Messages in this thread | | | Date | Mon, 27 Oct 2003 16:15:05 +0100 | From | "Oliver M. Bolzer" <> | Subject | 2.6.0-t9 libata: Promise FastTrak S150 TX4 not working |
| |
Hi!
Several weeks ago, I tested without success the 2.4.22-bk32-libata1 patch with my Promise FastTrak S150 TX4 controller. Seeing that 2.6.0-test9 merged libata, I tryed again, without success.
4 drives are connected to the controller and are configured as 4 seperate arrays (the thing doesn't have a non-RAID-mode) that are working with Promise's partially-binary-only ft3xx driver on 2.4.22.
Below are the contents of /proc/pci on the machine and dmesg output with ATA_DEBUG and ATA_VERBOSE_DEBUG enabled. As it seemed that it could not soft-reset the ports, I also compiled the driver without the ATA_FLAG_SRST flag for my controller. It looks like the driver can recognize the arrays this way but then the kernel enters some kind of endless-loop after DMA timeouts. The dmesg output without ATA_FLAG_SRST ist also included below.
In both cases, the actual error seems to be ATA: abnormal status 0x80 on port 0xF881321C
As I got 8 identical machines with only 3 currenly in beta-use, I'm ready to test any kind of patches to help improve the driver.
### /proc/pci output ###### PCI devices found: Bus 0, device 0, function 0: Host bridge: Intel Corp. 82845G/GL [Brookdale (rev 1). Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff]. Bus 0, device 2, function 0: VGA compatible controller: Intel Corp. 82845G/GL [Brookdale (rev 1). IRQ 16. Prefetchable 32 bit memory at 0xf0000000 [0xf7ffffff]. Non-prefetchable 32 bit memory at 0xfc400000 [0xfc47ffff]. Bus 0, device 29, function 0: USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 1). IRQ 16. I/O at 0x2440 [0x245f]. Bus 0, device 29, function 1: USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 1). IRQ 19. I/O at 0x2460 [0x247f]. Bus 0, device 29, function 2: USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 1). IRQ 18. I/O at 0x2480 [0x249f]. Bus 0, device 29, function 7: USB Controller: Intel Corp. 82801DB USB EHCI Con (rev 1). IRQ 23. Non-prefetchable 32 bit memory at 0xfc480000 [0xfc4803ff]. Bus 0, device 30, function 0: PCI bridge: Intel Corp. 82801BA/CA/DB PCI Br (rev 129). Master Capable. No bursts. Min Gnt=6. Bus 0, device 31, function 0: ISA bridge: Intel Corp. 82801DB ISA Bridge ( (rev 1). Bus 0, device 31, function 1: IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 1). IRQ 18. I/O at 0x24c0 [0x24cf]. Non-prefetchable 32 bit memory at 0x3f800000 [0x3f8003ff]. Bus 0, device 31, function 5: Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 1). IRQ 17. I/O at 0x2000 [0x20ff]. I/O at 0x2400 [0x243f]. Non-prefetchable 32 bit memory at 0xfc480400 [0xfc4805ff]. Non-prefetchable 32 bit memory at 0xfc480600 [0xfc4806ff]. Bus 5, device 4, function 0: RAID bus controller: PCI device 105a:3319 (Promise Technology, ) (rev 2). IRQ 16. Master Capable. Latency=96. Min Gnt=4.Max Lat=18. I/O at 0x1080 [0x10bf]. I/O at 0x1400 [0x140f]. I/O at 0x1000 [0x107f]. Non-prefetchable 32 bit memory at 0xfc530000 [0xfc530fff]. Non-prefetchable 32 bit memory at 0xfc500000 [0xfc51ffff]. Bus 5, device 8, function 0: Ethernet controller: Intel Corp. 82801BD PRO/100 VM ( (rev 129). IRQ 20. Master Capable. Latency=66. Min Gnt=8.Max Lat=56. Non-prefetchable 32 bit memory at 0xfc531000 [0xfc531fff]. I/O at 0x10c0 [0x10ff]. Bus 5, device 10, function 0: Ethernet controller: Altima (nee Broadcom AC9100 Gigabit Ether (rev 21). IRQ 21. Master Capable. Latency=64. Min Gnt=64. Non-prefetchable 64 bit memory at 0xfc520000 [0xfc52ffff].
##### dmesg output, vanilla source (with ATA_FLAG_SRST) Linux version 2.6.0-test9 (bolzer@ravioli) (gcc version 3.2) #12 Mon Oct 27 14:26:29 CET 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009cc00 (usable) BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable) BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 119MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f9bf0 hm, page 000f9000 reserved twice. hm, page 000fa000 reserved twice. hm, page 000ed000 reserved twice. hm, page 000ee000 reserved twice. On node 0 totalpages: 260080 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 30704 pages, LIFO batch:7 DMI 2.3 present. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: COMPAQ Product ID: APIC at: 0xFEE00000 Processor #0 15:2 APIC version 16 I/O APIC #8 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Building zonelist for node : 0 Kernel command line: log_buf_len=128k nfsroot=XXX.XXX.XXX.XXX:/var/cipinstall,rsize=8192,wsize=8192 ip=::::::dhcp BOOT_IMAGE=vmlinuz.install-2.6.0t9-silo log_buf_len: 131072 Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 2525.545 MHz processor. Console: colour VGA+ 80x25 Memory: 1025404k/1040320k available (2196k kernel code, 13964k reserved, 911k data, 152k init, 122816k highmem) Calibrating delay loop... 4980.73 BogoMIPS Security Scaffold v1.0.0 initialized Capability LSM initialized Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 8 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 8 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 8-0, 8-2, 8-5, 8-10, 8-11 not connected. ..TIMER: vector=0x31 pin1=-1 pin2=-1 ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. number of MP IRQ sources: 42. number of IO-APIC #8 registers: 24. testing the IO APIC....................... IO APIC #8...... .... register #00: 08000000 ....... : physical APIC id: 08 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... register #03: 00000001 ....... : Boot DT : 1 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 001 01 0 0 0 0 0 1 1 51 07 001 01 0 0 0 0 0 1 1 59 08 001 01 0 0 0 0 0 1 1 61 09 001 01 0 0 0 0 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 001 01 0 0 0 0 0 1 1 71 0d 001 01 0 0 0 0 0 1 1 79 0e 001 01 0 0 0 0 0 1 1 81 0f 001 01 0 0 0 0 0 1 1 89 10 001 01 1 1 0 1 0 1 1 91 11 001 01 1 1 0 1 0 1 1 99 12 001 01 1 1 0 1 0 1 1 A1 13 001 01 1 1 0 1 0 1 1 A9 14 001 01 1 1 0 1 0 1 1 B1 15 001 01 1 1 0 1 0 1 1 B9 16 001 01 1 1 0 1 0 1 1 C1 17 001 01 1 1 0 1 0 1 1 C9 IRQ to pin mappings: IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2524.0728 MHz. ..... host bus clock speed is 132.0880 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.20 entry at 0xeca48, last bus=5 PCI: Using configuration type 1 mtrr: v2.0 (20020519) Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fefe0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x6627, dseg 0xf0000 PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX [8086/24c0] at 0000:00:1f.0 PCI->APIC IRQ transform: (B0,I2,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B0,I29,P3) -> 23 PCI->APIC IRQ transform: (B0,I31,P0) -> 18 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B5,I4,P0) -> 16 PCI->APIC IRQ transform: (B5,I8,P0) -> 20 PCI->APIC IRQ transform: (B5,I10,P0) -> 21 Machine check exception polling timer started. cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available ikconfig 0.7 with /proc/config* highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). udf: registering filesystem Initializing Cryptographic API pty: 256 Unix98 ptys configured Real Time Clock Driver v1.12 hw_random: RNG not detected Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/100 Network Driver - version 2.3.30-k1 Copyright (c) 2003 Intel Corporation
e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled
tg3.c:v2.2 (August 24, 2003) eth1: Tigon3 [partno(AC91002A1) rev 0105 PHY(5701)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:09:5b:60:df:a3 Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x24c0-0x24c7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x24c8-0x24cf, BIOS settings: hdc:pio, hdd:pio libata version 0.75 loaded. sata_promise version 0.83 ata_device_add: ENTER ata_host_add: ENTER ata_host_add: prd alloc, virt f7ded000, dma 37ded000 ata1: SATA max UDMA/133 cmd 0xF8813200 ctl 0xF8813238 bmdma 0x0 irq 16 ata_host_add: ENTER ata_thread_iter: ata1: thr_state THR_PROBE_START ata_host_add: prd alloc, virt f7dec000, dma 37dec000 ata2: SATA max UDMA/133 cmd 0xF8813280 ctl 0xF88132B8 bmdma 0x0 irq 16 ata_host_add: ENTER ata_thread_iter: ata2: thr_state THR_PROBE_START ata_host_add: prd alloc, virt f7dea000, dma 37dea000 ata3: SATA max UDMA/133 cmd 0xF8813300 ctl 0xF8813338 bmdma 0x0 irq 16 ata_host_add: ENTER ata_thread_iter: ata3: thr_state THR_PROBE_START ata_host_add: prd alloc, virt f7de9000, dma 37de9000 ata4: SATA max UDMA/133 cmd 0xF8813380 ctl 0xF88133B8 bmdma 0x0 irq 16 ata_device_add: probe begin ata_device_add: ata1: probe begin ata_device_add: ata1: probe-wait begin ata_thread_iter: ata4: thr_state THR_PROBE_START ata_thread_iter: ata1: new thr_state THR_PORT_RESET, returning 0 ata_thread_iter: ata1: thr_state THR_PORT_RESET ata_bus_reset: ENTER, host 1, port 0 ata_bus_softreset: ata1: bus reset via SRST ATA: abnormal status 0x80 on port 0xF881321C ata_bus_reset: EXIT ata_dev_identify: ENTER/EXIT (host 1, dev 0) -- nodev ata_dev_identify: ENTER/EXIT (host 1, dev 1) -- nodev ata_thread_iter: ata1: new thr_state THR_PROBE_FAILED, returning 0 ata_thread_iter: ata1: thr_state THR_PROBE_FAILED ata_thread_iter: ata1: new thr_state THR_AWAIT_DEATH, returning 0 ata_thread_iter: ata1: thr_state THR_AWAIT_DEATH ata_thread_iter: ata1: new thr_state THR_AWAIT_DEATH, returning -1 ata1: thread exiting ata_device_add: ata1: probe-wait end scsi0 : sata_promise ata_device_add: ata2: probe begin ata_device_add: ata2: probe-wait begin ata_thread_iter: ata2: new thr_state THR_PORT_RESET, returning 0 ata_thread_iter: ata2: thr_state THR_PORT_RESET ata_bus_reset: ENTER, host 2, port 1 ata_bus_softreset: ata2: bus reset via SRST ATA: abnormal status 0x80 on port 0xF881329C ata_bus_reset: EXIT ata_dev_identify: ENTER/EXIT (host 2, dev 0) -- nodev ata_dev_identify: ENTER/EXIT (host 2, dev 1) -- nodev ata_thread_iter: ata2: new thr_state THR_PROBE_FAILED, returning 0 ata_thread_iter: ata2: thr_state THR_PROBE_FAILED ata_thread_iter: ata2: new thr_state THR_AWAIT_DEATH, returning 0 ata_thread_iter: ata2: thr_state THR_AWAIT_DEATH ata_thread_iter: ata2: new thr_state THR_AWAIT_DEATH, returning -1 ata2: thread exiting ata_device_add: ata2: probe-wait end scsi1 : sata_promise ata_device_add: ata3: probe begin ata_device_add: ata3: probe-wait begin ata_thread_iter: ata3: new thr_state THR_PORT_RESET, returning 0 ata_thread_iter: ata3: thr_state THR_PORT_RESET ata_bus_reset: ENTER, host 3, port 2 ata_bus_softreset: ata3: bus reset via SRST ATA: abnormal status 0x80 on port 0xF881331C ata_bus_reset: EXIT ata_dev_identify: ENTER/EXIT (host 3, dev 0) -- nodev ata_dev_identify: ENTER/EXIT (host 3, dev 1) -- nodev ata_thread_iter: ata3: new thr_state THR_PROBE_FAILED, returning 0 ata_thread_iter: ata3: thr_state THR_PROBE_FAILED ata_thread_iter: ata3: new thr_state THR_AWAIT_DEATH, returning 0 ata_thread_iter: ata3: thr_state THR_AWAIT_DEATH ata_thread_iter: ata3: new thr_state THR_AWAIT_DEATH, returning -1 ata3: thread exiting ata_device_add: ata3: probe-wait end scsi2 : sata_promise ata_device_add: ata4: probe begin ata_device_add: ata4: probe-wait begin ata_thread_iter: ata4: new thr_state THR_PORT_RESET, returning 0 ata_thread_iter: ata4: thr_state THR_PORT_RESET ata_bus_reset: ENTER, host 4, port 3 ata_bus_softreset: ata4: bus reset via SRST ATA: abnormal status 0x80 on port 0xF881339C ata_bus_reset: EXIT ata_dev_identify: ENTER/EXIT (host 4, dev 0) -- nodev ata_dev_identify: ENTER/EXIT (host 4, dev 1) -- nodev ata_thread_iter: ata4: new thr_state THR_PROBE_FAILED, returning 0 ata_thread_iter: ata4: thr_state THR_PROBE_FAILED ata_thread_iter: ata4: new thr_state THR_AWAIT_DEATH, returning 0 ata_thread_iter: ata4: thr_state THR_AWAIT_DEATH ata_thread_iter: ata4: new thr_state THR_AWAIT_DEATH, returning -1 ata4: thread exiting ata_device_add: ata4: probe-wait end scsi3 : sata_promise ata_device_add: probe begin ata_scsi_queuecmd: CDB (1:0,0,0) 12 00 00 00 24 00 de f7 