Messages in this thread | | | Date | Thu, 23 Oct 2003 18:59:53 +0200 | From | Pedro Larroy <> | Subject | Re: aborts in usb-storage in branch 2.6 |
| |
On Wed, Oct 22, 2003 at 10:40:50AM -0700, Matthew Dharm wrote: > I need to see more of the log than just this. > > Matt >
On Wed, Oct 22, 2003 at 10:02:32AM -0400, Alan Stern wrote: > Can you send more of the debugging log? The portion you included didn't > contain any context, making it hard to judge what the problem was. > > Alan Stern
I can send anything you need. Here it goes some extended log.
I've noticed that abort are after ACPI debug statements. But seems acpi and usb are not sharing irqs.
CPU0 0: 298778 IO-APIC-edge timer 1: 1775 IO-APIC-edge i8042 2: 0 XT-PIC cascade 8: 4 IO-APIC-edge rtc 9: 56 IO-APIC-level acpi 12: 39 IO-APIC-edge i8042 14: 13833 IO-APIC-edge ide0 15: 1 IO-APIC-edge ide1 16: 0 IO-APIC-level uhci_hcd 17: 83 IO-APIC-level Intel 82801DB-ICH4 18: 0 IO-APIC-level uhci_hcd 19: 1069 IO-APIC-level uhci_hcd, eth0 20: 0 IO-APIC-level yenta 21: 0 IO-APIC-level yenta 23: 10276 IO-APIC-level ehci_hcd NMI: 0 LOC: 298713 ERR: 0 MIS: 0
abort.log -> 2.6.0test8 devices -> 2.6.0test8 kernel.log -> 2.6.0testx where x < 8
In abort.log, is the paste of the log with kernel 2.6.0test8 in kern.log there is a log from 2.6.0test4 or 2.6.0test4-mm
On previous 2.6.0testx kernels the bug appeared to trigger when ACPI debug statements were printed, notice there are aborts after ACPI printks.
On 2.6.0test8 it seems to be triggered when doing concurrent access to the filesystem.
I would like to help in anyway I can, but ACPI and USB is far beyond my kernel knowledge, so I'm not currently able to fix the bugs myself.
Just ask if you need more information. Thanks.
Regards.
-- Pedro Larroy Tovar | piotr%member.fsf.org
Software patents are a threat to innovation in Europe please check: http://www.eurolinux.org/ [unhandled content-type:application/octet-stream][unhandled content-type:application/octet-stream] T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.0-test8 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.2 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.0-test8 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.1 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=046d ProdID=c00f Rev=11.10 S: Manufacturer=Logitech S: Product=USB-PS/2 Optical Mouse C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.0-test8 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.0 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.0-test8 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1d.7 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=04b4 ProdID=6830 Rev= 0.01 S: Manufacturer=Cypress Semiconductor S: Product=USB2.0 Storage Device S: SerialNumber=000000000383 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
| |