Messages in this thread | | | Date | Sat, 1 Nov 2003 23:04:24 +0100 | From | dav@r00tworl ... | Subject | PROBLEM: IRQ balancing with SMP failed with system load |
| |
hi, i've a trouble with Linux 2.4- kernels on SMP station with XEON processors.
Problem seems to be linked with IRQ generated by network traffic, and occurs after a variable period (a few days or a few weeks, best now is 21 days with RedHat(9) kernel.
IRQ are not rightly balanced between each processor on SMP RedHat 9/x86 system, with too heavy load with high network traffic (and so, a lot of IRQs for NICs).
This occurs with a lot of kernel tested (2.4.20, 2.4.21, 2.4.22, 2.4.22-ac4).
At this time, we are running RedHat kernel :
# cat /proc/version Linux version 2.4.20-8smp (bhcompile@porky.devel.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 SMP Thu Mar 13 17:45:54 EST 2003
# w | head -1 22:34:33 up 21 days, 8:04, 3 users, load average: 1.17, 1.02, 0.99
# ps axuw USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 1372 472 ? S Oct07 0:20 init root 2 0.0 0.0 0 0 ? SW Oct07 0:00 [migration/0] root 3 0.0 0.0 0 0 ? SW Oct07 0:00 [migration/1] root 4 0.0 0.0 0 0 ? SW Oct07 0:00 [migration/2] root 5 0.0 0.0 0 0 ? SW Oct07 0:00 [migration/3] root 6 0.0 0.0 0 0 ? SW Oct07 0:00 [keventd] root 7 6.0 0.0 0 0 ? RWN Oct07 1862:18 [ksoftirqd_CPU0] root 8 0.0 0.0 0 0 ? SWN Oct07 0:00 [ksoftirqd_CPU1] root 9 0.0 0.0 0 0 ? SWN Oct07 0:00 [ksoftirqd_CPU2] root 10 0.0 0.0 0 0 ? SWN Oct07 0:00 [ksoftirqd_CPU3] root 15 0.0 0.0 0 0 ? SW Oct07 0:00 [bdflush] root 11 0.0 0.0 0 0 ? SW Oct07 0:11 [kswapd] root 12 0.0 0.0 0 0 ? SW Oct07 0:00 [kscand/DMA] root 13 0.0 0.0 0 0 ? SW Oct07 4:43 [kscand/Normal] root 14 0.0 0.0 0 0 ? SW Oct07 5:47 [kscand/HighMem] root 16 0.0 0.0 0 0 ? SW Oct07 0:05 [kupdated] root 17 0.0 0.0 0 0 ? SW Oct07 0:00 [mdrecoveryd] root 23 0.0 0.0 0 0 ? SW Oct07 0:00 [aacraid] root 24 0.0 0.0 0 0 ? SW Oct07 0:00 [scsi_eh_0] root 27 0.0 0.0 0 0 ? SW Oct07 0:02 [kjournald] root 84 0.0 0.0 0 0 ? SW Oct07 0:00 [khubd] root 642 0.0 0.0 0 0 ? SW Oct07 0:00 [kjournald] root 643 0.0 0.0 0 0 ? SW Oct07 0:13 [kjournald] root 1210 0.0 0.0 1448 588 ? S Oct07 0:09 syslogd -m 0 root 1214 0.0 0.0 1368 428 ? S Oct07 0:00 klogd -x root 1266 0.0 0.1 3580 1396 ? S Oct07 0:02 /usr/sbin/sshd .../...
This system is used only to route packets (asymetric routing, inside our network to outside only), without iptables rules (due to this trouble but we've planned initialy to set netfilter rules).
When system is loaded (by process ksoftirq_CPU0), some datas are lost (monitorring system reports each 10 minuts CRITICAL alerts => 50% of warning report for packet lost).
