Messages in this thread | | | From | Bartlomiej Pater <> | Subject | problems with usb storage and nforce2 board | Date | Wed, 12 Nov 2003 20:06:52 +0100 |
| |
Hello
I have recently changed mainboard for SIS735-based to nForce2-based (asus a7n8x-x if that matters). Since then I've been experiencing problems using my datafab KCCF-USBG CF reader. It means it does not work at all - it is detected by kernel but mounting the partition causes lock of the mount process and timeout messages until the reader is unplugged.
The reader itself is functional - works with any other mainboard I have access to, including USB2.0 one based on Intel 845G chipset. The mainboards usb ports are also working as I've managed to configure my digital camera to work. Both camera and CF reader are usb1.1 devices but turning BIOS into USB 1.1 mode changes nothing.
I've tried all the latest kernels available including 2.4.23-rc1 and 2.6.0-test9 with no success. I know that Datafab devices are tricky and often caused problems in the past, but is there anything that could make it work? I don't have Windows at home so I couldn't test how it behaves on it.
Because both syslog and kernel config are quite big files I've placed them on WWW. USB and USB-storage were compiled with full debug. Here are the URLs:
http://zachod.com/~noster/kernel-config http://zachod.com/~noster/syslog-usb20
If there anything I could do to help in solving this thing I am ready :)
regards, nst; - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |