-test11 (root@gnubird) (gcc version 3.3.2 (Debian)) #6 Thu Nov 27 01:27:14 PST 2003
[5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt)
Note: ksyms is not the one when Oops was generated but system was rebooted and brought to same state as at the time of Oops.
ksymoops 2.4.9 on i686 2.6.0-test11. Options used -V (default) -k ksyms (specified) -l /proc/modules (default) -o /lib/modules/2.6.0-test11/ (default) -m /boot/System.map-2.6.0-test11 (default)
Warning (read_ksyms): no kernel symbols in ksyms, is ksyms a valid ksyms file? No modules in ksyms, skipping objects No ksyms, skipping lsmod pid:281 com:apmd EIP: 0060:[<c011b740>] Not tainted Using defaults from ksymoops -t elf32-i386 -a i386 EFLAGS: 00000246 eax: 00000000 ebx: c03c6980 ecx: 00000000 edx: 00000000 esi: 0000000b edi: cb9106e0 ebp: 0000000b ds: 007b es: 007b cr0: 8005008b cr2: 4015af98 cr3: 012eb000 cr4: 00000690 Warning (Oops_read): Code line not seen, dumping what data is available
>>EIP; c011b740 <panic+100/120> <=====
>>ebx; c03c6980 <buf.0+0/400> >>edi; cb9106e0 <_end+b532088/3fc1f9a8>
2 warnings issued. Results may not be reliable.
[6.] A small shell script or example program which triggers the problem (if possible)
None
[7.] Environment
Debian (sarge/unstable)
[7.1.] Software (add the output of the ver_linux script here) Linux gnubird 2.6.0-test11 #6 Thu Nov 27 01:27:14 PST 2003 i686 GNU/Linux Gnu C 3.3.2 Gnu make 3.80 util-linux 2.12 mount 2.12 module-init-tools 0.9.15-pre3 e2fsprogs 1.35-WIP pcmcia-cs 3.2.5 PPP 2.4.2b3 nfs-utils 1.0.6 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 3.1.14 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 5.0.91 Modules Loaded orinoco_cs vfat orinoco hermes msdos fat
[7.2.] Processor information (from /proc/cpuinfo): processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 10 cpu MHz : 647.928 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1277.95
[7.3.] Module information (from /proc/modules): orinoco_cs 6472 - - Live 0xccb42000 vfat 12544 - - Live 0xccb45000 orinoco 41580 - - Live 0xcc936000 hermes 7424 - - Live 0xcc919000 msdos 8672 - - Live 0xcc915000 fat 39456 - - Live 0xcc91d000
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) 0000-001f : dma1 0020-0021 : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0100-013f : orinoco_cs 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 0cf8-0cff : PCI conf1 1000-103f : 0000:00:07.3 1040-105f : 0000:00:07.3 1800-183f : 0000:00:03.0 1800-183f : eepro100 1840-1847 : 0000:00:03.1 1850-185f : 0000:00:07.1 1850-1857 : ide0 1858-185f : ide1 1860-187f : 0000:00:07.2 2000-2fff : PCI Bus #01 2000-20ff : 0000:01:00.0 4000-40ff : PCI CardBus #02 4400-44ff : PCI CardBus #02 4800-48ff : PCI CardBus #06 4c00-4cff : PCI CardBus #06
00000000-0009f7ff : System RAM 0009f800-0009ffff : reserved 000a0000-000bffff : Video RAM area 000d0000-000d17ff : Extension ROM 000e0000-000effff : Extension ROM 000f0000-000fffff : System ROM 00100000-0bfeffff : System RAM 00100000-002d6d16 : Kernel code 002d6d17-0038eeff : Kernel data 0bff0000-0bffebff : ACPI Tables 0bffec00-0bffffff : ACPI Non-volatile Storage 10000000-103fffff : PCI CardBus #02 10400000-107fffff : PCI CardBus #02 10800000-10bfffff : PCI CardBus #06 10c00000-10ffffff : PCI CardBus #06 50000000-50000fff : 0000:00:02.0 50000000-50000fff : yenta_socket 50100000-50100fff : 0000:00:02.1 50100000-50100fff : yenta_socket 60000000-60000fff : card services f4000000-f40fffff : 0000:00:05.0 f4100000-f411ffff : 0000:00:03.0 f4120000-f4120fff : 0000:00:03.0 f4120000-f4120fff : eepro100 f4121000-f4121fff : 0000:00:03.1 f4122000-f4122fff : 0000:00:05.0 f4200000-f5ffffff : PCI Bus #01 f4200000-f4200fff : 0000:01:00.0 f5000000-f5ffffff : 0000:01:00.0 f8000000-fbffffff : 0000:00:00.0 fff80000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root) gnubird:/usr/src/linux-2.6.0-test11# lspci -vvv 00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 1.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00002000-00002fff Memory behind bridge: f4200000-f5ffffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03) Subsystem: IBM: Unknown device 0130 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 3 Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 10000000-103ff000 (prefetchable) Memory window 1: 10400000-107ff000 I/O window 0: 00004000-000040ff Memory window 1: 10400000-107ff000 I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03) Subsystem: IBM: Unknown device 0130 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 0x08 (32 bytes) Interrupt: pin B routed to IRQ 5 Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=06, subordinate=09, sec-latency=176 Memory window 0: 10800000-10bff000 (prefetchable) Memory window 1: 10c00000-10fff000 I/O window 0: 00004800-000048ff I/O window 1: 00004c00-00004cff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
00:03.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 09) Subsystem: Intel Corp. EtherExpress PRO/100+ MiniPCI Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 9 Region 0: Memory at f4120000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 1800 [size=64] Region 2: Memory at f4100000 (32-bit, non-prefetchable) [size=128K] Expansion ROM at <unassigned> [disabled] [size=1M] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:03.1 Serial controller: Xircom Mini-PCI V.90 56k Modem (prog-if 02 [16550]) Subsystem: Intel Corp.: Unknown device 2408 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at 1840 [size=8] Region 1: Memory at f4121000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01) Subsystem: IBM: Unknown device 0153 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1000ns min, 6000ns max) Interrupt: pin A routed to IRQ 3 Region 0: Memory at f4122000 (32-bit, non-prefetchable) [size=4K] Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=1M] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 4: I/O ports at 1850 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at 1860 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 9
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) (prog-if 00 [VGA]) Subsystem: IBM ThinkPad A20m Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 3 Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at 2000 [size=256] Region 2: Memory at f4200000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [50] AGP version 1.0 Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [5c] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6.] SCSI information (from /proc/scsi/scsi) None
[7.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant):
gnubird:/usr/src/linux-2.6.0-test11# cat /proc/apm 1.16ac 1.2 0x03 0x01 0x03 0x09 80% -1 ?
[X.] Other notes, patches, fixes, workarounds:
gnubird:/usr/src/linux-2.6.0-test11/scripts# cat /proc/cmdline root=/dev/hda7 acpi=off
Please CC me when replying to the list, Thanks, ---- Naheed Vora
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| ![\](/images/icornerr.gif) |