report trafic when this issue occurs is like this : .../... eth5|Recv: 2.169G|Sent: 1.591G|Recv Speed: 1.25Kb/s|Sent speed: 1.03Mb/s| eth5|Recv: 2.169G|Sent: 1.591G|Recv Speed: nanb/s|Sent speed: nanb/s| eth5|Recv: 2.169G|Sent: 1.594G|Recv Speed: 0b/s|Sent speed: 776.96Kb/s| eth5|Recv: 2.169G|Sent: 1.596G|Recv Speed: 1.75Kb/s|Sent speed: 958.87Kb/s| eth5|Recv: 2.169G|Sent: 1.599G|Recv Speed: 939b/s|Sent speed: 978.17Kb/s| eth5|Recv: 2.169G|Sent: 1.603G|Recv Speed: 640b/s|Sent speed:1009.87Kb/s| eth5|Recv: 2.169G|Sent: 1.607G|Recv Speed: 85b/s|Sent speed: 1.29Mb/s| eth5|Recv: 2.169G|Sent: 1.611G|Recv Speed: 853b/s|Sent speed: 1.28Mb/s| eth5|Recv: 2.169G|Sent: 1.615G|Recv Speed: 0b/s|Sent speed: 1.68Mb/s| .../...
And we can see :
# cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 184391788 0 0 0 IO-APIC-edge timer 1: 953 0 0 0 IO-APIC-edge keyboard 2: 0 0 0 0 XT-PIC cascade 5: 0 0 0 0 IO-APIC-level usb-ohci 8: 1 0 0 0 IO-APIC-edge rtc 14: 2 0 0 0 IO-APIC-edge ide0 16: 6640100 0 0 0 IO-APIC-level eth0 20: 2347915 0 0 0 IO-APIC-level eth2 21: 3242586 0 0 0 IO-APIC-level eth3 28: 1362515262 0 0 0 IO-APIC-level eth4 29: 1127825818 0 0 0 IO-APIC-level eth5 30: 831193 0 0 0 IO-APIC-level aacraid NMI: 0 0 0 0 LOC: 184394043 184394090 184394090 184394089 ERR: 0 MIS: 0
Datas are transmit like following : --------------------- OUT NETWORK ---------------------->|<--- OUTSIDE (INTERNET) ----- ...applications servers +--------+(eth4) Linux box (eth5)+----------+ router +--- ...
eth4 Link encap:Ethernet HWaddr 00:06:5B:F3:61:5F inet addr:192.168.20.245 Bcast:192.168.20.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2184189475 errors:0 dropped:0 overruns:0 frame:0 TX packets:2195331 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:717500525 (684.2 Mb) TX bytes:153729558 (146.6 Mb) Interrupt:28 eth5 Link encap:Ethernet HWaddr 00:06:5B:F3:61:60 inet addr:194.xxx.xxx.248 Bcast:194.xxx.xxx.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:26145681 errors:0 dropped:0 overruns:0 frame:0 TX packets:2205082845 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:2328890724 (2221.0 Mb) TX bytes:1860452584 (1774.2 Mb) Interrupt:29 Additional informations about system can be found at the end of this message. Thanks if anyone know how to fix or solve this issue ;-(
At this time, the only answer we found is to switch gateway with H.A process, and reboot the box with kernel process "broken" ;-(
dav. --
# cat /proc/modules tg3 52904 2 e100 62340 3 ipt_LOG 4280 0 (autoclean) ipt_limit 1688 0 (autoclean) ipt_REJECT 3928 0 (autoclean) iptable_mangle 2776 0 (autoclean) (unused) ipt_state 1080 0 (autoclean) iptable_nat 22904 0 (autoclean) ip_conntrack 29696 2 (autoclean) [ipt_state iptable_nat] iptable_filter 2412 0 (autoclean) ip_tables 15864 9 [ipt_LOG ipt_limit ipt_REJECT iptable_mangle ipt_state iptable_nat iptable_filter] keybdev 2976 0 (unused) mousedev 5656 0 (unused) hid 22308 0 (unused) input 6208 0 [keybdev mousedev hid] usb-ohci 22216 0 (unused) usbcore 82592 1 [hid usb-ohci] ext3 73376 3 jbd 56336 3 [ext3] aacraid 32580 4 sd_mod 13452 8 scsi_mod 110488 2 [aacraid sd_mod] # cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 01f0-01f7 : ide0 02f8-02ff : serial(auto) 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 08b0-08bf : ServerWorks CSB5 IDE Controller 08b0-08b7 : ide0 08b8-08bf : ide1 0cf8-0cff : PCI conf1 9000-9fff : PCI Bus #07 9800-98ff : Adaptec RAID subsystem HBA (#2) 9c00-9cff : Adaptec RAID subsystem HBA c000-cfff : PCI Bus #03 ccc0-ccdf : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#4) ccc0-ccdf : e100 cce0-ccff : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#3) cce0-ccff : e100 d000-dfff : PCI Bus #02 dcc0-dcdf : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#2) dcc0-dcdf : e100 dce0-dcff : Intel Corp. 82557/8/9 [Ethernet Pro 100] dce0-dcff : e100 e800-e8ff : ATI Technologies Inc Rage XL ec80-ecbf : Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di ece8-ecef : Dell Computer Corporation Embedded Systems Management Device 4 ecf4-ecf7 : PCI device 1028:000d (Dell Computer Corporation) ecf8-ecff : Dell Computer Corporation Embedded Systems Management Device 4
# cat /proc/iomem 00000000-0009ffff : System RAM 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000cc000-000cc5ff : Extension ROM 000f0000-000fffff : System ROM 00100000-3ffeffff : System RAM 00100000-002720eb : Kernel code 002720ec-00383ba3 : Kernel data 3fff0000-3fffebff : ACPI Tables 3fffec00-3fffefff : reserved f0000000-f7ffffff : Dell Computer Corporation PowerEdge Expandable RAID Controller 3 fc300000-fc4fffff : PCI Bus #07 fc3fe000-fc3fefff : Adaptec RAID subsystem HBA (#2) fc3ff000-fc3fffff : Adaptec RAID subsystem HBA fc600000-fc60ffff : Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (#2) fc600000-fc60ffff : tg3 fc610000-fc61ffff : Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet fc610000-fc61ffff : tg3 fc700000-fc7fffff : PCI Bus #03 fc7fe000-fc7fefff : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#4) fc7fe000-fc7fefff : e100 fc7ff000-fc7fffff : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#3) fc7ff000-fc7fffff : e100 fc800000-fc8fffff : PCI Bus #02 fc8fe000-fc8fefff : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#2) fc8fe000-fc8fefff : e100 fc8ff000-fc8fffff : Intel Corp. 82557/8/9 [Ethernet Pro 100] fc8ff000-fc8fffff : e100 fca00000-fccfffff : PCI Bus #03 fca00000-fcafffff : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#4) fca00000-fcafffff : e100 fcb00000-fcbfffff : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#3) fcb00000-fcbfffff : e100 fcd00000-fcffffff : PCI Bus #02 fcd00000-fcdfffff : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#2) fcd00000-fcdfffff : e100 fce00000-fcefffff : Intel Corp. 82557/8/9 [Ethernet Pro 100] fce00000-fcefffff : e100 fd000000-fdffffff : ATI Technologies Inc Rage XL fe100000-fe100fff : ServerWorks OSB4/CSB5 OHCI USB Controller fe100000-fe100fff : usb-ohci fe101000-fe101fff : ATI Technologies Inc Rage XL fe102000-fe102fff : Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di feb00000-feb7ffff : Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di feb80000-feb80fff : Dell Computer Corporation Embedded Systems Management Device 4 fec00000-fec0ffff : reserved fee00000-fee0ffff : reserved fff80000-ffffffff : reserved
00:00.0 Host bridge: ServerWorks CMIC-LE (rev 13) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:00.1 Host bridge: ServerWorks CMIC-LE Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:00.2 Host bridge: ServerWorks: Unknown device 0000 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:04.0 Class ff00: Dell Computer Corporation Embedded Systems Management Device 4 Subsystem: Dell Computer Corporation Embedded Systems Management Device 4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 10 Interrupt: pin A routed to IRQ 19 Region 0: Memory at feb80000 (32-bit, prefetchable) [size=4K] Region 1: I/O ports at ecf8 [size=8] Region 2: I/O ports at ece8 [size=8] Expansion ROM at fe000000 [disabled] [size=64K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:04.1 Class ff00: Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di Subsystem: Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 23 Region 0: Memory at fe102000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at ec80 [size=64] Region 2: Memory at feb00000 (32-bit, prefetchable) [size=512K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:04.2 Class 0c07: Dell Computer Corporation: Unknown device 000d Subsystem: Dell Computer Corporation: Unknown device 000d Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 27 Region 0: I/O ports at ecf4 [size=4] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA]) Subsystem: Dell Computer Corporation: Unknown device 0121 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min), cache line size 10 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at e800 [size=256] Region 2: Memory at fe101000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0f.0 Host bridge: ServerWorks CSB5 South Bridge (rev 93) Subsystem: ServerWorks CSB5 South Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32 00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) (prog-if 82 [Master PriP]) Subsystem: ServerWorks CSB5 IDE Controller Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 0: I/O ports at <ignored> Region 1: I/O ports at <ignored> Region 2: I/O ports at <ignored> Region 3: I/O ports at <ignored> Region 4: I/O ports at 08b0 [size=16] 00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 05) (prog-if 10 [OHCI]) Subsystem: ServerWorks OSB4/CSB5 OHCI USB Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (20000ns max) Interrupt: pin A routed to IRQ 5 Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=4K] 00:0f.3 ISA bridge: ServerWorks GCLE Host Bridge Subsystem: ServerWorks: Unknown device 0230 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:10.0 Host bridge: ServerWorks: Unknown device 0101 (rev 03) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Capabilities: [60] PCI-X non-bridge device. Command: DPERE- ERO- RBC=0 OST=4 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- 00:10.2 Host bridge: ServerWorks: Unknown device 0101 (rev 03) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Capabilities: [60] PCI-X non-bridge device. Command: DPERE- ERO- RBC=0 OST=4 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- 00:11.0 Host bridge: ServerWorks: Unknown device 0101 (rev 03) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Capabilities: [60] PCI-X non-bridge device. Command: DPERE- ERO- RBC=0 OST=4 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- 00:11.2 Host bridge: ServerWorks: Unknown device 0101 (rev 03) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Capabilities: [60] PCI-X non-bridge device. Command: DPERE- ERO- RBC=0 OST=4 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- 01:06.0 PCI bridge: Intel Corp. 21152 PCI-to-PCI Bridge (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 10 Bus: primary=01, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fcd00000-fcffffff Prefetchable memory behind bridge: 00000000fc800000-00000000fc800000 BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ 01:08.0 PCI bridge: Intel Corp. 21152 PCI-to-PCI Bridge (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 10 Bus: primary=01, secondary=03, subordinate=03, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fca00000-fccfffff Prefetchable memory behind bridge: 00000000fc700000-00000000fc700000 BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ 02:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05) Subsystem: Intel Corp. EtherExpress PRO/100+ Dual Port Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min, 14000ns max), cache line size 10 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fc8ff000 (32-bit, prefetchable) [size=4K] Region 1: I/O ports at dce0 [size=32] Region 2: Memory at fce00000 (32-bit, non-prefetchable) [size=1M] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:05.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05) Subsystem: Intel Corp. EtherExpress PRO/100+ Dual Port Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min, 14000ns max), cache line size 10 Interrupt: pin A routed to IRQ 17 Region 0: Memory at fc8fe000 (32-bit, prefetchable) [size=4K] Region 1: I/O ports at dcc0 [size=32] Region 2: Memory at fcd00000 (32-bit, non-prefetchable) [size=1M] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 03:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05) Subsystem: Intel Corp. EtherExpress PRO/100+ Dual Port Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min, 14000ns max), cache line size 10 Interrupt: pin A routed to IRQ 20 Region 0: Memory at fc7ff000 (32-bit, prefetchable) [size=4K] Region 1: I/O ports at cce0 [size=32] Region 2: Memory at fcb00000 (32-bit, non-prefetchable) [size=1M] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 03:05.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05) Subsystem: Intel Corp. EtherExpress PRO/100+ Dual Port Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min, 14000ns max), cache line size 10 Interrupt: pin A routed to IRQ 21 Region 0: Memory at fc7fe000 (32-bit, prefetchable) [size=4K] Region 1: I/O ports at ccc0 [size=32] Region 2: Memory at fca00000 (32-bit, non-prefetchable) [size=1M] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 05:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15) Subsystem: Dell Computer Corporation Broadcom BCM5701 1000Base-T Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (16000ns min), cache line size 10 Interrupt: pin A routed to IRQ 28 Region 0: Memory at fc610000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] PCI-X non-bridge device. Command: DPERE- ERO- RBC=0 OST=0 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable- Address: 52f48734a4062484 Data: c906 05:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15) Subsystem: Dell Computer Corporation Broadcom BCM5701 1000Base-T Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (16000ns min), cache line size 10 Interrupt: pin A routed to IRQ 29 Region 0: Memory at fc600000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] PCI-X non-bridge device. Command: DPERE- ERO- RBC=0 OST=0 Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable- Address: d616aa75c6ef8af0 Data: 80a0 06:08.0 PCI bridge: Intel Corp.: Unknown device 0309 (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 10 Bus: primary=06, secondary=07, subordinate=07, sec-latency=32 I/O behind bridge: 00009000-00009fff Memory behind bridge: fc300000-fc4fffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 06:08.1 RAID bus controller: Dell Computer Corporation PowerEdge Expandable RAID Controller 3 (rev 01) Subsystem: Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 10 Interrupt: pin A routed to IRQ 30 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at fc200000 [disabled] [size=64K] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 07:06.0 SCSI storage controller: Adaptec RAID subsystem HBA (rev 01) Subsystem: Dell Computer Corporation PowerEdge 2550 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (10000ns min, 6250ns max), cache line size 10 Interrupt: pin A routed to IRQ 30 BIST result: 00 Region 0: I/O ports at 9c00 [size=256] Region 1: Memory at fc3ff000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at fc400000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 07:06.1 SCSI storage controller: Adaptec RAID subsystem HBA (rev 01) Subsystem: Dell Computer Corporation PowerEdge 2550 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (10000ns min, 6250ns max), cache line size 10 Interrupt: pin B routed to IRQ 31 BIST result: 00 Region 0: I/O ports at 9800 [size=256] Region 1: Memory at fc3fe000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at fc400000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: DELL Model: PERCRAID RAID10 Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02
# cat /proc/net/netstat TcpExt: SyncookiesSent SyncookiesRecv SyncookiesFailed EmbryonicRsts PruneCalled RcvPruned OfoPruned OutOfWindowIcmps LockDroppedIcmps ArpFilter TW TWRecycled TWKilled PAWSPassive PAWSActive PAWSEstab DelayedACKs DelayedACKLocked DelayedACKLost ListenOverflows ListenDrops TCPPrequeued TCPDirectCopyFromBacklog TCPDirectCopyFromPrequeue TCPPrequeueDropped TCPHPHits TCPHPHitsToUser TCPPureAcks TCPHPAcks TCPRenoRecovery TCPSackRecovery TCPSACKReneging TCPFACKReorder TCPSACKReorder TCPRenoReorder TCPTSReorder TCPFullUndo TCPPartialUndo TCPDSACKUndo TCPLossUndo TCPLoss TCPLostRetransmit TCPRenoFailures TCPSackFailures TCPLossFailures TCPFastRetrans TCPForwardRetrans TCPSlowStartRetrans TCPTimeouts TCPRenoRecoveryFail TCPSackRecoveryFail TCPSchedulerFailed TCPRcvCollapsed TCPDSACKOldSent TCPDSACKOfoSent TCPDSACKRecv TCPDSACKOfoRecv TCPAbortOnSyn TCPAbortOnData TCPAbortOnClose TCPAbortOnMemory TCPAbortOnTimeout TCPAbortOnLinger TCPAbortFailed TCPMemoryPressures TcpExt: 0 0 0 23 0 0 0 0 0 0 5 0 0 0 0 0 17865 1 12 0 0 8574 0 9 0 197814 0 458166 187419 0 77 0 0 0 0 0 0 0 0 3 41 0 0 38 0 89 0 42 118 0 13 0 0 39 0 3 0 0 4 1 0 0 0 0 0 # sh ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux FW2 2.4.20-8smp #1 SMP Thu Mar 13 17:45:54 EST 2003 i686 i686 i386 GNU/Linux Gnu C 18: Gnu make 3.79.1 util-linux 2.11y mount 2.11y modutils 2.4.22 e2fsprogs 1.32 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 2.0.11 Net-tools 1.60 Kbd 1.08 Sh-utils 4.5.3 Modules Loaded tg3 e100 ipt_LOG ipt_limit ipt_REJECT iptable_mangle ipt_state iptable_nat ip_conntrack iptable_filter ip_tables keybdev mousedev hid input usb-ohci usbcore ext3 jbd aacraid sd_mod scsi_mod # cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.40GHz stepping : 7 cpu MHz : 2392.327 cache size : 512 KB physical id : 0 siblings : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 4771.02 processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.40GHz stepping : 7 cpu MHz : 2392.327 cache size : 512 KB physical id : 0 siblings : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 4784.12 processor : 2 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.40GHz stepping : 7 cpu MHz : 2392.327 cache size : 512 KB physical id : 3 siblings : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 4784.12 processor : 3 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.40GHz stepping : 7 cpu MHz : 2392.327 cache size : 512 KB physical id : 3 siblings : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 4784.12
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |