Messages in this thread | | | Subject | Invalid page header errors on 2.6.0-test6 | From | Manoj Srivastava <> | Date | Sun, 05 Oct 2003 00:28:04 -0500 |
| |
Hi,
I am running a 86MB dataset, 250k records, postgresql 7.3.4. I get Invalid page header in block XXX of various tables and keys, in different locations on each run of the same SQL code.
Downgrading to 2.4.22 makes everything work correctly.
I am using lvm2 + devicemapper in both cases, the FS is Ext3. ---------------------------------------------------------------------- [Sat Oct 4 14:23:17 2003] [9413] DBD::Pg::db do failed: ERROR: Invalid page header in block 30 of assets at CnCCalc/Baseline.pm line 979.
next run: [Sat Oct 4 15:01:17 2003] [14924] DBD::Pg::db do failed: ERROR: Invalid page header in block 193 of assets_pkey at CnCCalc/Baseline.pm line 979. ERROR: Invalid page header in block 193 of assets_pkey
next: sv107=# select * from assets sv107-# ; ERROR: Invalid page header in block 3941 of assets
next: [Sat Oct 4 15:42:41 2003] [20926] DBD::Pg::db do failed: ERROR: Invalid page header in block 144 of to_prep_pkey at CnCCalc/Baseline.pm line 979.
next: ERROR: Invalid page header in block 596 of assets_pkey ----------------------------------------------------------------------
I understand there is not much to go on here, but I am not sure how to get more relevant data. I'd be willing to provide any additional requested information.
manoj
====================================================================== __> cat /proc/version Linux version 2.6.0-test6 (root@glaurung) (gcc version 3.3.2 20030908 (Debian prerelease)) #1 SMP Thu Oct 2 16:05:06 CDT 2003
__> cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 6 model name : AMD Athlon(TM) MP 2000+ stepping : 2 cpu MHz : 1666.741 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow bogomips : 3322.67
processor : 1 vendor_id : AuthenticAMD cpu family : 6 model : 6 model name : AMD Athlon(TM) MP 2000+ stepping : 2 cpu MHz : 1666.741 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow bogomips : 3329.22
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller (rev 11) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32 Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M] Region 1: Memory at fb800000 (32-bit, prefetchable) [size=4K] Region 2: I/O ports at e800 [disabled] [size=4] Capabilities: [a0] AGP version 2.0 Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] AGP Bridge (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: df000000-dfcfffff Prefetchable memory behind bridge: dff00000-fb7fffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA (rev 05) Subsystem: Asustek Computer, Inc. A7M-D Mainboard Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at b800 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI (rev 03) Subsystem: Asustek Computer, Inc. A7M-D Mainboard Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:08.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID (rev 01) Subsystem: 3ware Inc 3ware 7000-series ATA-RAID Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2250ns min), cache line size 08 Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at b400 [size=16] Region 1: Memory at de800000 (32-bit, non-prefetchable) [size=16] Region 2: Memory at de000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000a000-0000afff Memory behind bridge: da800000-ddffffff Prefetchable memory behind bridge: dfd00000-dfdfffff BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE] (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc: Unknown device 0f2a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), cache line size 08 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at d800 [size=256] Region 2: Memory at df000000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at dffe0000 [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-768 [Opus] USB (rev 07) (prog-if 10 [OHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 8044 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (20000ns max), cache line size 08 Interrupt: pin D routed to IRQ 19 Region 0: Memory at dd800000 (32-bit, non-prefetchable) [size=4K]
02:04.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) Subsystem: Asustek Computer, Inc. CMI8738 6-channel audio controller Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (500ns min, 6000ns max) Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at a800 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:05.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394 Controller (Link) (prog-if 10 [OHCI]) Subsystem: Texas Instruments: Unknown device 8010 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (750ns min, 1000ns max), cache line size 08 Interrupt: pin A routed to IRQ 18 Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at dc800000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:06.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at a400 [size=128] Region 1: Memory at dc000000 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME-
02:08.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI]) Subsystem: Unknown device 807d:0035 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (250ns min, 10500ns max), cache line size 08 Interrupt: pin A routed to IRQ 19 Region 0: Memory at db800000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:08.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI]) Subsystem: Unknown device 807d:0035 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (250ns min, 10500ns max), cache line size 08 Interrupt: pin B routed to IRQ 16 Region 0: Memory at db000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:08.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20 [EHCI]) Subsystem: Unknown device 807d:1043 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (4000ns min, 8500ns max), cache line size 10 Interrupt: pin C routed to IRQ 17 Region 0: Memory at da800000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-- Money is the root of all evil, and man needs roots. Manoj Srivastava <srivasta@debian.org> <http://www.debian.org/%7Esrivasta/> 1024R/C7261095 print CB D9 F4 12 68 07 E4 05 CC 2D 27 12 1D F5 E8 6E 1024D/BF24424C print 4966 F272 D093 B493 410B 924B 21BA DABB BF24 424C - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |