Messages in this thread | | | From | Rob Landley <> | Subject | Oops on boot with -test10 | Date | Thu, 27 Nov 2003 12:12:28 -0600 |
| |
It oopsed on boot. (Continued and booted up just fine, but gave a call trace and everything.)
Call trace and my .config attached.
Rob
Linux version 2.6.0-test10 (root@localhost.localdomain) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #4 SMP Thu Nov 27 12:01:05 CST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000b7e0000 (usable) BIOS-e820: 000000000b7e0000 - 000000000b7f0000 (reserved) BIOS-e820: 000000000b7f0000 - 000000000b7f8000 (ACPI data) BIOS-e820: 000000000b7f8000 - 000000000b800000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 183MB LOWMEM available. On node 0 totalpages: 47072 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 42976 pages, LIFO batch:10 HighMem zone: 0 pages, LIFO batch:1 DMI not present. ACPI: RSDP (v000 IBM ) @ 0x000eab70 ACPI: RSDT (v001 IBM AXXXXXX4 0x00000001 IBM 0x00000000) @ 0x0b7f0000 ACPI: FADT (v001 IBM AXXXXXX4 0x00000001 IBM 0x00000000) @ 0x0b7f008c ACPI: BOOT (v001 IBM AXXXXXX4 0x00000001 IBM 0x00000000) @ 0x0b7f0030 ACPI: DBGP (v001 IBM AXXXXXX4 0x00000001 IBM 0x00000000) @ 0x0b7f0058 ACPI: DSDT (v001 IBM AXXXXXX4 0x00000001 MSFT 0x0100000c) @ 0x00000000 Building zonelist for node : 0 Kernel command line: ro root=/dev/hda1 Local APIC disabled by BIOS -- reenabling. Could not enable APIC! Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 697.818 MHz processor. Console: colour VGA+ 80x25 Memory: 181372k/188288k available (2537k kernel code, 6296k reserved, 990k data, 168k init, 0k highmem) Calibrating delay loop... 1368.06 BogoMIPS Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 219k freed CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel Celeron (Coppermine) stepping 06 per-CPU timeslice cutoff: 365.89 usecs. task migration cache decay timeout: 1 msecs. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Starting migration thread for cpu 0 CPUS done 8 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20031002 ACPI: IRQ 9 was Edge Triggered, setting to Level Triggerd ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [PILA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [PILB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [PILC] (IRQs 1 3 4 5 *6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [PILD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [PILE] (IRQs 1 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [PILF] (IRQs 1 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [PILG] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [PILH] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [PILI] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 34) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized Linux Kernel Card Services options: [pci] [cardbus] [pm] drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ACPI: PCI Interrupt Link [PILH] enabled at IRQ 11 ACPI: PCI Interrupt Link [PILC] enabled at IRQ 6 ACPI: No IRQ known for interrupt pin A of device 0000:00:10.0 - using IRQ 15 ACPI: PCI Interrupt Link [PILD] enabled at IRQ 10 ACPI: PCI Interrupt Link [PILI] enabled at IRQ 10 ACPI: PCI Interrupt Link [PILA] enabled at IRQ 10 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x80 Machine check exception polling timer started. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). udf: registering filesystem ACPI: AC Adapter [AC] (off-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID] ACPI: Processor [CPU0] (supports C1 C2 C3) ACPI: Thermal Zone [THR2] (62 C) pty: 256 Unix98 ptys configured request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16 lp: driver loaded but no devices found Linux agpgart interface v0.100 (c) Dave Jones [drm:drm_init] *ERROR* Cannot initialize the agpgart module. Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled parport0: PC-style at 0x3bc [PCSPP(,...)] lp0: using parport0 (polling). Using anticipatory io scheduler Floppy drive(s): fd0 is unknown type 12 (usb?) spurious 8259A interrupt: IRQ7. floppy0: no floppy controllers found loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 0000:00:10.0 ACPI: No IRQ known for interrupt pin A of device 0000:00:10.0 - using IRQ 15 ALI15X3: chipset revision 195 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x7050-0x7057, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x7058-0x705f, BIOS settings: hdc:DMA, hdd:pio hda: IBM-DJSA-220, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: UJDA330, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39070080 sectors (20003 MB) w/1874KiB Cache, CHS=38760/16/63, UDMA(33) hda: hda1 hda2 hda3 hdc: ATAPI 24X CD-ROM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 PCI: Enabling device 0000:00:0a.0 (0000 -> 0002) Yenta: CardBus bridge found at 0000:00:0a.0 [12a3:ab01] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ list 0000, PCI irq6 Socket status: 30000011 Yenta: CardBus bridge found at 0000:00:13.0 [1014:01a3] Yenta: ISA IRQ list 0838, PCI irq10 Socket status: 30000821 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... drivers/usb/core/usb.c: registered new driver usb-storage USB Mass Storage support registered. drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC). request_module: failed /sbin/modprobe -- snd-card-0. error = -16 ALSA device list: No soundcards found. NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET: Registered protocol family 1 NET: Registered protocol family 17 PM: Reading pmdisk image. PM: Resume from disk failed. ACPI: (supports S0 S1 S4 S5) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 168k freed EXT3 FS on hda1, internal journal Adding 530136k swap on /dev/hda2. Priority:-1 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x2c8-0x2cf 0x3c0-0x3df 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. orinoco.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others) Linux Kernel Card Services options: [pci] [cardbus] [pm] Unable to handle kernel NULL pointer dereference at virtual address 0000000c printing eip: c0189fd4 *pde = 00000000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[<c0189fd4>] Not tainted EFLAGS: 00010286 EIP is at create_dir+0x12/0xb3 eax: cb2edf30 ebx: cc052874 ecx: 00000000 edx: cc052878 esi: cc052874 edi: 00000000 ebp: cb2edf18 esp: cb2edf00 ds: 007b es: 007b ss: 0068 Process modprobe (pid: 934, threadinfo=cb2ec000 task=cb4c06b0) Stack: cc0527d4 cc0527d4 00000246 cc052874 cc052874 cc052874 cb2edf38 c018a0de cc052874 00000000 cc052878 cb2edf30 00000000 00000000 cb2edf4c c01edab0 cc052874 cc0527c0 cc0527c4 cb2edf70 c01edef1 cc052874 cc052874 cc052864 Call Trace: [<c018a0de>] sysfs_create_dir+0x3f/0x70 [<c01edab0>] create_dir+0x1f/0x49 [<c01edef1>] kobject_add+0x4d/0x126 [<c024da5b>] bus_register+0x5c/0x90 [<cc05d012>] init_pcmcia_bus+0x12/0xa3 [ds] [<c0138c1d>] sys_init_module+0x143/0x272 [<c010a2f5>] sysenter_past_esp+0x52/0x71
Code: 8b 77 0c c7 04 24 0e ed 38 c0 c7 44 24 04 77 00 00 00 8d 5e # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y
# # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_STANDALONE=y
# # General setup # CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_IKCONFIG is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y
# # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y
# # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set CONFIG_MPENTIUM4=y # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y # CONFIG_HPET_TIMER is not set # CONFIG_HPET_EMULATE_RTC is not set CONFIG_SMP=y CONFIG_NR_CPUS=8 # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y CONFIG_X86_MCE_P4THERMAL=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # CONFIG_EDD is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_HAVE_DEC_LOCK=y
# # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_SOFTWARE_SUSPEND is not set CONFIG_PM_DISK=y CONFIG_PM_DISK_PARTITION="/dev/hda2"
# # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_RELAXED_AML is not set
# # APM (Advanced Power Management) BIOS Support # # CONFIG_APM is not set
# # CPU Frequency scaling # CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_PROC_INTF is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_24_API is not set CONFIG_CPU_FREQ_TABLE=y
# # CPUFreq processor drivers # # CONFIG_X86_ACPI_CPUFREQ is not set # CONFIG_X86_POWERNOW_K6 is not set # CONFIG_X86_POWERNOW_K7 is not set # CONFIG_X86_POWERNOW_K8 is not set # CONFIG_X86_GX_SUSPMOD is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set # CONFIG_X86_SPEEDSTEP_ICH is not set # CONFIG_X86_SPEEDSTEP_SMI is not set # CONFIG_X86_P4_CLOCKMOD is not set # CONFIG_X86_LONGRUN is not set # CONFIG_X86_LONGHAUL is not set
# # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set CONFIG_HOTPLUG=y
# # PCMCIA/CardBus support # CONFIG_PCMCIA=y CONFIG_YENTA=y CONFIG_CARDBUS=y # CONFIG_I82092 is not set # CONFIG_I82365 is not set # CONFIG_TCIC is not set CONFIG_PCMCIA_PROBE=y
# # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set
# # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y
# # Device Drivers #
# # Generic Driver Options # # CONFIG_FW_LOADER is not set
# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set
# # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_PC_PCMCIA is not set # CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set
# # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set
# # Protocols # # CONFIG_ISAPNP is not set # CONFIG_PNPBIOS is not set
# # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y CONFIG_LBD=y
# # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y
# # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_TASKFILE_IO=y
# # IDE chipset support/bugfixes # CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_IDEDMA_PCI_WIP is not set CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set CONFIG_BLK_DEV_ALI15X3=y # CONFIG_WDC_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_DMA_NONPCI is not set # CONFIG_BLK_DEV_HD is not set
# # SCSI device support # CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y
# # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y
# # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_REPORT_LUNS=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set
# # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set
# # PCMCIA SCSI adapter support # # CONFIG_PCMCIA_AHA152X is not set # CONFIG_PCMCIA_FDOMAIN is not set # CONFIG_PCMCIA_NINJA_SCSI is not set # CONFIG_PCMCIA_QLOGIC is not set
# # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set
# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set
# # Fusion MPT device support # # CONFIG_FUSION is not set
# # IEEE 1394 (FireWire) support (EXPERIMENTAL) # CONFIG_IEEE1394=y
# # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set # CONFIG_IEEE1394_OUI_DB is not set
# # Device Drivers #
# # Texas Instruments PCILynx requires I2C bit-banging # CONFIG_IEEE1394_OHCI1394=y
# # Protocol Drivers # # CONFIG_IEEE1394_VIDEO1394 is not set # CONFIG_IEEE1394_SBP2 is not set # CONFIG_IEEE1394_ETH1394 is not set # CONFIG_IEEE1394_DV1394 is not set # CONFIG_IEEE1394_RAWIO is not set # CONFIG_IEEE1394_CMP is not set
# # I2O device support # # CONFIG_I2O is not set
# # Networking support # CONFIG_NET=y
# # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_IPV6 is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_NETFILTER is not set
# # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set
# # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set
# # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y
# # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set
# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set
# # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_CS89x0 is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set CONFIG_8139TOO=y # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_NET_POCKET is not set
# # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set
# # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set
# # Wireless LAN (non-hamradio) # CONFIG_NET_RADIO=y
# # Obsolete Wireless cards support (pre-802.11) # # CONFIG_STRIP is not set # CONFIG_ARLAN is not set # CONFIG_WAVELAN is not set # CONFIG_PCMCIA_WAVELAN is not set # CONFIG_PCMCIA_NETWAVE is not set
# # Wireless 802.11 Frequency Hopping cards support # # CONFIG_PCMCIA_RAYCS is not set
# # Wireless 802.11b ISA/PCI cards support # # CONFIG_AIRO is not set CONFIG_HERMES=m # CONFIG_PLX_HERMES is not set # CONFIG_TMD_HERMES is not set # CONFIG_PCI_HERMES is not set
# # Wireless 802.11b Pcmcia/Cardbus cards support # CONFIG_PCMCIA_HERMES=m CONFIG_AIRO_CS=m # CONFIG_PCMCIA_ATMEL is not set # CONFIG_PCMCIA_WL3501 is not set CONFIG_NET_WIRELESS=y
# # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set
# # Wan interfaces # # CONFIG_WAN is not set
# # PCMCIA network device support # CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_3C574=m CONFIG_PCMCIA_FMVJ18X=m CONFIG_PCMCIA_PCNET=m CONFIG_PCMCIA_NMCLAN=m CONFIG_PCMCIA_SMC91C92=m CONFIG_PCMCIA_XIRC2PS=m CONFIG_PCMCIA_AXNET=m
# # Amateur Radio support # # CONFIG_HAMRADIO is not set
# # IrDA (infrared) support # # CONFIG_IRDA is not set
# # Bluetooth support # # CONFIG_BT is not set
# # ISDN subsystem # # CONFIG_ISDN_BOOL is not set
# # Telephony Support # # CONFIG_PHONE is not set
# # Input device support # CONFIG_INPUT=y
# # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set
# # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set
# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_PS2_SYNAPTICS is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_UINPUT is not set
# # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set
# # Serial drivers # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_CONSOLE is not set # CONFIG_SERIAL_8250_CS is not set # CONFIG_SERIAL_8250_ACPI is not set CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set
# # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set
# # I2C support # # CONFIG_I2C is not set
# # I2C Algorithms #
# # I2C Hardware Bus support #
# # I2C Hardware Sensors Chip support # # CONFIG_I2C_SENSOR is not set
# # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_QIC02_TAPE is not set
# # IPMI # # CONFIG_IPMI_HANDLER is not set
# # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set
# # Ftape, the floppy tape device driver # CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set CONFIG_AGP_INTEL=y # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_VIA is not set CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_GAMMA is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_RADEON is not set # CONFIG_DRM_I810 is not set CONFIG_DRM_I830=y # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set
# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set
# # Multimedia devices # # CONFIG_VIDEO_DEV is not set
# # Digital Video Broadcasting Devices # # CONFIG_DVB is not set
# # Graphics support # # CONFIG_FB is not set # CONFIG_VIDEO_SELECT is not set
# # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y
# # Sound # CONFIG_SOUND=y
# # Advanced Linux Sound Architecture # CONFIG_SND=y CONFIG_SND_SEQUENCER=y # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set
# # Generic devices # # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set
# # ISA devices # # CONFIG_SND_AD1848 is not set # CONFIG_SND_CS4231 is not set # CONFIG_SND_CS4232 is not set # CONFIG_SND_CS4236 is not set # CONFIG_SND_ES1688 is not set # CONFIG_SND_ES18XX is not set # CONFIG_SND_GUSCLASSIC is not set # CONFIG_SND_GUSEXTREME is not set # CONFIG_SND_GUSMAX is not set # CONFIG_SND_INTERWAVE is not set # CONFIG_SND_INTERWAVE_STB is not set # CONFIG_SND_OPTI92X_AD1848 is not set # CONFIG_SND_OPTI92X_CS4231 is not set # CONFIG_SND_OPTI93X is not set # CONFIG_SND_SB8 is not set # CONFIG_SND_SB16 is not set # CONFIG_SND_SBAWE is not set # CONFIG_SND_WAVEFRONT is not set # CONFIG_SND_CMI8330 is not set # CONFIG_SND_OPL3SA2 is not set # CONFIG_SND_SGALAXY is not set # CONFIG_SND_SSCAPE is not set
# # PCI devices # # CONFIG_SND_ALI5451 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set CONFIG_SND_INTEL8X0=y # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VX222 is not set
# # ALSA USB devices # # CONFIG_SND_USB_AUDIO is not set
# # PCMCIA devices # # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_VXP440 is not set
# # Open Sound System # # CONFIG_SOUND_PRIME is not set
# # USB support # CONFIG_USB=y # CONFIG_USB_DEBUG is not set
# # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set
# # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y
# # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set
# # USB Human Interface Devices (HID) # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_XPAD is not set
# # USB Imaging devices # # CONFIG_USB_MDC800 is not set CONFIG_USB_SCANNER=m # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set
# # USB Multimedia devices # # CONFIG_USB_DABUSB is not set
# # Video4Linux support is needed for USB Multimedia device support #
# # USB Network adaptors # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set
# # USB port drivers # # CONFIG_USB_USS720 is not set
# # USB Serial Converter support # # CONFIG_USB_SERIAL is not set
# # USB Miscellaneous drivers # # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_BRLVGER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_TEST is not set # CONFIG_USB_GADGET is not set
# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y
# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=y
# # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y # CONFIG_NTFS_FS is not set
# # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y # CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS=y # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y
# # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set
# # Network File Systems # CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_TCP is not set CONFIG_LOCKD=y CONFIG_EXPORTFS=y CONFIG_SUNRPC=y # CONFIG_SUNRPC_GSS is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set
# # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y
# # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set
# # Profiling support # # CONFIG_PROFILING is not set
# # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_FRAME_POINTER=y CONFIG_X86_EXTRA_IRQS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y
# # Security options # # CONFIG_SECURITY is not set
# # Cryptographic options # # CONFIG_CRYPTO is not set
# # Library routines # CONFIG_CRC32=y CONFIG_X86_SMP=y CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y
| |