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (1:0,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (1:0,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,0,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,0,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (2:0,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (2:0,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,0,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,0,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (3:0,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (3:0,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,0,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,0,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (4:0,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (4:0,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,0,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,15,0) 12 00 00 00 24 00 00 00 00 ata_device_add: EXIT, returning 4 [...USB...mouting....etc]
##### dmesg output,without ATA_FLAG_SRST Linux version 2.6.0-test9 (bolzer@ravioli) (gcc version 3.2) #15 Mon Oct 27 15:18:34 CET 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009cc00 (usable) BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable) BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 119MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f9bf0 hm, page 000f9000 reserved twice. hm, page 000fa000 reserved twice. hm, page 000ed000 reserved twice. hm, page 000ee000 reserved twice. On node 0 totalpages: 260080 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 30704 pages, LIFO batch:7 DMI 2.3 present. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: COMPAQ Product ID: APIC at: 0xFEE00000 Processor #0 15:2 APIC version 16 I/O APIC #8 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Building zonelist for node : 0 Kernel command line: console=ttyS0 console=tty0 log_buf_len=128k nfsroot=XXX.XXX.XXX.XXX:/var/cipinstall,rsize=8192,wsize=8192 ip=::::::dhcp BOOT_IMAGE=vmlinuz.install-2.6.0t9-silo log_buf_len: 131072 Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 2525.500 MHz processor. Console: colour VGA+ 80x25 Memory: 1025360k/1040320k available (2222k kernel code, 14008k reserved, 925k data, 156k init, 122816k highmem) Calibrating delay loop... 4980.73 BogoMIPS Security Scaffold v1.0.0 initialized Capability LSM initialized Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 8 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 8 ... ok. ..TIMER: vector=0x31 pin1=-1 pin2=-1 ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. testing the IO APIC....................... .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2524.0754 MHz. ..... host bus clock speed is 132.0881 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.20 entry at 0xeca48, last bus=5 PCI: Using configuration type 1 mtrr: v2.0 (20020519) Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fefe0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x6627, dseg 0xf0000 PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX [8086/24c0] at 0000:00:1f.0 PCI->APIC IRQ transform: (B0,I2,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B0,I29,P3) -> 23 PCI->APIC IRQ transform: (B0,I31,P0) -> 18 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B5,I4,P0) -> 16 PCI->APIC IRQ transform: (B5,I8,P0) -> 20 PCI->APIC IRQ transform: (B5,I10,P0) -> 21 Machine check exception polling timer started. cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available ikconfig 0.7 with /proc/config* highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). udf: registering filesystem Initializing Cryptographic API pty: 256 Unix98 ptys configured Real Time Clock Driver v1.12 hw_random: RNG not detected Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/100 Network Driver - version 2.3.30-k1 Copyright (c) 2003 Intel Corporation e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled tg3.c:v2.2 (August 24, 2003) eth1: Tigon3 [partno(AC91002A1) rev 0105 PHY(5701)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:09:5b:60:df:a3 Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x24c0-0x24c7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x24c8-0x24cf, BIOS settings: hdc:pio, hdd:pio ata_device_add: ENTER ata_host_add: ENTER ata_host_add: prd alloc, virt f7de8000, dma 37de8000 ata1: SATA max UDMA/133 cmd 0xF8813200 ctl 0xF8813238 bmdma 0x0 irq 16 ata_host_add: ENTER ata_thread_iter: ata1: thr_state THR_PROBE_START ata_host_add: prd alloc, virt f7de7000, dma 37de7000 ata2: SATA max UDMA/133 cmd 0xF8813280 ctl 0xF88132B8 bmdma 0x0 irq 16 ata_host_add: ENTER ata_thread_iter: ata2: thr_state THR_PROBE_START ata_host_add: prd alloc, virt f7de6000, dma 37de6000 ata3: SATA max UDMA/133 cmd 0xF8813300 ctl 0xF8813338 bmdma 0x0 irq 16 ata_host_add: ENTER ata_thread_iter: ata3: thr_state THR_PROBE_START ata_host_add: prd alloc, virt f7de5000, dma 37de5000 ata4: SATA max UDMA/133 cmd 0xF8813380 ctl 0xF88133B8 bmdma 0x0 irq 16 ata_device_add: probe begin ata_device_add: ata1: probe begin ata_device_add: ata1: probe-wait begin ata_thread_iter: ata1: new thr_state THR_PORT_RESET, returning 0 ata_thread_iter: ata1: thr_state THR_PORT_RESET ata_thread_iter: ata4: thr_state THR_PROBE_START ata_bus_reset: ENTER, host 1, port 0 ata_bus_edd: execute-device-diag ATA: abnormal status 0x80 on port 0xF881321C ata_exec: ata1: cmd 0x90 ata_exec_command_mmio: ata1: cmd 0x90 ata_dev_classify: found ATA device by sig ata_bus_reset: EXIT ata_dev_identify: ENTER, host 1, dev 0 ata_dev_select: ENTER, ata1: device 0, wait 1 ata_dev_identify: do ATA identify ata_exec: ata1: cmd 0xEC ata_exec_command_mmio: ata1: cmd 0xEC ata_dump_id: 49==0x2f00 53==0x0007 63==0x0407 64==0x0003 75==0x0000 ata_dump_id: 80==0x00fe 81==0x001e 82==0x7c6b 83==0x7f09 84==0x4003 ata_dump_id: 88==0x207f 93==0x0000 ata1: dev 0 ATA, max UDMA/133, 398297088 sectors (lba48) ata_dev_identify: EXIT, drv_stat = 0x50 ata_dev_identify: ENTER/EXIT (host 1, dev 1) -- nodev ata_host_set_udma: udma masks: host 0x7F, master 0x7F, slave 0xFF ata_host_set_udma: mask 0x7F i 0x47 j 7 ata_host_set_udma: mask 0x7F i 0x46 j 6 ata_dev_set_xfermode: set features - xfer mode ata_tf_load_mmio: feat 0x3 nsect 0x46 lba 0x0 0x0 0x0 ata_tf_load_mmio: device 0xA0 ata_exec: ata1: cmd 0xEF ata_exec_command_mmio: ata1: cmd 0xEF ata_dev_set_xfermode: EXIT ata1: dev 0 configured for UDMA/133 ata_thread_iter: ata1: new thr_state THR_PROBE_SUCCESS, returning 0 ata_thread_iter: ata1: thr_state THR_PROBE_SUCCESS ata_thread_iter: ata1: new thr_state THR_IDLE, returning 0 ata_device_add: ata1: probe-wait end scsi0 : sata_promise ata_device_add: ata2: probe begin ata_device_add: ata2: probe-wait begin ata_thread_iter: ata2: new thr_state THR_PORT_RESET, returning 0 ata_thread_iter: ata2: thr_state THR_PORT_RESET ata_thread_iter: ata1: thr_state THR_IDLE ata_thread_iter: ata1: new thr_state THR_IDLE, returning 30000 ata_bus_reset: ENTER, host 2, port 1 ata_bus_edd: execute-device-diag ATA: abnormal status 0x80 on port 0xF881329C ata_exec: ata2: cmd 0x90 ata_exec_command_mmio: ata2: cmd 0x90 ata_dev_classify: found ATA device by sig ata_bus_reset: EXIT ata_dev_identify: ENTER, host 2, dev 0 ata_dev_select: ENTER, ata2: device 0, wait 1 ata_dev_identify: do ATA identify ata_exec: ata2: cmd 0xEC ata_exec_command_mmio: ata2: cmd 0xEC ata_dump_id: 49==0x2f00 53==0x0007 63==0x0407 64==0x0003 75==0x0000 ata_dump_id: 80==0x00fe 81==0x001e 82==0x7c6b 83==0x7f09 84==0x4003 ata_dump_id: 88==0x207f 93==0x0000 ata2: dev 0 ATA, max UDMA/133, 398297088 sectors (lba48) ata_dev_identify: EXIT, drv_stat = 0x50 ata_dev_identify: ENTER/EXIT (host 2, dev 1) -- nodev ata_host_set_udma: udma masks: host 0x7F, master 0x7F, slave 0xFF ata_host_set_udma: mask 0x7F i 0x47 j 7 ata_host_set_udma: mask 0x7F i 0x46 j 6 ata_dev_set_xfermode: set features - xfer mode ata_tf_load_mmio: feat 0x3 nsect 0x46 lba 0x0 0x0 0x0 ata_tf_load_mmio: device 0xA0 ata_exec: ata2: cmd 0xEF ata_exec_command_mmio: ata2: cmd 0xEF ata_dev_set_xfermode: EXIT ata2: dev 0 configured for UDMA/133 ata_thread_iter: ata2: new thr_state THR_PROBE_SUCCESS, returning 0 ata_thread_iter: ata2: thr_state THR_PROBE_SUCCESS ata_thread_iter: ata2: new thr_state THR_IDLE, returning 0 ata_device_add: ata2: probe-wait end scsi1 : sata_promise ata_device_add: ata3: probe begin ata_device_add: ata3: probe-wait begin ata_thread_iter: ata3: new thr_state THR_PORT_RESET, returning 0 ata_thread_iter: ata3: thr_state THR_PORT_RESET ata_thread_iter: ata2: thr_state THR_IDLE ata_thread_iter: ata2: new thr_state THR_IDLE, returning 30000 ata_bus_reset: ENTER, host 3, port 2 ata_bus_edd: execute-device-diag ATA: abnormal status 0x80 on port 0xF881331C ata_exec: ata3: cmd 0x90 ata_exec_command_mmio: ata3: cmd 0x90 ata_dev_classify: found ATA device by sig ata_bus_reset: EXIT ata_dev_identify: ENTER, host 3, dev 0 ata_dev_select: ENTER, ata3: device 0, wait 1 ata_dev_identify: do ATA identify ata_exec: ata3: cmd 0xEC ata_exec_command_mmio: ata3: cmd 0xEC ata_dump_id: 49==0x2f00 53==0x0007 63==0x0407 64==0x0003 75==0x0000 ata_dump_id: 80==0x00fe 81==0x001e 82==0x7c6b 83==0x7f09 84==0x4003 ata_dump_id: 88==0x207f 93==0x0000 ata3: dev 0 ATA, max UDMA/133, 398297088 sectors (lba48) ata_dev_identify: EXIT, drv_stat = 0x50 ata_dev_identify: ENTER/EXIT (host 3, dev 1) -- nodev ata_host_set_udma: udma masks: host 0x7F, master 0x7F, slave 0xFF ata_host_set_udma: mask 0x7F i 0x47 j 7 ata_host_set_udma: mask 0x7F i 0x46 j 6 ata_dev_set_xfermode: set features - xfer mode ata_tf_load_mmio: feat 0x3 nsect 0x46 lba 0x0 0x0 0x0 ata_tf_load_mmio: device 0xA0 ata_exec: ata3: cmd 0xEF ata_exec_command_mmio: ata3: cmd 0xEF ata_dev_set_xfermode: EXIT ata3: dev 0 configured for UDMA/133 ata_thread_iter: ata3: new thr_state THR_PROBE_SUCCESS, returning 0 ata_thread_iter: ata3: thr_state THR_PROBE_SUCCESS ata_thread_iter: ata3: new thr_state THR_IDLE, returning 0 ata_device_add: ata3: probe-wait end scsi2 : sata_promise ata_device_add: ata4: probe begin ata_device_add: ata4: probe-wait begin ata_thread_iter: ata4: new thr_state THR_PORT_RESET, returning 0 ata_thread_iter: ata4: thr_state THR_PORT_RESET ata_thread_iter: ata3: thr_state THR_IDLE ata_thread_iter: ata3: new thr_state THR_IDLE, returning 30000 ata_bus_reset: ENTER, host 4, port 3 ata_bus_edd: execute-device-diag ATA: abnormal status 0x80 on port 0xF881339C ata_exec: ata4: cmd 0x90 ata_exec_command_mmio: ata4: cmd 0x90 ata_dev_classify: found ATA device by sig ata_bus_reset: EXIT ata_dev_identify: ENTER, host 4, dev 0 ata_dev_select: ENTER, ata4: device 0, wait 1 ata_dev_identify: do ATA identify ata_exec: ata4: cmd 0xEC ata_exec_command_mmio: ata4: cmd 0xEC ata_dump_id: 49==0x2f00 53==0x0007 63==0x0407 64==0x0003 75==0x0000 ata_dump_id: 80==0x00fe 81==0x001e 82==0x7c6b 83==0x7f09 84==0x4003 ata_dump_id: 88==0x207f 93==0x0000 ata4: dev 0 ATA, max UDMA/133, 398297088 sectors (lba48) ata_dev_identify: EXIT, drv_stat = 0x50 ata_dev_identify: ENTER/EXIT (host 4, dev 1) -- nodev ata_host_set_udma: udma masks: host 0x7F, master 0x7F, slave 0xFF ata_host_set_udma: mask 0x7F i 0x47 j 7 ata_host_set_udma: mask 0x7F i 0x46 j 6 ata_dev_set_xfermode: set features - xfer mode ata_tf_load_mmio: feat 0x3 nsect 0x46 lba 0x0 0x0 0x0 ata_tf_load_mmio: device 0xA0 ata_exec: ata4: cmd 0xEF ata_exec_command_mmio: ata4: cmd 0xEF ata_dev_set_xfermode: EXIT ata4: dev 0 configured for UDMA/133 ata_thread_iter: ata4: new thr_state THR_PROBE_SUCCESS, returning 0 ata_thread_iter: ata4: thr_state THR_PROBE_SUCCESS ata_thread_iter: ata4: new thr_state THR_IDLE, returning 0 ata_device_add: ata4: probe-wait end scsi3 : sata_promise ata_device_add: probe begin ata_scsi_queuecmd: CDB (1:0,0,0) 12 00 00 00 24 00 dd f7 00 ata_scsiop_inq_std: ENTER ata_scsi_queuecmd: CDB (1:0,0,0) 12 00 00 00 61 00 dd f7 00 ata_scsiop_inq_std: ENTER Vendor: ATA Model: Maxtor 6Y200M0 Rev: 0.75 Type: Direct-Access ANSI SCSI revision: 05 ata_scsi_queuecmd: CDB (1:0,0,0) a0 00 00 00 00 00 00 00 04 ata_scsiop_report_luns: ENTER ata_scsi_queuecmd: CDB (1:0,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (1:0,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,0,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,0,0) 12 00 00 00 24 00 00 00 00 ata_scsiop_inq_std: ENTER ata_scsi_queuecmd: CDB (2:0,0,0) 12 00 00 00 61 00 00 00 00 ata_scsiop_inq_std: ENTER Vendor: ATA Model: Maxtor 6Y200M0 Rev: 0.75 Type: Direct-Access ANSI SCSI revision: 05 ata_scsi_queuecmd: CDB (2:0,0,0) a0 00 00 00 00 00 00 00 04 ata_scsiop_report_luns: ENTER ata_scsi_queuecmd: CDB (2:0,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (2:0,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,0,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,0,0) 12 00 00 00 24 00 00 00 00 ata_scsiop_inq_std: ENTER ata_scsi_queuecmd: CDB (3:0,0,0) 12 00 00 00 61 00 00 00 00 ata_scsiop_inq_std: ENTER Vendor: ATA Model: Maxtor 6Y200M0 Rev: 0.75 Type: Direct-Access ANSI SCSI revision: 05 ata_scsi_queuecmd: CDB (3:0,0,0) a0 00 00 00 00 00 00 00 04 ata_scsiop_report_luns: ENTER ata_scsi_queuecmd: CDB (3:0,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (3:0,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,0,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,0,0) 12 00 00 00 24 00 00 00 00 ata_scsiop_inq_std: ENTER ata_scsi_queuecmd: CDB (4:0,0,0) 12 00 00 00 61 00 00 00 00 ata_scsiop_inq_std: ENTER Vendor: ATA Model: Maxtor 6Y200M0 Rev: 0.75 Type: Direct-Access ANSI SCSI revision: 05 ata_scsi_queuecmd: CDB (4:0,0,0) a0 00 00 00 00 00 00 00 04 ata_scsiop_report_luns: ENTER ata_scsi_queuecmd: CDB (4:0,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (4:0,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,0,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,15,0) 12 00 00 00 24 00 00 00 00 ata_device_add: EXIT, returning 4 ata_scsi_queuecmd: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 00 ata_scsiop_noop: ENTER ata_scsi_queuecmd: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00 ata_scsiop_read_cap: ENTER SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) ata_scsi_queuecmd: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_scsiop_mode_sense: ENTER ata_scsi_queuecmd: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 17 ata_scsiop_mode_sense: ENTER SCSI device sda: drive cache: write through sda:<3>ata_scsi_queuecmd: CDB (1:0,0,0) 28 00 00 00 00 00 00 00 08 ata_scsi_rw_queue: ENTER ata_scsi_rw_xlat: reading ata_scsi_rw_xlat: ten-byte command ata_dev_select: ENTER, ata1: device 0, wait 1 ata_sg_setup: ENTER, ata1, use_sg 1 ata_sg_setup: 1 sg elements mapped ata_fill_sg: PRD[0] = (0x37DA7000, 0x1000) ata_tf_load_mmio: hob: feat 0x0 nsect 0x0, lba 0x0 0x0 0x0 ata_tf_load_mmio: feat 0x0 nsect 0x8 lba 0x0 0x0 0x0 ata_tf_load_mmio: device 0xE0 pdc_dma_start: ENTER, ap f7dec9a8, mmio f8813000 pdc_dma_start: val == 80008001 pdc_dma_start: val == 80008001 ata_exec_command_mmio: ata1: cmd 0x25 pdc_dma_start: FIVE ata_scsi_rw_queue: EXIT pdc_interrupt: ENTER pdc_interrupt: port 0 ata_sg_clean: unmapping 1 sg elements pdc_interrupt: port 1 pdc_interrupt: port 2 pdc_interrupt: port 3 pdc_interrupt: EXIT sda1 sda2 sda3 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 ata_scsi_queuecmd: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00 ata_scsiop_noop: ENTER ata_scsi_queuecmd: CDB (2:0,0,0) 25 00 00 00 00 00 00 00 00 ata_scsiop_read_cap: ENTER SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB) ata_scsi_queuecmd: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_scsiop_mode_sense: ENTER ata_scsi_queuecmd: CDB (2:0,0,0) 5a 00 08 00 00 00 00 00 17 ata_scsiop_mode_sense: ENTER SCSI device sdb: drive cache: write through sdb:<3>ata_scsi_queuecmd: CDB (2:0,0,0) 28 00 00 00 00 00 00 00 08 ata_scsi_rw_queue: ENTER ata_scsi_rw_xlat: reading ata_scsi_rw_xlat: ten-byte command ata_dev_select: ENTER, ata2: device 0, wait 1 ata_sg_setup: ENTER, ata2, use_sg 1 ata_sg_setup: 1 sg elements mapped ata_fill_sg: PRD[0] = (0x37DA6000, 0x1000) ata_tf_load_mmio: hob: feat 0x0 nsect 0x0, lba 0x0 0x0 0x0 ata_tf_load_mmio: feat 0x0 nsect 0x8 lba 0x0 0x0 0x0 ata_tf_load_mmio: device 0xE0 pdc_dma_start: ENTER, ap f7dec1a8, mmio f8813000 pdc_dma_start: val == 80008002 pdc_dma_start: val == 80008002 ata_exec_command_mmio: ata2: cmd 0x25 pdc_dma_start: FIVE ata_scsi_rw_queue: EXIT pdc_interrupt: ENTER pdc_interrupt: port 0 pdc_interrupt: port 1 ata_sg_clean: unmapping 1 sg elements pdc_interrupt: port 2 pdc_interrupt: port 3 pdc_interrupt: EXIT ata_thread_iter: ata4: thr_state THR_IDLE ata_thread_iter: ata4: new thr_state THR_IDLE, returning 30000 sdb1 sdb2 sdb3 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 ata_scsi_queuecmd: CDB (3:0,0,0) 00 00 00 00 00 00 00 00 00 ata_scsiop_noop: ENTER ata_scsi_queuecmd: CDB (3:0,0,0) 25 00 00 00 00 00 00 00 00 ata_scsiop_read_cap: ENTER SCSI device sdc: 398297088 512-byte hdwr sectors (203928 MB) ata_scsi_queuecmd: CDB (3:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_scsiop_mode_sense: ENTER ata_scsi_queuecmd: CDB (3:0,0,0) 5a 00 08 00 00 00 00 00 17 ata_scsiop_mode_sense: ENTER SCSI device sdc: drive cache: write through sdc:<3>ata_scsi_queuecmd: CDB (3:0,0,0) 28 00 00 00 00 00 00 00 08 ata_scsi_rw_queue: ENTER ata_scsi_rw_xlat: reading ata_scsi_rw_xlat: ten-byte command ata_dev_select: ENTER, ata3: device 0, wait 1 ata_sg_setup: ENTER, ata3, use_sg 1 ata_sg_setup: 1 sg elements mapped ata_fill_sg: PRD[0] = (0x37DA5000, 0x1000) ata_tf_load_mmio: hob: feat 0x0 nsect 0x0, lba 0x0 0x0 0x0 ata_tf_load_mmio: feat 0x0 nsect 0x8 lba 0x0 0x0 0x0 ata_tf_load_mmio: device 0xE0 pdc_dma_start: ENTER, ap f7fed9a8, mmio f8813000 pdc_dma_start: val == 80008003 pdc_dma_start: val == 80008003 ata_exec_command_mmio: ata3: cmd 0x25 pdc_dma_start: FIVE ata_scsi_rw_queue: EXIT pdc_interrupt: ENTER pdc_interrupt: port 0 pdc_interrupt: port 1 pdc_interrupt: port 2 ata_sg_clean: unmapping 1 sg elements pdc_interrupt: port 3 pdc_interrupt: EXIT sdc1 sdc2 sdc3 Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0 ata_scsi_queuecmd: CDB (4:0,0,0) 00 00 00 00 00 00 00 00 00 ata_scsiop_noop: ENTER ata_scsi_queuecmd: CDB (4:0,0,0) 25 00 00 00 00 00 00 00 00 ata_scsiop_read_cap: ENTER SCSI device sdd: 398297088 512-byte hdwr sectors (203928 MB) ata_scsi_queuecmd: CDB (4:0,0,0) 5a 00 08 00 00 00 00 00 08 ata_scsiop_mode_sense: ENTER ata_scsi_queuecmd: CDB (4:0,0,0) 5a 00 08 00 00 00 00 00 17 ata_scsiop_mode_sense: ENTER SCSI device sdd: drive cache: write through sdd:<3>ata_scsi_queuecmd: CDB (4:0,0,0) 28 00 00 00 00 00 00 00 08 ata_scsi_rw_queue: ENTER ata_scsi_rw_xlat: reading ata_scsi_rw_xlat: ten-byte command ata_dev_select: ENTER, ata4: device 0, wait 1 ata_sg_setup: ENTER, ata4, use_sg 1 ata_sg_setup: 1 sg elements mapped ata_fill_sg: PRD[0] = (0x37DA4000, 0x1000) ata_tf_load_mmio: hob: feat 0x0 nsect 0x0, lba 0x0 0x0 0x0 ata_tf_load_mmio: feat 0x0 nsect 0x8 lba 0x0 0x0 0x0 ata_tf_load_mmio: device 0xE0 pdc_dma_start: ENTER, ap f7fed1a8, mmio f8813000 pdc_dma_start: val == 80008004 pdc_dma_start: val == 80008004 ata_exec_command_mmio: ata4: cmd 0x25 pdc_dma_start: FIVE ata_scsi_rw_queue: EXIT pdc_interrupt: ENTER pdc_interrupt: QUICK EXIT 3 ata_thread_iter: ata1: thr_state THR_IDLE ata_thread_iter: ata1: new thr_state THR_IDLE, returning 30000 ata_thread_iter: ata2: thr_state THR_IDLE ata_thread_iter: ata2: new thr_state THR_IDLE, returning 30000 ata_thread_iter: ata3: thr_state THR_IDLE ata_thread_iter: ata3: new thr_state THR_IDLE, returning 30000 ata_thread_iter: ata4: thr_state THR_IDLE ata_thread_iter: ata4: new thr_state THR_IDLE, returning 30000 ata_scsi_error: ENTER pdc_eng_timeout: ENTER ata4: DMA timeout ata_sg_clean: unmapping 1 sg elements pdc_eng_timeout: EXIT ata_scsi_error: EXIT ata_thread_iter: ata1: thr_state THR_IDLE ata_thread_iter: ata1: new thr_state THR_IDLE, returning 30000 ata_thread_iter: ata2: thr_state THR_IDLE ata_thread_iter: ata2: new thr_state THR_IDLE, returning 30000 ata_thread_iter: ata3: thr_state THR_IDLE ata_thread_iter: ata3: new thr_state THR_IDLE, returning 30000 ata_thread_iter: ata4: thr_state THR_IDLE ata_thread_iter: ata4: new thr_state THR_IDLE, returning 30000 ata_thread_iter: ata1: thr_state THR_IDLE ata_thread_iter: ata1: new thr_state THR_IDLE, returning 30000 ata_thread_iter: ata2: thr_state THR_IDLE ata_thread_iter: ata2: new thr_state THR_IDLE, returning 30000 ata_thread_iter: ata3: thr_state THR_IDLE ata_thread_iter: ata3: new thr_state THR_IDLE, returning 30000 ata_thread_iter: ata4: thr_state THR_IDLE ata_thread_iter: ata4: new thr_state THR_IDLE, returning 30000 ata_thread_iter: ata1: thr_state THR_IDLE ata_thread_iter: ata1: new thr_state THR_IDLE, returning 30000 ata_thread_iter: ata2: thr_state THR_IDLE ata_thread_iter: ata2: new thr_state THR_IDLE, returning 30000 ata_thread_iter: ata3: thr_state THR_IDLE ata_thread_iter: ata3: new thr_state THR_IDLE, returning 30000 [endless loop]
-- Oliver M. Bolzer oliver@gol.com
GPG (PGP) Fingerprint = 621B 52F6 2AC1 36DB 8761 018F 8786 87AD EF50 D1FF - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |