lkml.org 
[lkml]   [2003]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectregression between 2.4.18 and 2.4.21/22
Something very strange is going on with my machine.  With 2.4.18, I was 
getting 38MB/s on my main system disk (IBM Deskstar 60gxp), and 35 for
the other drives (Western Digital). The IBM drive is on a Promise IDE
controller (ASUS A7V266-E motherboard), and the others are on a PROMISE
2069 UDMA133 controller. However, with 2.4.21 and 2.4.22, it will not
set the using_dma flag for my IBM drive, but sets it for the others,
which now get sustained transfer rates of 46MB/s or greater. I'm using
the same options for all 3 kernels (at least, for the ATA/IDE options).
Any help would be appreciated, and I'll see if maybe I could do
something with it when I get time.

Thanks,

Justin

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:49    [W:3.627 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site