Messages in this thread | | | Subject | 2.6.0-test9-mjb2 oops | Date | Wed, 12 Nov 2003 00:06:31 +0000 (GMT) | From | Bryce as root <> |
| |
This is from -mjb2 which basically tweaks some bits around numa et al however,.. it mihgt be of intrest to somebody (Waves to mbligh)
HW: HP 8way box
Thoughts anyone? flames and dribble to /dev/no_one_cares
Phil =--=
<NON working kernel bootlog>
Linux version 2.6.0-test9-mjb2 (root@ca-test16-RHEL3) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-20)) #4 SMP Tue Nov 11 14:16:12 PST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000efff0000 (usable) BIOS-e820: 00000000efff0000 - 00000000f0000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000080ffff000 (usable) Warning only 896MB will be used. Use a PAE enabled kernel. 896MB LOWMEM available. found SMP MP-table at 000f4fd0 hm, page 000f4000 reserved twice. hm, page 000f5000 reserved twice. hm, page 000fb000 reserved twice. hm, page 000fc000 reserved twice. On node 0 totalpages: 229376 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 HP ) @ 0x000f4f70 ACPI: RSDT (v001 HP P47 0x00000001 0x00000000) @ 0xefff0000 ACPI: FADT (v001 HP P47 0x00000001 0x00000000) @ 0xefff0040 ACPI: MADT (v001 HP P47 0x00000001 0x00000000) @ 0xefff0100 ACPI: SRAT (v001 HP P47 0x00000003 0x00000000) @ 0xefff01e0 ACPI: SPCR (v001 HP SPCRRBSU 0x00000001 0x00000000) @ 0xefff0450 ACPI: DSDT (v001 HP P47 0x00000001 MSFT 0x0100000b) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) Processor #4 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) Processor #6 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x08] enabled) Processor #8 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled) Processor #10 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0c] enabled) Processor #12 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0e] enabled) Processor #14 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x07] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x09] disabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0b] disabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0d] disabled) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] polarity[0x0] trigger[0x0] lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000 I/O APIC #8 Version 17 at 0xFEC00000. I/O APIC #9 Version 17 at 0xFEC01000. I/O APIC #10 Version 17 at 0xFEC02000. Enabling APIC mode: Summit. Using 3 I/O APICs Processors: 8 Building zonelist for node : 0 Kernel command line: ro root=/dev/cciss/c0d0p5 console=ttyS0,115200 console=tty0 Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 2000.595 MHz processor. Console: colour VGA+ 80x25 Memory: 901740k/917504k available (2133k kernel code, 14996k reserved, 911k data, 156k init, 0k highmem) Calibrating delay loop... 3923.96 BogoMIPS Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 2184k freed CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 per-CPU timeslice cutoff: 1462.76 usecs. task migration cache decay timeout: 2 msecs. enabled ExtINT on CPU#0 Leaving ESR disabled. Booting processor 1/2 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 Leaving ESR disabled. Calibrating delay loop... 3989.50 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU#1: Intel P4/Xeon Extended MCE MSRs (12) available CPU#1: Thermal monitoring enabled CPU1: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 2/4 eip 2000 Initializing CPU#2 masked ExtINT on CPU#2 Leaving ESR disabled. Calibrating delay loop... 3989.50 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU#2: Intel P4/Xeon Extended MCE MSRs (12) available CPU#2: Thermal monitoring enabled CPU2: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 3/6 eip 2000 Initializing CPU#3 masked ExtINT on CPU#3 Leaving ESR disabled. Calibrating delay loop... 3989.50 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU#3: Intel P4/Xeon Extended MCE MSRs (12) available CPU#3: Thermal monitoring enabled CPU3: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 4/8 eip 2000 Initializing CPU#4 ------------[ cut here ]------------ kernel BUG at /usr/src/linux-2.6.0-test9/include/asm-i386/mach-summit/mach_apic.h:63! invalid operand: 0000 [#1] CPU: 4 EIP: 0060:[<c040647a>] Not tainted EFLAGS: 00010002 EIP is at setup_local_APIC+0x190/0x19d eax: 00000000 ebx: 00000004 ecx: ffffffff edx: 00000000 esi: 00000000 edi: 00000014 ebp: f7f93f98 esp: f7f93f80 ds: 007b es: 007b ss: 0068 Process swapper (pid: 0, threadinfo=f7f92000 task=f7dce080) Stack: c0377000 00000018 00000004 00000004 00000000 00000000 f7f93fb4 c04048fa f7dce3c0 c03f0000 0801080c 00000000 0801080c f7f93fc0 c0404990 00000000 f7f93fbc c1937f50 c0120ccd 0000000a 00000400 c032bba8 c1937f60 00000000 Call Trace: [<c04048fa>] smp_callin+0x73/0xf4 [<c0404990>] start_secondary+0x15/0x95 [<c0120ccd>] printk+0x162/0x195 [<c04011cd>] print_cpu_info+0x8d/0xda
Code: 0f 0b 3f 00 60 a0 32 c0 e9 df fe ff ff 55 89 e5 e8 21 d2 de <0>Kernel panic: Attempted to kill the idle task! In idle task - not syncing Stuck ?? CPU #8 not responding - cannot use it. Booting processor 4/10 eip 2000 Initializing CPU#4 ------------[ cut here ]------------ kernel BUG at /usr/src/linux-2.6.0-test9/include/asm-i386/mach-summit/mach_apic.h:63! invalid operand: 0000 [#2] CPU: 4 EIP: 0060:[<c040647a>] Not tainted EFLAGS: 00010002 EIP is at setup_local_APIC+0x190/0x19d eax: 00000000 ebx: 00000004 ecx: ffffffff edx: 00000000 esi: 00000000 edi: 00000014 ebp: f7f8ff98 esp: f7f8ff80 ds: 007b es: 007b ss: 0068 Process swapper (pid: 0, threadinfo=f7f8e000 task=f7f91980) Stack: c0377000 00000018 00000004 00000004 00000000 00000000 f7f8ffb4 c04048fa f7f91cc0 c03f0000 0a01080c 00000000 0a01080c f7f8ffc0 c0404990 00000000 f7f8ffbc c1937f54 c0120a33 0000213c 0000213c ffffffff ffffffff 00000000 Call Trace: [<c04048fa>] smp_callin+0x73/0xf4 [<c0404990>] start_secondary+0x15/0x95 [<c0120a33>] call_console_drivers+0x77/0x13c
Code: 0f 0b 3f 00 60 a0 32 c0 e9 df fe ff ff 55 89 e5 e8 21 d2 de <0>Kernel panic: Attempted to kill the idle task! In idle task - not syncing Stuck ?? CPU #10 not responding - cannot use it. Booting processor 4/12 eip 2000 Initializing CPU#4 ------------[ cut here ]------------ kernel BUG at /usr/src/linux-2.6.0-test9/include/asm-i386/mach-summit/mach_apic.h:63! invalid operand: 0000 [#3] CPU: 4 EIP: 0060:[<c040647a>] Not tainted EFLAGS: 00010002 EIP is at setup_local_APIC+0x190/0x19d eax: 00000000 ebx: 00000004 ecx: ffffffff edx: 00000000 esi: 00000000 edi: 00000014 ebp: f7f8df98 esp: f7f8df80 ds: 007b es: 007b ss: 0068 Process swapper (pid: 0, threadinfo=f7f8c000 task=f7f91340) Stack: c0377000 00000018 00000004 00000004 00000000 00000000 f7f8dfb4 c04048fa f7f91680 c03f0000 0c01080c 00000000 0c01080c f7f8dfc0 c0404990 00000000 f7f8dfbc c1937f54 c0120a33 000025ce 000025ce ffffffff ffffffff 00000000 Call Trace: [<c04048fa>] smp_callin+0x73/0xf4 [<c0404990>] start_secondary+0x15/0x95 [<c0120a33>] call_console_drivers+0x77/0x13c
Code: 0f 0b 3f 00 60 a0 32 c0 e9 df fe ff ff 55 89 e5 e8 21 d2 de <0>Kernel panic: Attempted to kill the idle task! In idle task - not syncing Stuck ?? CPU #12 not responding - cannot use it. Booting processor 4/14 eip 2000 Initializing CPU#4 ------------[ cut here ]------------ kernel BUG at /usr/src/linux-2.6.0-test9/include/asm-i386/mach-summit/mach_apic.h:63! invalid operand: 0000 [#4] CPU: 4 EIP: 0060:[<c040647a>] Not tainted EFLAGS: 00010002 EIP is at setup_local_APIC+0x190/0x19d eax: 00000000 ebx: 00000004 ecx: ffffffff edx: 00000000 esi: 00000000 edi: 00000014 ebp: f7f8bf98 esp: f7f8bf80 ds: 007b es: 007b ss: 0068 Process swapper (pid: 0, threadinfo=f7f8a000 task=f7f90d00) Stack: c0377000 00000018 00000004 00000004 00000000 00000000 f7f8bfb4 c04048fa f7f91040 c03f0000 0e01080c 00000000 0e01080c f7f8bfc0 c0404990 00000000 f7f8bfbc c1937f54 c0120a33 00002a60 00002a60 ffffffff ffffffff 00000000 Call Trace: [<c04048fa>] smp_callin+0x73/0xf4 [<c0404990>] start_secondary+0x15/0x95 [<c0120a33>] call_console_drivers+0x77/0x13c
Code: 0f 0b 3f 00 60 a0 32 c0 e9 df fe ff ff 55 89 e5 e8 21 d2 de <0>Kernel panic: Attempted to kill the idle task! In idle task - not syncing Stuck ?? CPU #14 not responding - cannot use it. Total of 4 processors activated (15892.48 BogoMIPS). ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 8-0, 8-3, 8-5, 8-7, 8-11, 9-0, 10-0, 10-1, 10-2, 10-8, 10-9, 10-10 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 52. number of IO-APIC #8 registers: 16. number of IO-APIC #9 registers: 16. number of IO-APIC #10 registers: 16. testing the IO APIC....................... IO APIC #8...... .... register #00: 08000000 ....... : physical APIC id: 08 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 08000000 ....... : arbitration: 08 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 0FF 0F 0 0 0 0 0 1 0 39 02 0FF 0F 0 0 0 0 0 1 0 31 03 000 00 1 0 0 0 0 0 0 00 04 0FF 0F 0 0 0 0 0 1 0 41 05 000 00 1 0 0 0 0 0 0 00 06 0FF 0F 0 0 0 0 0 1 0 49 07 000 00 1 0 0 0 0 0 0 00 08 0FF 0F 0 0 0 0 0 1 0 51 09 0FF 0F 1 1 0 1 0 1 0 59 0a 0FF 0F 1 1 0 1 0 1 0 61 0b 000 00 1 0 0 0 0 0 0 00 0c 0FF 0F 0 0 0 0 0 1 0 69 0d 0FF 0F 1 1 0 1 0 1 0 71 0e 0FF 0F 0 0 0 0 0 1 0 79 0f 0FF 0F 0 0 0 0 0 1 0 81 IO APIC #9...... .... register #00: 09000000 ....... : physical APIC id: 09 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 09000000 ....... : arbitration: 09 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 0FF 0F 1 1 0 1 0 1 0 89 02 0FF 0F 1 1 0 1 0 1 0 91 03 0FF 0F 1 1 0 1 0 1 0 99 04 0FF 0F 1 1 0 1 0 1 0 A1 05 0FF 0F 1 1 0 1 0 1 0 A9 06 0FF 0F 1 1 0 1 0 1 0 B1 07 0FF 0F 1 1 0 1 0 1 0 B9 08 0FF 0F 1 1 0 1 0 1 0 C1 09 0FF 0F 1 1 0 1 0 1 0 C9 0a 0FF 0F 1 1 0 1 0 1 0 61 0b 0FF 0F 1 1 0 1 0 1 0 D1 0c 0FF 0F 1 1 0 1 0 1 0 D9 0d 0FF 0F 1 1 0 1 0 1 0 E1 0e 0FF 0F 1 1 0 1 0 1 0 E9 0f 0FF 0F 1 1 0 1 0 1 0 32 IO APIC #10...... .... register #00: 0A000000 ....... : physical APIC id: 0A ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 0A000000 ....... : arbitration: 0A .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 0FF 0F 1 1 0 1 0 1 0 3A 04 0FF 0F 1 1 0 1 0 1 0 42 05 0FF 0F 1 1 0 1 0 1 0 4A 06 0FF 0F 1 1 0 1 0 1 0 52 07 0FF 0F 1 1 0 1 0 1 0 5A 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 0FF 0F 1 1 0 1 0 1 0 62 0c 0FF 0F 1 1 0 1 0 1 0 6A 0d 0FF 0F 1 1 0 1 0 1 0 72 0e 0FF 0F 1 1 0 1 0 1 0 7A 0f 0FF 0F 1 1 0 1 0 1 0 82 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ17 -> 1:1 IRQ18 -> 1:2 IRQ19 -> 1:3 IRQ20 -> 1:4 IRQ21 -> 1:5 IRQ22 -> 1:6 IRQ23 -> 1:7 IRQ24 -> 1:8 IRQ25 -> 1:9 IRQ26 -> 0:10-> 1:10 IRQ27 -> 1:11 IRQ28 -> 1:12 IRQ29 -> 1:13 IRQ30 -> 1:14 IRQ31 -> 1:15 IRQ35 -> 2:3 IRQ36 -> 2:4 IRQ37 -> 2:5 IRQ38 -> 2:6 IRQ39 -> 2:7 IRQ43 -> 2:11 IRQ44 -> 2:12 IRQ45 -> 2:13 IRQ46 -> 2:14 IRQ47 -> 2:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1998.0852 MHz. ..... host bus clock speed is 99.0942 MHz. checking TSC synchronization across 4 CPUs: BIOS BUG: CPU#3 improperly initialized, has 2 usecs TSC skew! FIXED. Starting migration thread for cpu 0 Bringing up 1 CPU 1 IS NOW UP! Starting migration thread for cpu 1 Bringing up 2 CPU 2 IS NOW UP! Starting migration thread for cpu 2 Bringing up 3 CPU 3 IS NOW UP! Starting migration thread for cpu 3 CPUS done 8 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf1186, last bus=14 PCI: Using configuration type 1 mtrr: v2.0 (20020519) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized usb.c: registered new driver usbfs usb.c: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1 PCI: Discovered peer bus 01 PCI: Discovered peer bus 02 PCI: Discovered peer bus 03 PCI: Discovered peer bus 07 PCI: Discovered peer bus 0b PCI->APIC IRQ transform: (B0,I3,P0) -> 45 PCI->APIC IRQ transform: (B0,I12,P0) -> 47 PCI->APIC IRQ transform: (B0,I12,P1) -> 46 PCI->APIC IRQ transform: (B0,I15,P0) -> 26 PCI->APIC IRQ transform: (B0,I16,P0) -> 39 PCI->APIC IRQ transform: (B0,I16,P1) -> 38 PCI->APIC IRQ transform: (B0,I16,P2) -> 37 PCI->APIC IRQ transform: (B1,I4,P0) -> 44 PCI->APIC IRQ transform: (B1,I5,P0) -> 43 PCI->APIC IRQ transform: (B2,I14,P0) -> 19 PCI->APIC IRQ transform: (B3,I1,P0) -> 23 PCI->APIC IRQ transform: (B3,I2,P0) -> 21 PCI->APIC IRQ transform: (B3,I30,P0) -> 18 PCI->APIC IRQ transform: (B7,I2,P0) -> 29 PCI->APIC IRQ transform: (B7,I2,P1) -> 28 PCI->APIC IRQ transform: (B7,I30,P0) -> 17 PCI->APIC IRQ transform: (B11,I1,P0) -> 27 PCI->APIC IRQ transform: (B11,I2,P0) -> 25 PCI->APIC IRQ transform: (B11,I30,P0) -> 17 PCI: Device 00:78 not found by BIOS PCI: Device 00:7b not found by BIOS PCI: Device 00:88 not found by BIOS PCI: Device 00:89 not found by BIOS PCI: Device 00:90 not found by BIOS PCI: Device 00:91 not found by BIOS PCI: Device 00:98 not found by BIOS PCI: Device 00:99 not found by BIOS PCI: Device 00:a0 not found by BIOS PCI: Device 00:a1 not found by BIOS PCI: Device 00:a8 not found by BIOS PCI: Device 00:a9 not found by BIOS PCI: Device 00:b0 not found by BIOS PCI: Device 00:b1 not found by BIOS PCI: Device 00:b8 not found by BIOS PCI: Device 00:c0 not found by BIOS PCI: Device 00:c2 not found by BIOS PCI: Device 00:c4 not found by BIOS PCI: Device 00:c6 not found by BIOS PCI: Device 00:c8 not found by BIOS PCI: Device 00:ca not found by BIOS Machine check exception polling timer started. Starting balanced_irq ikconfig 0.7 with /proc/config* Installing knfsd (copyright (C) 1996 okir@monad.swb.de). udf: registering filesystem pty: 256 Unix98 ptys configured request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16 lp: driver loaded but no devices found Linux agpgart interface v0.100 (c) Dave Jones [drm:drm_init] *ERROR* Cannot initialize the agpgart module. Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M reset set in interrupt, calling c0241ec8 floppy0: no floppy controllers found Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1 SvrWks CSB5: chipset revision 147 SvrWks CSB5: not 100% native mode: will probe irqs later SvrWks CSB5: simplex device: DMA forced ide0: BM-DMA at 0x2820-0x2827, BIOS settings: hda:pio, hdb:pio SvrWks CSB5: simplex device: DMA forced ide1: BM-DMA at 0x2828-0x282f, BIOS settings: hdc:pio, hdd:pio hda: Compaq DVD-ROM DV28EB 01, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 24X DVD-ROM drive, 256kB Cache Uniform CD-ROM driver Revision: 3.12 uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 usb.c: registered new driver usblp usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. usb.c: registered new driver hid hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 VFS: Cannot open root device "cciss/c0d0p5" or unknown-block(0,0) Please append a correct "root=" boot option Kernel panic: VFS: Unable to mount root fs on unknown-block(0,0) Linux version 2.6.0-test9-mjb2 (root@ca-test16-RHEL3) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-20)) #4 SMP Tue Nov 11 14:16:12 PST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000efff0000 (usable) BIOS-e820: 00000000efff0000 - 00000000f0000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000080ffff000 (usable) Warning only 896MB will be used. Use a PAE enabled kernel. 896MB LOWMEM available. found SMP MP-table at 000f4fd0 hm, page 000f4000 reserved twice. hm, page 000f5000 reserved twice. hm, page 000fb000 reserved twice. hm, page 000fc000 reserved twice. On node 0 totalpages: 229376 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 HP ) @ 0x000f4f70 ACPI: RSDT (v001 HP P47 0x00000001 0x00000000) @ 0xefff0000 ACPI: FADT (v001 HP P47 0x00000001 0x00000000) @ 0xefff0040 ACPI: MADT (v001 HP P47 0x00000001 0x00000000) @ 0xefff0100 ACPI: SRAT (v001 HP P47 0x00000003 0x00000000) @ 0xefff01e0 ACPI: SPCR (v001 HP SPCRRBSU 0x00000001 0x00000000) @ 0xefff0450 ACPI: DSDT (v001 HP P47 0x00000001 MSFT 0x0100000b) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) Processor #4 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) Processor #6 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x08] enabled) Processor #8 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled) Processor #10 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0c] enabled) Processor #12 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0e] enabled) Processor #14 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x07] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x09] disabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0b] disabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0d] disabled) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] polarity[0x0] trigger[0x0] lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000 I/O APIC #8 Version 17 at 0xFEC00000. I/O APIC #9 Version 17 at 0xFEC01000. I/O APIC #10 Version 17 at 0xFEC02000. Enabling APIC mode: Summit. Using 3 I/O APICs Processors: 8 Building zonelist for node : 0 Kernel command line: ro root=/dev/cciss/c0d0p5 console=ttyS0,115200 console=tty0 Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 2000.139 MHz processor. Console: colour VGA+ 80x25 Memory: 901740k/917504k available (2133k kernel code, 14996k reserved, 911k data, 156k init, 0k highmem) Calibrating delay loop... 3923.96 BogoMIPS Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 2184k freed CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 per-CPU timeslice cutoff: 1462.76 usecs. task migration cache decay timeout: 2 msecs. enabled ExtINT on CPU#0 Leaving ESR disabled. Booting processor 1/2 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 Leaving ESR disabled. Calibrating delay loop... 3981.31 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU#1: Intel P4/Xeon Extended MCE MSRs (12) available CPU#1: Thermal monitoring enabled CPU1: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 2/4 eip 2000 Initializing CPU#2 masked ExtINT on CPU#2 Leaving ESR disabled. Calibrating delay loop... 3989.50 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU#2: Intel P4/Xeon Extended MCE MSRs (12) available CPU#2: Thermal monitoring enabled CPU2: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 3/6 eip 2000 Initializing CPU#3 masked ExtINT on CPU#3 Leaving ESR disabled. Calibrating delay loop... 3989.50 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU#3: Intel P4/Xeon Extended MCE MSRs (12) available CPU#3: Thermal monitoring enabled CPU3: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 4/8 eip 2000 Initializing CPU#4 ------------[ cut here ]------------ kernel BUG at /usr/src/linux-2.6.0-test9/include/asm-i386/mach-summit/mach_apic.h:63! invalid operand: 0000 [#1] CPU: 4 EIP: 0060:[<c040647a>] Not tainted EFLAGS: 00010002 EIP is at setup_local_APIC+0x190/0x19d eax: 00000000 ebx: 00000004 ecx: ffffffff edx: 00000000 esi: 00000000 edi: 00000014 ebp: f7f93f98 esp: f7f93f80 ds: 007b es: 007b ss: 0068 Process swapper (pid: 0, threadinfo=f7f92000 task=f7dce080) Stack: c0377000 00000018 00000004 00000004 00000000 00000000 f7f93fb4 c04048fa f7dce3c0 c03f0000 0801080c 00000000 0801080c f7f93fc0 c0404990 00000000 f7f93fbc c1937f50 c0120ccd 0000000a 00000400 c032bba8 c1937f60 00000000 Call Trace: [<c04048fa>] smp_callin+0x73/0xf4 [<c0404990>] start_secondary+0x15/0x95 [<c0120ccd>] printk+0x162/0x195 [<c04011cd>] print_cpu_info+0x8d/0xda
Code: 0f 0b 3f 00 60 a0 32 c0 e9 df fe ff ff 55 89 e5 e8 21 d2 de <0>Kernel panic: Attempted to kill the idle task! In idle task - not syncing Stuck ?? CPU #8 not responding - cannot use it. Booting processor 4/10 eip 2000
<A working kernel bootlog>
Linux version 2.4.21-3.ELhugemem (bhcompile@porky.devel.redhat.com) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-20)) #1 SMP Fri Sep 19 13:57:07 EDT 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000efff0000 (usable) BIOS-e820: 00000000efff0000 - 00000000f0000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000080ffff000 (usable) 29087MB HIGHMEM available. 3936MB LOWMEM available. found SMP MP-table at 000f4fd0 hm, page 000f4000 reserved twice. hm, page 000f5000 reserved twice. hm, page 000fb000 reserved twice. hm, page 000fc000 reserved twice. On node 0 totalpages: 8454143 zone(0): 4096 pages. zone(1): 1003520 pages. zone(2): 7446527 pages. ACPI: Searched entire block, no RSDP was found. ACPI: RSDP located at physical address 020f4f70 RSD PTR v0 [HP ] __va_range(0xefff0000, 0x68): idx=33 mapped at fffdd000 ACPI table found: RSDT v1 [HP P47 0.1] __va_range(0xefff0040, 0x24): idx=33 mapped at fffdd000 __va_range(0xefff0040, 0x74): idx=33 mapped at fffdd000 ACPI table found: FACP v1 [HP P47 0.1] __va_range(0xefff0100, 0x24): idx=33 mapped at fffdd000 __va_range(0xefff0100, 0xe0): idx=33 mapped at fffdd000 ACPI table found: APIC v1 [HP P47 0.1] __va_range(0xefff0100, 0xe0): idx=33 mapped at fffdd000 LAPIC (acpi_id[0x0001] id[0x0] enabled[1]) CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version 20
LAPIC (acpi_id[0x0002] id[0x2] enabled[1]) CPU 1 (0x0200) enabledProcessor #2 Pentium 4(tm) XEON(tm) APIC version 20
LAPIC (acpi_id[0x0003] id[0x4] enabled[1]) CPU 2 (0x0400) enabledProcessor #4 Pentium 4(tm) XEON(tm) APIC version 20
LAPIC (acpi_id[0x0004] id[0x6] enabled[1]) CPU 3 (0x0600) enabledProcessor #6 Pentium 4(tm) XEON(tm) APIC version 20
LAPIC (acpi_id[0x0005] id[0x8] enabled[1]) CPU 4 (0x0800) enabledProcessor #8 Pentium 4(tm) XEON(tm) APIC version 20
LAPIC (acpi_id[0x0006] id[0xa] enabled[1]) CPU 5 (0x0a00) enabledProcessor #10 Pentium 4(tm) XEON(tm) APIC version 20
LAPIC (acpi_id[0x0007] id[0xc] enabled[1]) CPU 6 (0x0c00) enabledProcessor #12 Pentium 4(tm) XEON(tm) APIC version 20
LAPIC (acpi_id[0x0008] id[0xe] enabled[1]) CPU 7 (0x0e00) enabledProcessor #14 Pentium 4(tm) XEON(tm) APIC version 20
LAPIC (acpi_id[0x0009] id[0x1] enabled[0]) CPU 8 (0x0100) disabled LAPIC (acpi_id[0x000a] id[0x3] enabled[0]) CPU 9 (0x0300) disabled LAPIC (acpi_id[0x000b] id[0x5] enabled[0]) CPU 10 (0x0500) disabled LAPIC (acpi_id[0x000c] id[0x7] enabled[0]) CPU 11 (0x0700) disabled LAPIC (acpi_id[0x000d] id[0x9] enabled[0]) CPU 12 (0x0900) disabled LAPIC (acpi_id[0x000e] id[0xb] enabled[0]) CPU 13 (0x0b00) disabled LAPIC (acpi_id[0x000f] id[0xd] enabled[0]) CPU 14 (0x0d00) disabled LAPIC (acpi_id[0x0010] id[0xf] enabled[0]) CPU 15 (0x0f00) disabled IOAPIC (id[0x8] address[0xfec00000] global_irq_base[0x0]) IOAPIC (id[0x9] address[0xfec01000] global_irq_base[0x10]) IOAPIC (id[0xa] address[0xfec02000] global_irq_base[0x20]) INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1] trigger[0x1]) LAPIC_NMI (acpi_id[0x00ff] polarity[0x0] trigger[0x0] lint[0x1]) 16 CPUs total Local APIC address fee00000 __va_range(0xefff01e0, 0x24): idx=33 mapped at fffdd000 __va_range(0xefff01e0, 0x270): idx=33 mapped at fffdd000 ACPI table found: SRAT v1 [HP P47 0.3] __va_range(0xefff0450, 0x24): idx=33 mapped at fffdd000 __va_range(0xefff0450, 0x50): idx=33 mapped at fffdd000 ACPI table found: SPCR v1 [HP SPCRRBSU 0.1] __va_range(0xefff8000, 0x24): idx=33 mapped at fffdd000 __va_range(0xefff8000, 0x4fae): idx=33 mapped at fffdd000 ACPI table found: SSDT v1 [HP P47 0.2] Enabling the CPU's according to the ACPI table Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000 I/O APIC #8 Version 17 at 0xFEC00000. I/O APIC #9 Version 17 at 0xFEC01000. I/O APIC #10 Version 17 at 0xFEC02000. Processors: 8 xAPIC support is present Enabling APIC mode: Flat. Using 3 I/O APICs Kernel command line: ro root=/dev/cciss/c0d0p5 console=ttyS0,115200 console=tty0 mapped 4G/4G trampoline to fffd7000. Initializing CPU#0 Detected 1999.332 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3984.58 BogoMIPS Memory: 33047436k/33816572k available (1676k kernel code, 502316k reserved, 1306k data, 224k init, 29622268k highmem) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1048576 (order: 10, 4194304 bytes) Page-cache hash table entries: 1048576 (order: 10, 4194304 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Hyper-Threading is disabled Intel machine check reporting enabled on CPU#0. CPU0: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 per-CPU timeslice cutoff: 1462.74 usecs. task migration cache decay timeout: 10 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/2 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Hyper-Threading is disabled Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 2/4 eip 2000 Initializing CPU#2 masked ExtINT on CPU#2 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Hyper-Threading is disabled Intel machine check reporting enabled on CPU#2. CPU2: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 3/6 eip 2000 Initializing CPU#3 masked ExtINT on CPU#3 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Hyper-Threading is disabled Intel machine check reporting enabled on CPU#3. CPU3: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 4/8 eip 2000 Initializing CPU#4 masked ExtINT on CPU#4 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Hyper-Threading is disabled Intel machine check reporting enabled on CPU#4. CPU4: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 5/10 eip 2000 Initializing CPU#5 masked ExtINT on CPU#5 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Hyper-Threading is disabled Intel machine check reporting enabled on CPU#5. CPU5: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 6/12 eip 2000 Initializing CPU#6 masked ExtINT on CPU#6 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Hyper-Threading is disabled Intel machine check reporting enabled on CPU#6. CPU6: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Booting processor 7/14 eip 2000 Initializing CPU#7 masked ExtINT on CPU#7 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: L3 cache: 2048K CPU: Hyper-Threading is disabled Intel machine check reporting enabled on CPU#7. CPU7: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 Total of 8 processors activated (31968.46 BogoMIPS). ENABLING IO-APIC IRQs Setting 8 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 8 ... ok. Setting 9 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 9 ... ok. Setting 10 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 10 ... ok. ..TIMER: vector=0x31 pin1=2 pin2=0 testing the IO APIC.......................
.................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1999.3996 MHz. ..... host bus clock speed is 99.9697 MHz. cpu: 0, clocks: 999697, slice: 111077 CPU0<T0:999696,T1:888608,D:11,S:111077,C:999697> cpu: 1, clocks: 999697, slice: 111077 cpu: 2, clocks: 999697, slice: 111077 cpu: 3, clocks: 999697, slice: 111077 cpu: 4, clocks: 999697, slice: 111077 cpu: 5, clocks: 999697, slice: 111077 cpu: 6, clocks: 999697, slice: 111077 cpu: 7, clocks: 999697, slice: 111077 CPU2<T0:999696,T1:666464,D:1,S:111077,C:999697> CPU3<T0:999696,T1:555376,D:12,S:111077,C:999697> CPU4<T0:999696,T1:444304,D:7,S:111077,C:999697> CPU1<T0:999696,T1:777536,D:6,S:111077,C:999697> CPU5<T0:999696,T1:333232,D:2,S:111077,C:999697> CPU7<T0:999696,T1:111072,D:8,S:111077,C:999697> CPU6<T0:999696,T1:222144,D:13,S:111077,C:999697> zapping low mappings. Process timing init...done. Starting migration thread for cpu 0 Starting migration thread for cpu 1 Starting migration thread for cpu 2 Starting migration thread for cpu 3 Starting migration thread for cpu 4 Starting migration thread for cpu 5 Starting migration thread for cpu 6 Starting migration thread for cpu 7 PCI: PCI BIOS revision 2.10 entry at 0xf1186, last bus=14 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Ignoring BAR0-3 of IDE controller 00:0f.1 PCI: Discovered primary peer bus 01 [IRQ] PCI: Discovered primary peer bus 02 [IRQ] PCI: Discovered primary peer bus 03 [IRQ] PCI: Discovered primary peer bus 07 [IRQ] PCI: Discovered primary peer bus 0b [IRQ] PCI->APIC IRQ transform: (B0,I3,P0) -> 45 PCI->APIC IRQ transform: (B0,I12,P0) -> 47 PCI->APIC IRQ transform: (B0,I12,P1) -> 46 PCI->APIC IRQ transform: (B0,I15,P0) -> 10 PCI->APIC IRQ transform: (B0,I16,P0) -> 39 PCI->APIC IRQ transform: (B0,I16,P1) -> 38 PCI->APIC IRQ transform: (B0,I16,P2) -> 37 PCI->APIC IRQ transform: (B1,I4,P0) -> 44 PCI->APIC IRQ transform: (B1,I5,P0) -> 43 PCI->APIC IRQ transform: (B2,I14,P0) -> 19 PCI->APIC IRQ transform: (B3,I1,P0) -> 23 PCI->APIC IRQ transform: (B3,I2,P0) -> 21 PCI->APIC IRQ transform: (B3,I30,P0) -> 18 PCI->APIC IRQ transform: (B7,I2,P0) -> 29 PCI->APIC IRQ transform: (B7,I2,P1) -> 28 PCI->APIC IRQ transform: (B7,I30,P0) -> 17 PCI->APIC IRQ transform: (B11,I1,P0) -> 27 PCI->APIC IRQ transform: (B11,I2,P0) -> 25 PCI->APIC IRQ transform: (B11,I30,P0) -> 17 PCI: Device 00:78 not found by BIOS PCI: Device 00:7b not found by BIOS PCI: Device 00:88 not found by BIOS PCI: Device 00:89 not found by BIOS PCI: Device 00:90 not found by BIOS PCI: Device 00:91 not found by BIOS PCI: Device 00:98 not found by BIOS PCI: Device 00:99 not found by BIOS PCI: Device 00:a0 not found by BIOS PCI: Device 00:a1 not found by BIOS PCI: Device 00:a8 not found by BIOS PCI: Device 00:a9 not found by BIOS PCI: Device 00:b0 not found by BIOS PCI: Device 00:b1 not found by BIOS PCI: Device 00:b8 not found by BIOS PCI: Device 00:c0 not found by BIOS PCI: Device 00:c2 not found by BIOS PCI: Device 00:c4 not found by BIOS PCI: Device 00:c6 not found by BIOS PCI: Device 00:c8 not found by BIOS PCI: Device 00:ca not found by BIOS isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS not found. Total HugeTLB memory allocated, 0 Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Disk quotas vdquot_6.5.1 aio_setup: num_physpages = 2113535 aio_setup: sizeof(struct page) = 60 Hugetlbfs mounted. pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10e NET4: Frame Diverter 0.46 RAMDISK driver initialized: 256 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks CSB5: IDE controller at PCI slot 00:0f.1 SvrWks CSB5: chipset revision 147 SvrWks CSB5: not 100% native mode: will probe irqs later SvrWks CSB5: simplex device: DMA forced ide0: BM-DMA at 0x2820-0x2827, BIOS settings: hda:pio, hdb:pio SvrWks CSB5: simplex device: DMA forced ide1: BM-DMA at 0x2828-0x282f, BIOS settings: hdc:pio, hdd:pio hda: Compaq DVD-ROM DV28EB 01, ATAPI CD/DVD-ROM drive hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hda: set_drive_speed_status: error=0x04 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-floppy driver 0.99.newide ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 524288 buckets, 4096Kbytes TCP: Hash tables configured (established 524288 bind 65536) Linux IP multicast router 0.06 plus PIM-SM Initializing IPsec netlink socket NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 391k freed VFS: Mounted root (ext2 filesystem). SCSI subsystem driver Revision: 1.00 qla2x00_set_info starts at address = f8834060 qla2x00: Found VID=1077 DID=2312 SSVID=e11 SSDID=101 scsi(0): Found a QLA2312 @ bus 7, device 0x2, irq 29, iobase 0xf887c000 scsi(0): Allocated 4096 SRB(s). scsi(0): Configure NVRAM parameters... scsi(0): 64 Bit PCI Addressing Enabled. scsi(0): Scatter/Gather entries= 3584 qla2x00_nvram_config ZIO enabled:intr_timer_delay=3 scsi(0): Verifying loaded RISC code... scsi(0): Verifying chip... scsi(0): LIP reset occurred. scsi(0): Waiting for LIP to complete... scsi(0): LOOP UP detected. scsi(0): Port database changed. scsi(0): Topology - (F_Port), Host Loop address 0xffff scsi(0) qla2x00_isr MBA_PORT_UPDATE ignored qla2x00: Found VID=1077 DID=2312 SSVID=e11 SSDID=101 scsi(1): Found a QLA2312 @ bus 7, device 0x2, irq 28, iobase 0xf887e000 scsi(1): Allocated 4096 SRB(s). scsi(1): Configure NVRAM parameters... scsi(1): 64 Bit PCI Addressing Enabled. scsi(1): Scatter/Gather entries= 3584 qla2x00_nvram_config ZIO enabled:intr_timer_delay=3 scsi(1): Verifying loaded RISC code... scsi(1): Verifying chip... scsi(1): Waiting for LIP to complete... scsi(0) qla2x00_isr MBA_PORT_UPDATE ignored scsi(1): Cable is unplugged... scsi0 : QLogic QLA2312 PCI to Fibre Channel Host Adapter: bus 7 device 2 irq 29 Firmware version: 3.02.13, Driver version 6.06.00b11
scsi1 : QLogic QLA2312 PCI to Fibre Channel Host Adapter: bus 7 device 2 irq 28 Firmware version: 3.02.13, Driver version 6.06.00b11
initializing plug timer for queue 2772f218 Starting timer : 1 1 blk: queue 2772f218, I/O limit 4294967295Mb (mask 0xffffffffffffffff) scsi: unknown type 12 Vendor: COMPAQ Model: MSA1000 Rev: 4.14 Type: Unknown ANSI SCSI revision: 04 initializing plug timer for queue 2772f018 Starting timer : 1 1 blk: queue 2772f018, I/O limit 4294967295Mb (mask 0xffffffffffffffff) Vendor: COMPAQ Model: MSA1000 VOLUME Rev: 4.14 Type: Direct-Access ANSI SCSI revision: 04 initializing plug timer for queue eff19e18 Starting timer : 1 1 blk: queue eff19e18, I/O limit 4294967295Mb (mask 0xffffffffffffffff) Vendor: COMPAQ Model: MSA1000 VOLUME Rev: 4.14 Type: Direct-Access ANSI SCSI revision: 04 initializing plug timer for queue eff19c18 Starting timer : 1 1 blk: queue eff19c18, I/O limit 4294967295Mb (mask 0xffffffffffffffff) scsi(0:0:0:0): Enabled tagged queuing, queue depth 64. scsi(0:0:0:1): Enabled tagged queuing, queue depth 64. scsi(0:0:0:2): Enabled tagged queuing, queue depth 64. initializing plug timer for queue eff19c18 Starting timer : 1 1 Attached scsi disk sda at scsi0, channel 0, id 0, lun 1 Attached scsi disk sdb at scsi0, channel 0, id 0, lun 2 resize_dma_pool: unknown device type 12 SCSI device sda: 511999200 512-byte hdwr sectors (262144 MB) Partition check: sda: sda1 SCSI device sdb: 634985190 512-byte hdwr sectors (325112 MB) sdb: sdb1 sdb2 sdb3 HP CISS Driver (v 2.4.47.RH1) blocks= 71122560 block_size= 512 heads= 255, sectors= 32, cylinders= 8716 RAID 1(0+1)
blocks= 71122560 block_size= 512 heads= 255, sectors= 32, cylinders= 8716 RAID 0
blk: queue 024f39a0, I/O limit 4294967295Mb (mask 0xffffffffffffffff) cciss/c0d0: p1 p2 p3 p4 < p5 p6 > cciss/c0d1: unknown partition table Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 224k freed
Red Hat Enterprise Linux AS release 3 (Taroon) Kernel 2.4.21-3.ELhugemem on - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |